[ARM] 3672/1: PXA: don't probe output GPIOs for interrupt

Patch from Guennadi Liakhovetski

Currently probe_irq_on() on PXA will silently reconfigure all output GPIOs, that are not configured as alternate functions, for input. Avoid that. Upon CPU reset all GPIOs are configured as inputs, so, if a GPIO is configured as output, it has been done so intentionally.

Signed-off-by: G. Liakhovetski <gl@dsa-ac.de>
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 2 insertions, 2 deletions

diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 539b596005fc..d9635ff4b10c 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -88,8 +88,8 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
 
         if (type == IRQT_PROBE) {
             /* Don't mess with enabled GPIOs using preconfigured edges or
-               GPIOs set to alternate function during probe */
-                if ((GPIO_IRQ_rising_edge[idx] | GPIO_IRQ_falling_edge[idx]) &
+               GPIOs set to alternate function or to output during probe */
+                if ((GPIO_IRQ_rising_edge[idx] | GPIO_IRQ_falling_edge[idx] | GPDR(gpio)) &
                     GPIO_bit(gpio))
                         return 0;
                 if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2)))