[ARM] 4560/1: pxa: move processor specific set_wake logic out of irq.c

a function pxa_init_irq_set_wake() was introduced, so that
processor specific code could install their own version

code setting PFER and PRER registers within pxa_gpio_irq_type
are removed, and the edge configuration is postponed to the
(*set_wake) and copies the GRER and GFER register, which will
always be set up correctly by pxa_gpio_irq_type()

Signed-off-by: eric miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 63 insertions, 7 deletions

diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index d193755afb2b..2d7fc39732e4 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -306,6 +306,69 @@ static void __init pxa27x_init_pm(void)
 }
 #endif
 
+/* PXA27x:  Various gpios can issue wakeup events.  This logic only
+ * handles the simple cases, not the WEMUX2 and WEMUX3 options
+ */
+#define PXA27x_GPIO_NOWAKE_MASK \
+        ((1 << 8) | (1 << 7) | (1 << 6) | (1 << 5) | (1 << 2))
+#define WAKEMASK(gpio) \
+        (((gpio) <= 15) \
+                 ? ((1 << (gpio)) & ~PXA27x_GPIO_NOWAKE_MASK) \
+                 : ((gpio == 35) ? (1 << 24) : 0))
+
+static int pxa27x_set_wake(unsigned int irq, unsigned int on)
+{
+        int gpio = IRQ_TO_GPIO(irq);
+        uint32_t mask;
+
+        if ((gpio >= 0 && gpio <= 15) || (gpio == 35)) {
+                if (WAKEMASK(gpio) == 0)
+                        return -EINVAL;
+
+                mask = WAKEMASK(gpio);
+
+                if (on) {
+                        if (GRER(gpio) | GPIO_bit(gpio))
+                                PRER |= mask;
+                        else
+                                PRER &= ~mask;
+
+                        if (GFER(gpio) | GPIO_bit(gpio))
+                                PFER |= mask;
+                        else
+                                PFER &= ~mask;
+                }
+                goto set_pwer;
+        }
+
+        switch (irq) {
+        case IRQ_RTCAlrm:
+                mask = PWER_RTC;
+                break;
+        case IRQ_USB:
+                mask = 1u << 26;
+                break;
+        default:
+                return -EINVAL;
+        }
+
+set_pwer:
+        if (on)
+                PWER |= mask;
+        else
+                PWER &=~mask;
+
+        return 0;
+}
+
+void __init pxa27x_init_irq(void)
+{
+        pxa_init_irq_low();
+        pxa_init_irq_high();
+        pxa_init_irq_gpio(128);
+        pxa_init_irq_set_wake(pxa27x_set_wake);
+}
+
 /*
  * device registration specific to PXA27x.
  */
@@ -375,13 +438,6 @@ static struct platform_device *devices[] __initdata = {
         &pxa27x_device_ohci,
 };
 
-void __init pxa27x_init_irq(void)
-{
-        pxa_init_irq_low();
-        pxa_init_irq_high();
-        pxa_init_irq_gpio(128);
-}
-
 static int __init pxa27x_init(void)
 {
         int ret = 0;