[ARM] 4744/1: pcm027: add support for phyCORE-PXA270 CPU module

This patch adds main support for the generic phyCORE-PXA270 CPU module
(aka PCM-027). Its as generic as possible to support any kind of baseboard.

Note: Neither the CPU module nor the pcm027.c implementation can work without
a baseboard support. Baseboard support can be added by the PCM-990 or any
custom variant.

V2:
 After comments by Eric Miao:
  - Currently unsupported devices moved into separate patch
  - direct call of baseboard initialisation

V3:
 After comments by Russell King
  - sort include files
  - setting RTC bit for power control removed
 - style problems fixed (discovered by checkpatch.pl)

Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 216 insertions, 0 deletions

diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
new file mode 100644
index 000000000000..540c3bba5f9a
--- /dev/null
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -0,0 +1,216 @@
+/*
+ *  linux/arch/arm/mach-pxa/pcm027.c
+ *  Support for the Phytec phyCORE-PXA270 CPU card (aka PCM-027).
+ *
+ *  Refer
+ *   http://www.phytec.com/products/sbc/ARM-XScale/phyCORE-XScale-PXA270.html
+ *  for additional hardware info
+ *
+ *  Author:     Juergen Kilb
+ *  Created:    April 05, 2005
+ *  Copyright:  Phytec Messtechnik GmbH
+ *  e-Mail:     armlinux@phytec.de
+ *
+ *  based on Intel Mainstone Board
+ *
+ *  Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de)
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx_spi.h>
+#include <asm/arch/pcm027.h>
+#include "generic.h"
+
+/*
+ * ABSTRACT:
+ *
+ * The PXA270 processor comes with a bunch of hardware on its silicon.
+ * Not all of this hardware can be used at the same time and not all
+ * is routed to module's connectors. Also it depends on the baseboard, what
+ * kind of hardware can be used in which way.
+ * -> So this file supports the main devices on the CPU card only!
+ * Refer pcm990-baseboard.c how to extend this features to get a full
+ * blown system with many common interfaces.
+ *
+ * The PCM-027 supports the following interfaces through its connectors and
+ * will be used in pcm990-baseboard.c:
+ *
+ * - LCD support
+ * - MMC support
+ * - IDE/CF card
+ * - FFUART
+ * - BTUART
+ * - IRUART
+ * - AC97
+ * - SSP
+ * - SSP3
+ *
+ * Claimed GPIOs:
+ * GPIO0 -> IRQ input from RTC
+ * GPIO2 -> SYS_ENA*)
+ * GPIO3 -> PWR_SCL
+ * GPIO4 -> PWR_SDA
+ * GPIO5 -> PowerCap0*)
+ * GPIO6 -> PowerCap1*)
+ * GPIO7 -> PowerCap2*)
+ * GPIO8 -> PowerCap3*)
+ * GPIO15 -> /CS1
+ * GPIO20 -> /CS2
+ * GPIO21 -> /CS3
+ * GPIO33 -> /CS5 network controller select
+ * GPIO52 -> IRQ from network controller
+ * GPIO78 -> /CS2
+ * GPIO80 -> /CS4
+ * GPIO90 -> LED0
+ * GPIO91 -> LED1
+ * GPIO114 -> IRQ from CAN controller
+ * GPIO117 -> SCL
+ * GPIO118 -> SDA
+ *
+ * *) CPU internal use only
+ */
+
+/*
+ * SMC91x network controller specific stuff
+ */
+static struct resource smc91x_resources[] = {
+        [0] = {
+                .start  = PCM027_ETH_PHYS + 0x300,
+                .end    = PCM027_ETH_PHYS + PCM027_ETH_SIZE,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = PCM027_ETH_IRQ,
+                .end    = PCM027_ETH_IRQ,
+                /* note: smc91x's driver doesn't use the trigger bits yet */
+                .flags  = IORESOURCE_IRQ | PCM027_ETH_IRQ_EDGE,
+        }
+};
+
+static struct platform_device smc91x_device = {
+        .name           = "smc91x",
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(smc91x_resources),
+        .resource       = smc91x_resources,
+};
+
+static struct physmap_flash_data pcm027_flash_data = {
+        .width  = 4,
+};
+
+static struct resource pcm027_flash_resource = {
+        .start          = PCM027_FLASH_PHYS,
+        .end            = PCM027_FLASH_PHYS + PCM027_FLASH_SIZE - 1 ,
+        .flags          = IORESOURCE_MEM,
+};
+
+static struct platform_device pcm027_flash = {
+        .name           = "physmap-flash",
+        .id             = 0,
+        .dev            = {
+                .platform_data  = &pcm027_flash_data,
+        },
+        .resource       = &pcm027_flash_resource,
+        .num_resources  = 1,
+};
+
+#ifdef CONFIG_LEDS_GPIO
+
+static struct gpio_led pcm027_led[] = {
+        {
+                .name = "led0:red",     /* FIXME */
+                .gpio = PCM027_LED_CPU
+        },
+        {
+                .name = "led1:green",   /* FIXME */
+                .gpio = PCM027_LED_HEARD_BEAT
+        },
+};
+
+static struct gpio_led_platform_data pcm027_led_data = {
+        .num_leds       = ARRAY_SIZE(pcm027_led),
+        .leds           = pcm027_led
+};
+
+static struct platform_device pcm027_led_dev = {
+        .name           = "leds-gpio",
+        .id             = 0,
+        .dev            = {
+                .platform_data  = &pcm027_led_data,
+        },
+};
+
+#endif /* CONFIG_LEDS_GPIO */
+
+/*
+ * declare the available device resources on this board
+ */
+static struct platform_device *devices[] __initdata = {
+        &smc91x_device,
+        &pcm027_flash,
+#ifdef CONFIG_LEDS_GPIO
+        &pcm027_led_dev
+#endif
+};
+
+/*
+ * pcm027_init - breath some life into the board
+ */
+static void __init pcm027_init(void)
+{
+        /* system bus arbiter setting
+         * - Core_Park
+         * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
+         */
+        ARB_CNTRL = ARB_CORE_PARK | 0x234;
+
+        platform_add_devices(devices, ARRAY_SIZE(devices));
+
+        /* LEDs (on demand only) */
+#ifdef CONFIG_LEDS_GPIO
+        pxa_gpio_mode(PCM027_LED_CPU | GPIO_OUT);
+        pxa_gpio_mode(PCM027_LED_HEARD_BEAT | GPIO_OUT);
+#endif /* CONFIG_LEDS_GPIO */
+
+        /* at last call the baseboard to initialize itself */
+#ifdef CONFIG_MACH_PCM990_BASEBOARD
+        pcm990_baseboard_init();
+#endif
+}
+
+static void __init pcm027_map_io(void)
+{
+        pxa_map_io();
+
+        /* initialize sleep mode regs (wake-up sources, etc) */
+        PGSR0 = 0x01308000;
+        PGSR1 = 0x00CF0002;
+        PGSR2 = 0x0E294000;
+        PGSR3 = 0x0000C000;
+        PWER  = 0x40000000 | PWER_GPIO0 | PWER_GPIO1;
+        PRER  = 0x00000000;
+        PFER  = 0x00000003;
+}
+
+MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270")
+        /* Maintainer: Pengutronix */
+        .boot_params    = 0xa0000100,
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .map_io         = pcm027_map_io,
+        .init_irq       = pxa27x_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = pcm027_init,
+MACHINE_END