Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 247 insertions, 0 deletions

diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
new file mode 100644
index 000000000000..dd012d6e2f5c
--- /dev/null
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -0,0 +1,247 @@
+/*
+ *  linux/arch/arm/mach-pxa/lubbock.c
+ *
+ *  Support for the Intel DBPXA250 Development Platform.
+ *
+ *  Author:     Nicolas Pitre
+ *  Created:    Jun 15, 2001
+ *  Copyright:  MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/major.h>
+#include <linux/fb.h>
+#include <linux/interrupt.h>
+
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware/sa1111.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/lubbock.h>
+#include <asm/arch/udc.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/mmc.h>
+
+#include "generic.h"
+
+
+#define LUB_MISC_WR             __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
+
+void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
+{
+        unsigned long flags;
+
+        local_irq_save(flags);
+        LUB_MISC_WR = (LUB_MISC_WR & ~mask) | (set & mask);
+        local_irq_restore(flags);
+}
+EXPORT_SYMBOL(lubbock_set_misc_wr);
+
+static unsigned long lubbock_irq_enabled;
+
+static void lubbock_mask_irq(unsigned int irq)
+{
+        int lubbock_irq = (irq - LUBBOCK_IRQ(0));
+        LUB_IRQ_MASK_EN = (lubbock_irq_enabled &= ~(1 << lubbock_irq));
+}
+
+static void lubbock_unmask_irq(unsigned int irq)
+{
+        int lubbock_irq = (irq - LUBBOCK_IRQ(0));
+        /* the irq can be acknowledged only if deasserted, so it's done here */
+        LUB_IRQ_SET_CLR &= ~(1 << lubbock_irq);
+        LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq));
+}
+
+static struct irqchip lubbock_irq_chip = {
+        .ack            = lubbock_mask_irq,
+        .mask           = lubbock_mask_irq,
+        .unmask         = lubbock_unmask_irq,
+};
+
+static void lubbock_irq_handler(unsigned int irq, struct irqdesc *desc,
+                                struct pt_regs *regs)
+{
+        unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
+        do {
+                GEDR(0) = GPIO_bit(0);  /* clear our parent irq */
+                if (likely(pending)) {
+                        irq = LUBBOCK_IRQ(0) + __ffs(pending);
+                        desc = irq_desc + irq;
+                        desc->handle(irq, desc, regs);
+                }
+                pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
+        } while (pending);
+}
+
+static void __init lubbock_init_irq(void)
+{
+        int irq;
+
+        pxa_init_irq();
+
+        /* setup extra lubbock irqs */
+        for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) {
+                set_irq_chip(irq, &lubbock_irq_chip);
+                set_irq_handler(irq, do_level_IRQ);
+                set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+        }
+
+        set_irq_chained_handler(IRQ_GPIO(0), lubbock_irq_handler);
+        set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
+}
+
+static int lubbock_udc_is_connected(void)
+{
+        return (LUB_MISC_RD & (1 << 9)) == 0;
+}
+
+static struct pxa2xx_udc_mach_info udc_info __initdata = {
+        .udc_is_connected       = lubbock_udc_is_connected,
+        // no D+ pullup; lubbock can't connect/disconnect in software
+};
+
+static struct resource sa1111_resources[] = {
+        [0] = {
+                .start  = 0x10000000,
+                .end    = 0x10001fff,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = LUBBOCK_SA1111_IRQ,
+                .end    = LUBBOCK_SA1111_IRQ,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device sa1111_device = {
+        .name           = "sa1111",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(sa1111_resources),
+        .resource       = sa1111_resources,
+};
+
+static struct resource smc91x_resources[] = {
+        [0] = {
+                .name   = "smc91x-regs",
+                .start  = 0x0c000000,
+                .end    = 0x0c0fffff,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = LUBBOCK_ETH_IRQ,
+                .end    = LUBBOCK_ETH_IRQ,
+                .flags  = IORESOURCE_IRQ,
+        },
+        [2] = {
+                .name   = "smc91x-attrib",
+                .start  = 0x0e000000,
+                .end    = 0x0e0fffff,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+static struct platform_device smc91x_device = {
+        .name           = "smc91x",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(smc91x_resources),
+        .resource       = smc91x_resources,
+};
+
+static struct platform_device *devices[] __initdata = {
+        &sa1111_device,
+        &smc91x_device,
+};
+
+static struct pxafb_mach_info sharp_lm8v31 __initdata = {
+        .pixclock       = 270000,
+        .xres           = 640,
+        .yres           = 480,
+        .bpp            = 16,
+        .hsync_len      = 1,
+        .left_margin    = 3,
+        .right_margin   = 3,
+        .vsync_len      = 1,
+        .upper_margin   = 0,
+        .lower_margin   = 0,
+        .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+        .cmap_greyscale = 0,
+        .cmap_inverse   = 0,
+        .cmap_static    = 0,
+        .lccr0          = LCCR0_SDS,
+        .lccr3          = LCCR3_PCP | LCCR3_Acb(255),
+};
+
+static int lubbock_mci_init(struct device *dev, irqreturn_t (*lubbock_detect_int)(int, void *, struct pt_regs *), void *data)
+{
+        /* setup GPIO for PXA25x MMC controller */
+        pxa_gpio_mode(GPIO6_MMCCLK_MD);
+        pxa_gpio_mode(GPIO8_MMCCS0_MD);
+
+        return 0;
+}
+
+static struct pxamci_platform_data lubbock_mci_platform_data = {
+        .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
+        .init           = lubbock_mci_init,
+};
+
+static void __init lubbock_init(void)
+{
+        pxa_set_udc_info(&udc_info);
+        set_pxa_fb_info(&sharp_lm8v31);
+        pxa_set_mci_info(&lubbock_mci_platform_data);
+        (void) platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static struct map_desc lubbock_io_desc[] __initdata = {
+  { LUBBOCK_FPGA_VIRT, LUBBOCK_FPGA_PHYS, 0x00100000, MT_DEVICE }, /* CPLD */
+};
+
+static void __init lubbock_map_io(void)
+{
+        pxa_map_io();
+        iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
+
+        /* This enables the BTUART */
+        pxa_gpio_mode(GPIO42_BTRXD_MD);
+        pxa_gpio_mode(GPIO43_BTTXD_MD);
+        pxa_gpio_mode(GPIO44_BTCTS_MD);
+        pxa_gpio_mode(GPIO45_BTRTS_MD);
+
+        /* This is for the SMC chip select */
+        pxa_gpio_mode(GPIO79_nCS_3_MD);
+
+        /* setup sleep mode values */
+        PWER  = 0x00000002;
+        PFER  = 0x00000000;
+        PRER  = 0x00000002;
+        PGSR0 = 0x00008000;
+        PGSR1 = 0x003F0202;
+        PGSR2 = 0x0001C000;
+        PCFR |= PCFR_OPDE;
+}
+
+MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
+        MAINTAINER("MontaVista Software Inc.")
+        BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000))
+        MAPIO(lubbock_map_io)
+        INITIRQ(lubbock_init_irq)
+        .timer          = &pxa_timer,
+        INIT_MACHINE(lubbock_init)
+MACHINE_END