[ARM] pxa: move i2c register and bit definitions into i2c-pxa.c

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 1 insertions, 43 deletions

diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h
index 772c67635e23..b6b80f63b4de 100644
--- a/arch/arm/mach-pxa/include/mach/pxa-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h
@@ -418,51 +418,9 @@
 
 
 /*
- * I2C registers
+ * I2C registers - moved into drivers/i2c/busses/i2c-pxa.c
  */
 
-#define IBMR            __REG(0x40301680)  /* I2C Bus Monitor Register - IBMR */
-#define IDBR            __REG(0x40301688)  /* I2C Data Buffer Register - IDBR */
-#define ICR             __REG(0x40301690)  /* I2C Control Register - ICR */
-#define ISR             __REG(0x40301698)  /* I2C Status Register - ISR */
-#define ISAR            __REG(0x403016A0)  /* I2C Slave Address Register - ISAR */
-
-#define PWRIBMR    __REG(0x40f00180)  /* Power I2C Bus Monitor Register-IBMR */
-#define PWRIDBR    __REG(0x40f00188)  /* Power I2C Data Buffer Register-IDBR */
-#define PWRICR __REG(0x40f00190)  /* Power I2C Control Register - ICR */
-#define PWRISR __REG(0x40f00198)  /* Power I2C Status Register - ISR */
-#define PWRISAR    __REG(0x40f001A0)  /*Power I2C Slave Address Register-ISAR */
-
-#define ICR_START       (1 << 0)           /* start bit */
-#define ICR_STOP        (1 << 1)           /* stop bit */
-#define ICR_ACKNAK      (1 << 2)           /* send ACK(0) or NAK(1) */
-#define ICR_TB          (1 << 3)           /* transfer byte bit */
-#define ICR_MA          (1 << 4)           /* master abort */
-#define ICR_SCLE        (1 << 5)           /* master clock enable */
-#define ICR_IUE         (1 << 6)           /* unit enable */
-#define ICR_GCD         (1 << 7)           /* general call disable */
-#define ICR_ITEIE       (1 << 8)           /* enable tx interrupts */
-#define ICR_IRFIE       (1 << 9)           /* enable rx interrupts */
-#define ICR_BEIE        (1 << 10)          /* enable bus error ints */
-#define ICR_SSDIE       (1 << 11)          /* slave STOP detected int enable */
-#define ICR_ALDIE       (1 << 12)          /* enable arbitration interrupt */
-#define ICR_SADIE       (1 << 13)          /* slave address detected int enable */
-#define ICR_UR          (1 << 14)          /* unit reset */
-#define ICR_FM          (1 << 15)          /* fast mode */
-
-#define ISR_RWM         (1 << 0)           /* read/write mode */
-#define ISR_ACKNAK      (1 << 1)           /* ack/nak status */
-#define ISR_UB          (1 << 2)           /* unit busy */
-#define ISR_IBB         (1 << 3)           /* bus busy */
-#define ISR_SSD         (1 << 4)           /* slave stop detected */
-#define ISR_ALD         (1 << 5)           /* arbitration loss detected */
-#define ISR_ITE         (1 << 6)           /* tx buffer empty */
-#define ISR_IRF         (1 << 7)           /* rx buffer full */
-#define ISR_GCAD        (1 << 8)           /* general call address detected */
-#define ISR_SAD         (1 << 9)           /* slave address detected */
-#define ISR_BED         (1 << 10)          /* bus error no ACK/NAK */
-
-
 /*
  * Serial Audio Controller
  */