Merge branch 'devel-stable' into devel

9 files changed, 204 insertions, 80 deletions

diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
index 1a741065045f..eec92e6fd7cf 100644
--- a/arch/arm/mach-pxa/include/mach/balloon3.h
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -26,21 +26,55 @@ enum balloon3_features {
 #define BALLOON3_FPGA_VIRT      (0xf1000000)    /* as per balloon2 */
 #define BALLOON3_FPGA_LENGTH    0x01000000
 
-/* FPGA/CPLD registers */
-#define BALLOON3_PCMCIA0_REG            (BALLOON3_FPGA_VIRT + 0x00e00008)
-/* fixme - same for now */
-#define BALLOON3_PCMCIA1_REG            (BALLOON3_FPGA_VIRT + 0x00e00008)
-#define BALLOON3_NANDIO_IO_REG          (BALLOON3_FPGA_VIRT + 0x00e00000)
+/* FPGA / CPLD registers for CF socket */
+#define BALLOON3_CF_STATUS_REG          (BALLOON3_FPGA_VIRT + 0x00e00008)
+#define BALLOON3_CF_CONTROL_REG         (BALLOON3_FPGA_VIRT + 0x00e00008)
+/* FPGA / CPLD version register */
+#define BALLOON3_FPGA_VER               (BALLOON3_FPGA_VIRT + 0x00e0001c)
+/* FPGA / CPLD registers for NAND flash */
+#define BALLOON3_NAND_BASE              (PXA_CS4_PHYS + 0x00e00000)
+#define BALLOON3_NAND_IO_REG            (BALLOON3_FPGA_VIRT + 0x00e00000)
+#define BALLOON3_NAND_CONTROL2_REG      (BALLOON3_FPGA_VIRT + 0x00e00010)
+#define BALLOON3_NAND_STAT_REG          (BALLOON3_FPGA_VIRT + 0x00e00010)
+#define BALLOON3_NAND_CONTROL_REG       (BALLOON3_FPGA_VIRT + 0x00e00014)
+
 /* fpga/cpld interrupt control register */
 #define BALLOON3_INT_CONTROL_REG        (BALLOON3_FPGA_VIRT + 0x00e0000C)
-#define BALLOON3_NANDIO_CTL2_REG        (BALLOON3_FPGA_VIRT + 0x00e00010)
-#define BALLOON3_NANDIO_CTL_REG         (BALLOON3_FPGA_VIRT + 0x00e00014)
 #define BALLOON3_VERSION_REG            (BALLOON3_FPGA_VIRT + 0x00e0001c)
 
 #define BALLOON3_SAMOSA_ADDR_REG        (BALLOON3_FPGA_VIRT + 0x00c00000)
 #define BALLOON3_SAMOSA_DATA_REG        (BALLOON3_FPGA_VIRT + 0x00c00004)
 #define BALLOON3_SAMOSA_STATUS_REG      (BALLOON3_FPGA_VIRT + 0x00c0001c)
 
+/* CF Status Register bits (read-only) bits */
+#define BALLOON3_CF_nIRQ                (1 << 0)
+#define BALLOON3_CF_nSTSCHG_BVD1        (1 << 1)
+
+/* CF Control Set Register bits / CF Control Clear Register bits (write-only) */
+#define BALLOON3_CF_RESET               (1 << 0)
+#define BALLOON3_CF_ENABLE              (1 << 1)
+#define BALLOON3_CF_ADD_ENABLE          (1 << 2)
+
+/* CF Interrupt sources */
+#define BALLOON3_BP_CF_NRDY_IRQ         BALLOON3_IRQ(0)
+#define BALLOON3_BP_NSTSCHG_IRQ         BALLOON3_IRQ(1)
+
+/* NAND Control register */
+#define BALLOON3_NAND_CONTROL_FLWP      (1 << 7)
+#define BALLOON3_NAND_CONTROL_FLSE      (1 << 6)
+#define BALLOON3_NAND_CONTROL_FLCE3     (1 << 5)
+#define BALLOON3_NAND_CONTROL_FLCE2     (1 << 4)
+#define BALLOON3_NAND_CONTROL_FLCE1     (1 << 3)
+#define BALLOON3_NAND_CONTROL_FLCE0     (1 << 2)
+#define BALLOON3_NAND_CONTROL_FLALE     (1 << 1)
+#define BALLOON3_NAND_CONTROL_FLCLE     (1 << 0)
+
+/* NAND Status register */
+#define BALLOON3_NAND_STAT_RNB          (1 << 0)
+
+/* NAND Control2 register */
+#define BALLOON3_NAND_CONTROL2_16BIT    (1 << 0)
+
 /* GPIOs for irqs */
 #define BALLOON3_GPIO_AUX_NIRQ          (94)
 #define BALLOON3_GPIO_CODEC_IRQ         (95)
@@ -54,20 +88,24 @@ enum balloon3_features {
 
 #define BALLOON3_GPIO_S0_CD             (105)
 
+/* NAND */
+#define BALLOON3_GPIO_RUN_NAND          (102)
+
+/* PCF8574A Leds */
+#define BALLOON3_PCF_GPIO_BASE          160
+#define BALLOON3_PCF_GPIO_LED0          (BALLOON3_PCF_GPIO_BASE + 0)
+#define BALLOON3_PCF_GPIO_LED1          (BALLOON3_PCF_GPIO_BASE + 1)
+#define BALLOON3_PCF_GPIO_LED2          (BALLOON3_PCF_GPIO_BASE + 2)
+#define BALLOON3_PCF_GPIO_LED3          (BALLOON3_PCF_GPIO_BASE + 3)
+#define BALLOON3_PCF_GPIO_LED4          (BALLOON3_PCF_GPIO_BASE + 4)
+#define BALLOON3_PCF_GPIO_LED5          (BALLOON3_PCF_GPIO_BASE + 5)
+#define BALLOON3_PCF_GPIO_LED6          (BALLOON3_PCF_GPIO_BASE + 6)
+#define BALLOON3_PCF_GPIO_LED7          (BALLOON3_PCF_GPIO_BASE + 7)
+
 /* FPGA Interrupt Mask/Acknowledge Register */
 #define BALLOON3_INT_S0_IRQ             (1 << 0)  /* PCMCIA 0 IRQ */
 #define BALLOON3_INT_S0_STSCHG          (1 << 1)  /* PCMCIA 0 status changed */
 
-/* CF Status Register */
-#define BALLOON3_PCMCIA_nIRQ            (1 << 0)  /* IRQ / ready signal */
-#define BALLOON3_PCMCIA_nSTSCHG_BVD1    (1 << 1)
-                                        /* VDD sense / card status changed */
-
-/* CF control register (write) */
-#define BALLOON3_PCMCIA_RESET           (1 << 0)   /* Card reset signal */
-#define BALLOON3_PCMCIA_ENABLE          (1 << 1)
-#define BALLOON3_PCMCIA_ADD_ENABLE      (1 << 2)
-
 /* CPLD (and FPGA) interface definitions */
 #define CPLD_LCD0_DATA_SET             0x00
 #define CPLD_LCD0_DATA_CLR             0x10
@@ -132,9 +170,6 @@ enum balloon3_features {
 /* Balloon3 Interrupts */
 #define BALLOON3_IRQ(x)         (IRQ_BOARD_START + (x))
 
-#define BALLOON3_BP_CF_NRDY_IRQ BALLOON3_IRQ(0)
-#define BALLOON3_BP_NSTSCHG_IRQ BALLOON3_IRQ(1)
-
 #define BALLOON3_AUX_NIRQ       IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ)
 #define BALLOON3_CODEC_IRQ      IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
 #define BALLOON3_S0_CD_IRQ      IRQ_GPIO(BALLOON3_GPIO_S0_CD)
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 5f2ba8d9015c..58dada11054f 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -5,6 +5,27 @@
 #include <mach/mfp.h>
 
 /*
+ * base board glue for PXA270 module
+ */
+
+enum {
+        COLIBRI_PXA270_EVALBOARD = 0,
+        COLIBRI_PXA270_INCOME,
+};
+
+#if defined(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD)
+extern void colibri_pxa270_evalboard_init(void);
+#else
+static inline void colibri_pxa270_evalboard_init(void) {}
+#endif
+
+#if defined(CONFIG_MACH_COLIBRI_PXA270_INCOME)
+extern void colibri_pxa270_income_boardinit(void);
+#else
+static inline void colibri_pxa270_income_boardinit(void) {}
+#endif
+
+/*
  * common settings for all modules
  */
 
@@ -33,13 +54,10 @@ static inline void colibri_pxa3xx_init_nand(void) {}
 /* physical memory regions */
 #define COLIBRI_SDRAM_BASE      0xa0000000      /* SDRAM region */
 
-/* definitions for Colibri PXA270 */
-
-#define COLIBRI_PXA270_FLASH_PHYS       (PXA_CS0_PHYS)  /* Flash region */
-#define COLIBRI_PXA270_ETH_PHYS         (PXA_CS2_PHYS)  /* Ethernet */
-#define COLIBRI_PXA270_ETH_IRQ_GPIO     114
-#define COLIBRI_PXA270_ETH_IRQ          \
-        gpio_to_irq(mfp_to_gpio(COLIBRI_PXA270_ETH_IRQ_GPIO))
+/* GPIO definitions for Colibri PXA270 */
+#define GPIO114_COLIBRI_PXA270_ETH_IRQ  114
+#define GPIO0_COLIBRI_PXA270_SD_DETECT  0
+#define GPIO113_COLIBRI_PXA270_TS_IRQ   113
 
 #endif /* _COLIBRI_H_ */
 
diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
index 585970ef08ce..0011055bc3f9 100644
--- a/arch/arm/mach-pxa/include/mach/corgi.h
+++ b/arch/arm/mach-pxa/include/mach/corgi.h
@@ -109,10 +109,5 @@
 #define CORGI_GPIO_BACKLIGHT_CONT       (CORGI_SCOOP_GPIO_BASE + 7)
 #define CORGI_GPIO_MIC_BIAS             (CORGI_SCOOP_GPIO_BASE + 8)
 
-/*
- * Shared data structures
- */
-extern struct platform_device corgiscoop_device;
-
 #endif /* __ASM_ARCH_CORGI_H  */
 
diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h
index 06abd4160607..9b898680b206 100644
--- a/arch/arm/mach-pxa/include/mach/gumstix.h
+++ b/arch/arm/mach-pxa/include/mach/gumstix.h
@@ -14,25 +14,15 @@
 
 /*
 GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean
-interrupt signal for determining cable presence. On the original gumstix,
-this is GPIO81, and GPIO83 needs to be defined as well. On the gumstix F,
+interrupt signal for determining cable presence. On the gumstix F,
 this moves to GPIO17 and GPIO37. */
 
 /* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn
 has detected a cable insertion; driven low otherwise. */
 
-#ifdef CONFIG_ARCH_GUMSTIX_ORIG
-
-#define GPIO_GUMSTIX_USB_GPIOn          81
-#define GPIO_GUMSTIX_USB_GPIOx          83
-
-#else
-
 #define GPIO_GUMSTIX_USB_GPIOn          35
 #define GPIO_GUMSTIX_USB_GPIOx          41
 
-#endif
-
 /* usb state change */
 #define GUMSTIX_USB_INTR_IRQ            IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn)
 
diff --git a/arch/arm/mach-pxa/include/mach/palm27x.h b/arch/arm/mach-pxa/include/mach/palm27x.h
new file mode 100644
index 000000000000..0a5e5eadebf5
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palm27x.h
@@ -0,0 +1,81 @@
+/*
+ * Common functions for Palm LD, T5, TX, Z72
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __INCLUDE_MACH_PALM27X__
+#define __INCLUDE_MACH_PALM27X__
+
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+extern void __init palm27x_mmc_init(int detect, int ro, int power,
+                                        int power_inverted);
+#else
+static inline void palm27x_mmc_init(int detect, int ro, int power,
+                                        int power_inverted)
+{}
+#endif
+
+#if defined(CONFIG_SUSPEND)
+extern void __init palm27x_pm_init(unsigned long str_base);
+#else
+static inline void palm27x_pm_init(unsigned long str_base) {}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+extern struct pxafb_mode_info palm_320x480_lcd_mode;
+extern struct pxafb_mode_info palm_320x320_lcd_mode;
+extern struct pxafb_mode_info palm_320x320_new_lcd_mode;
+extern void __init palm27x_lcd_init(int power,
+                                        struct pxafb_mode_info *mode);
+#else
+static inline void palm27x_lcd_init(int power, struct pxafb_mode_info *mode) {}
+#endif
+
+#if     defined(CONFIG_USB_GADGET_PXA27X) || \
+        defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+extern void __init palm27x_udc_init(int vbus, int pullup,
+                                        int vbus_inverted);
+#else
+static inline void palm27x_udc_init(int vbus, int pullup, int vbus_inverted) {}
+#endif
+
+#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
+extern void __init palm27x_irda_init(int pwdn);
+#else
+static inline void palm27x_irda_init(int pwdn) {}
+#endif
+
+#if     defined(CONFIG_TOUCHSCREEN_WM97XX) || \
+        defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE)
+extern void __init palm27x_ac97_init(int minv, int maxv, int jack,
+                                        int reset);
+#else
+static inline void palm27x_ac97_init(int minv, int maxv, int jack, int reset) {}
+#endif
+
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+extern void __init palm27x_pwm_init(int bl, int lcd);
+#else
+static inline void palm27x_pwm_init(int bl, int lcd) {}
+#endif
+
+#if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE)
+extern void __init palm27x_power_init(int ac, int usb);
+#else
+static inline void palm27x_power_init(int ac, int usb) {}
+#endif
+
+#if defined(CONFIG_REGULATOR_MAX1586) || \
+    defined(CONFIG_REGULATOR_MAX1586_MODULE)
+extern void __init palm27x_pmic_init(void);
+#else
+static inline void palm27x_pmic_init(void) {}
+#endif
+
+#endif  /* __INCLUDE_MACH_PALM27X__ */
diff --git a/arch/arm/mach-pxa/include/mach/pata_pxa.h b/arch/arm/mach-pxa/include/mach/pata_pxa.h
new file mode 100644
index 000000000000..6cf7df1d5830
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pata_pxa.h
@@ -0,0 +1,33 @@
+/*
+ * Generic PXA PATA driver
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MACH_PATA_PXA_H__
+#define __MACH_PATA_PXA_H__
+
+struct pata_pxa_pdata {
+        /* PXA DMA DREQ<0:2> pin */
+        uint32_t        dma_dreq;
+        /* Register shift */
+        uint32_t        reg_shift;
+        /* IRQ flags */
+        uint32_t        irq_flags;
+};
+
+#endif  /* __MACH_PATA_PXA_H__ */
diff --git a/arch/arm/mach-pxa/include/mach/sharpsl.h b/arch/arm/mach-pxa/include/mach/sharpsl.h
deleted file mode 100644
index 8242e14a44fa..000000000000
--- a/arch/arm/mach-pxa/include/mach/sharpsl.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * SharpSL SSP Driver
- */
-
-unsigned long corgi_ssp_ads7846_putget(unsigned long);
-unsigned long corgi_ssp_ads7846_get(void);
-void corgi_ssp_ads7846_put(unsigned long data);
-void corgi_ssp_ads7846_lock(void);
-void corgi_ssp_ads7846_unlock(void);
-void corgi_ssp_lcdtg_send (unsigned char adrs, unsigned char data);
-void corgi_ssp_blduty_set(int duty);
-int corgi_ssp_max1111_get(unsigned long data);
-
-/*
- * SharpSL Touchscreen Driver
- */
-
-struct corgits_machinfo {
-        unsigned long (*get_hsync_invperiod)(void);
-        void (*put_hsync)(void);
-        void (*wait_hsync)(void);
-};
-
-
-/*
- * SharpSL Backlight
- */
-extern void corgibl_limit_intensity(int limit);
-extern void corgi_lcd_limit_intensity(int limit);
-
-
-/*
- * SharpSL Battery/PM Driver
- */
-extern void sharpsl_battery_kick(void);
diff --git a/arch/arm/mach-pxa/include/mach/sharpsl_pm.h b/arch/arm/mach-pxa/include/mach/sharpsl_pm.h
index 1920dc6b05dc..905be6755f04 100644
--- a/arch/arm/mach-pxa/include/mach/sharpsl_pm.h
+++ b/arch/arm/mach-pxa/include/mach/sharpsl_pm.h
@@ -93,6 +93,8 @@ struct sharpsl_pm_status {
 
 extern struct sharpsl_pm_status sharpsl_pm;
 
+extern struct battery_thresh sharpsl_battery_levels_acin[];
+extern struct battery_thresh sharpsl_battery_levels_noac[];
 
 #define SHARPSL_LED_ERROR  2
 #define SHARPSL_LED_ON     1
@@ -101,4 +103,11 @@ extern struct sharpsl_pm_status sharpsl_pm;
 void sharpsl_battery_kick(void);
 void sharpsl_pm_led(int val);
 
+/* MAX1111 Channel Definitions */
+#define MAX1111_BATT_VOLT   4u
+#define MAX1111_BATT_TEMP   2u
+#define MAX1111_ACIN_VOLT   6u
+int sharpsl_pm_pxa_read_max1111(int channel);
+
+void corgi_lcd_limit_intensity(int limit);
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h
index fa1998caa78e..685749a51c42 100644
--- a/arch/arm/mach-pxa/include/mach/spitz.h
+++ b/arch/arm/mach-pxa/include/mach/spitz.h
@@ -185,7 +185,5 @@
 /*
  * Shared data structures
  */
-extern struct platform_device spitzscoop_device;
-extern struct platform_device spitzscoop2_device;
 extern struct platform_device spitzssp_device;
 extern struct sharpsl_charger_machinfo spitz_pm_machinfo;