[ARM] eseries: move LCD defs into machine files

This patch removes the seperate files used for the LCD definitions on
e-series and places the definitions into the machine specific files.

Signed-off-by: Ian Molton <spyro@f2s.com>

1 files changed, 32 insertions, 0 deletions

diff --git a/arch/arm/mach-pxa/e400.c b/arch/arm/mach-pxa/e400.c
index 405e6dcfc3ce..0bcf9ece3d33 100644
--- a/arch/arm/mach-pxa/e400.c
+++ b/arch/arm/mach-pxa/e400.c
@@ -17,12 +17,41 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
+#include <mach/pxa-regs.h>
 #include <mach/mfp-pxa25x.h>
 #include <mach/hardware.h>
 
+#include <mach/pxafb.h>
+
 #include "generic.h"
 #include "eseries.h"
 
+/* ------------------------ E400 LCD definitions ------------------------ */
+
+static struct pxafb_mode_info e400_pxafb_mode_info = {
+        .pixclock       = 140703,
+        .xres           = 240,
+        .yres           = 320,
+        .bpp            = 16,
+        .hsync_len      = 4,
+        .left_margin    = 28,
+        .right_margin   = 8,
+        .vsync_len      = 3,
+        .upper_margin   = 5,
+        .lower_margin   = 6,
+        .sync           = 0,
+};
+
+static struct pxafb_mach_info e400_pxafb_mach_info = {
+        .modes          = &e400_pxafb_mode_info,
+        .num_modes      = 1,
+        .lccr0          = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+        .lccr3          = 0,
+        .pxafb_backlight_power  = NULL,
+};
+
+/* ------------------------ E400 MFP config ----------------------------- */
+
 static unsigned long e400_pin_config[] __initdata = {
         /* Chip selects */
         GPIO15_nCS_1,   /* CS1 - Flash */
@@ -41,9 +70,12 @@ static unsigned long e400_pin_config[] __initdata = {
         GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
 };
 
+/* ---------------------------------------------------------------------- */
+
 static void __init e400_init(void)
 {
         pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
+        set_pxa_fb_info(&e400_pxafb_mach_info);
 }
 
 MACHINE_START(E400, "Toshiba e400")