Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (278 commits)
  arm: remove machine_desc.io_pg_offst and .phys_io
  arm: use addruart macro to establish debug mappings
  arm: return both physical and virtual addresses from addruart
  arm/debug: consolidate addruart macros for CONFIG_DEBUG_ICEDCC
  ARM: make struct machine_desc definition coherent with its comment
  eukrea_mbimxsd-baseboard: Pass the correct GPIO to gpio_free
  cpuimx27: fix compile when ULPI is selected
  mach-pcm037_eet: fix compile errors
  Fixing ethernet driver compilation error for i.MX31 ADS board
  cpuimx51: update board support
  mx5: add cpuimx51sd module and its baseboard
  iomux-mx51: fix GPIO_1_xx 's IOMUX configuration
  imx-esdhc: update devices registration
  mx51: add resources for SD/MMC on i.MX51
  iomux-mx51: fix SD1 and SD2's iomux configuration
  clock-mx51: rename CLOCK1 to CLOCK_CCGR for better readability
  clock-mx51: factorize clk_set_parent and clk_get_rate
  eukrea_mbimxsd: add support for DVI displays
  cpuimx25 & cpuimx35: fix OTG port registration in host mode
  i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472
  ...

1 files changed, 77 insertions, 2 deletions

diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index c70e6c2f4e7c..922b1075b9de 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
+#include <linux/clk.h>
 
 #include <linux/gpio.h>
 #include <linux/dm9000.h>
@@ -50,6 +51,7 @@
 #include <plat/i2c.h>
 #include <plat/pxa3xx_nand.h>
 #include <mach/audio.h>
+#include <mach/pxa3xx-u2d.h>
 
 #include <asm/mach/map.h>
 
@@ -68,6 +70,8 @@
 #define GPIO97_RTC_RD           (97)
 #define GPIO98_RTC_IO           (98)
 
+#define GPIO_ULPI_PHY_RST       (127)
+
 static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = {
         /* LCD */
         GPIO54_LCD_LDD_0,
@@ -472,6 +476,78 @@ static void __init cm_x300_init_mmc(void)
 static inline void cm_x300_init_mmc(void) {}
 #endif
 
+#if defined(CONFIG_PXA310_ULPI)
+static struct clk *pout_clk;
+
+static int cm_x300_ulpi_phy_reset(void)
+{
+        int err;
+
+        /* reset the PHY */
+        err = gpio_request(GPIO_ULPI_PHY_RST, "ulpi reset");
+        if (err) {
+                pr_err("%s: failed to request ULPI reset GPIO: %d\n",
+                       __func__, err);
+                return err;
+        }
+
+        gpio_direction_output(GPIO_ULPI_PHY_RST, 0);
+        msleep(10);
+        gpio_set_value(GPIO_ULPI_PHY_RST, 1);
+        msleep(10);
+
+        gpio_free(GPIO_ULPI_PHY_RST);
+
+        return 0;
+}
+
+static inline int cm_x300_u2d_init(struct device *dev)
+{
+        int err = 0;
+
+        if (cpu_is_pxa310()) {
+                /* CLK_POUT is connected to the ULPI PHY */
+                pout_clk = clk_get(NULL, "CLK_POUT");
+                if (IS_ERR(pout_clk)) {
+                        err = PTR_ERR(pout_clk);
+                        pr_err("%s: failed to get CLK_POUT: %d\n",
+                               __func__, err);
+                        return err;
+                }
+                clk_enable(pout_clk);
+
+                err = cm_x300_ulpi_phy_reset();
+                if (err) {
+                        clk_disable(pout_clk);
+                        clk_put(pout_clk);
+                }
+        }
+
+        return err;
+}
+
+static void cm_x300_u2d_exit(struct device *dev)
+{
+        if (cpu_is_pxa310()) {
+                clk_disable(pout_clk);
+                clk_put(pout_clk);
+        }
+}
+
+static struct pxa3xx_u2d_platform_data cm_x300_u2d_platform_data = {
+        .ulpi_mode      = ULPI_SER_6PIN,
+        .init           = cm_x300_u2d_init,
+        .exit           = cm_x300_u2d_exit,
+};
+
+static void cm_x300_init_u2d(void)
+{
+        pxa3xx_set_u2d_info(&cm_x300_u2d_platform_data);
+}
+#else
+static inline void cm_x300_init_u2d(void) {}
+#endif
+
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static int cm_x300_ohci_init(struct device *dev)
 {
@@ -754,6 +830,7 @@ static void __init cm_x300_init(void)
         cm_x300_init_da9030();
         cm_x300_init_dm9000();
         cm_x300_init_lcd();
+        cm_x300_init_u2d();
         cm_x300_init_ohci();
         cm_x300_init_mmc();
         cm_x300_init_nand();
@@ -779,9 +856,7 @@ static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags,
 }
 
 MACHINE_START(CM_X300, "CM-X300 module")
-        .phys_io        = 0x40000000,
         .boot_params    = 0xa0000100,
-        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
         .map_io         = pxa_map_io,
         .init_irq       = pxa3xx_init_irq,
         .timer          = &pxa_timer,