[ARM] 5282/1: pxa: add CM-X255 support

Signed-off-by: Russ Dill <russ.dill@gmail.com>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 142 insertions, 0 deletions

diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c
new file mode 100644
index 000000000000..15c5b9dc6383
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x255.c
@@ -0,0 +1,142 @@
+/*
+ * linux/arch/arm/mach-pxa/cm-x255.c
+ *
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <linux/spi/spi.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/bitfield.h>
+
+#include "generic.h"
+
+static unsigned long cmx255_pin_config[] = {
+        /* AC'97 */
+        GPIO28_AC97_BITCLK,
+        GPIO29_AC97_SDATA_IN_0,
+        GPIO30_AC97_SDATA_OUT,
+        GPIO31_AC97_SYNC,
+
+        /* BTUART */
+        GPIO42_BTUART_RXD,
+        GPIO43_BTUART_TXD,
+        GPIO44_BTUART_CTS,
+        GPIO45_BTUART_RTS,
+
+        /* STUART */
+        GPIO46_STUART_RXD,
+        GPIO47_STUART_TXD,
+
+        /* LCD */
+        GPIO58_LCD_LDD_0,
+        GPIO59_LCD_LDD_1,
+        GPIO60_LCD_LDD_2,
+        GPIO61_LCD_LDD_3,
+        GPIO62_LCD_LDD_4,
+        GPIO63_LCD_LDD_5,
+        GPIO64_LCD_LDD_6,
+        GPIO65_LCD_LDD_7,
+        GPIO66_LCD_LDD_8,
+        GPIO67_LCD_LDD_9,
+        GPIO68_LCD_LDD_10,
+        GPIO69_LCD_LDD_11,
+        GPIO70_LCD_LDD_12,
+        GPIO71_LCD_LDD_13,
+        GPIO72_LCD_LDD_14,
+        GPIO73_LCD_LDD_15,
+        GPIO74_LCD_FCLK,
+        GPIO75_LCD_LCLK,
+        GPIO76_LCD_PCLK,
+        GPIO77_LCD_BIAS,
+
+        /* SSP1 */
+        GPIO23_SSP1_SCLK,
+        GPIO24_SSP1_SFRM,
+        GPIO25_SSP1_TXD,
+        GPIO26_SSP1_RXD,
+
+        /* SSP2 */
+        GPIO81_SSP2_CLK_OUT,
+        GPIO82_SSP2_FRM_OUT,
+        GPIO83_SSP2_TXD,
+        GPIO84_SSP2_RXD,
+
+        /* PC Card */
+        GPIO48_nPOE,
+        GPIO49_nPWE,
+        GPIO50_nPIOR,
+        GPIO51_nPIOW,
+        GPIO52_nPCE_1,
+        GPIO53_nPCE_2,
+        GPIO54_nPSKTSEL,
+        GPIO55_nPREG,
+        GPIO56_nPWAIT,
+        GPIO57_nIOIS16,
+
+        /* SDRAM and local bus */
+        GPIO15_nCS_1,
+        GPIO78_nCS_2,
+        GPIO79_nCS_3,
+        GPIO80_nCS_4,
+        GPIO33_nCS_5,
+        GPIO18_RDY,
+
+        /* GPIO */
+        GPIO0_GPIO      | WAKEUP_ON_EDGE_BOTH,
+        GPIO9_GPIO,                             /* PC card reset */
+
+        /* NAND controls */
+        GPIO5_GPIO      | MFP_LPM_DRIVE_HIGH,   /* NAND CE# */
+        GPIO4_GPIO      | MFP_LPM_DRIVE_LOW,    /* NAND ALE */
+        GPIO3_GPIO      | MFP_LPM_DRIVE_LOW,    /* NAND CLE */
+        GPIO10_GPIO,                            /* NAND Ready/Busy */
+
+        /* interrupts */
+        GPIO22_GPIO,    /* DM9000 interrupt */
+};
+
+#if defined(CONFIG_SPI_PXA2XX)
+static struct pxa2xx_spi_master pxa_ssp_master_info = {
+        .num_chipselect = 1,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+        [0] = {
+                .modalias       = "rtc-max6902",
+                .max_speed_hz   = 1000000,
+                .bus_num        = 1,
+                .chip_select    = 0,
+        },
+};
+
+static void __init cmx255_init_rtc(void)
+{
+        pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
+        spi_register_board_info(ARRAY_AND_SIZE(spi_board_info));
+}
+#else
+static inline void cmx255_init_rtc(void) {}
+#endif
+
+void __init cmx255_init(void)
+{
+        pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx255_pin_config));
+
+        cmx255_init_rtc();
+}