[ARM] OrionNAS RD board support

serial, NOR, PCI and Ethernet is activated at the moment.

Signed-off-by: Ronen Shitrit <rshitrit@marvell.com>
Reviewed-by: Tzachi Perelstein <tzachi@marvell.com>
Reviewed-by: Nicolas Pitre <nico@marvell.com>
Reviewed-by: Lennert Buytenhek <buytenh@marvell.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>

3 files changed, 314 insertions, 0 deletions

diff --git a/arch/arm/mach-orion/Kconfig b/arch/arm/mach-orion/Kconfig
index 5c1dee8724c1..73d9f9aa283f 100644
--- a/arch/arm/mach-orion/Kconfig
+++ b/arch/arm/mach-orion/Kconfig
@@ -9,6 +9,13 @@ config MACH_DB88F5281
           Say 'Y' here if you want your kernel to support the
           Marvell Orion-2 (88F5281) Development Board
 
+config MACH_RD88F5182
+        bool "Marvell Orion-NAS Reference Design"
+        select I2C_BOARDINFO
+        help
+          Say 'Y' here if you want your kernel to support the
+          Marvell Orion-NAS (88F5182) RD2
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-orion/Makefile b/arch/arm/mach-orion/Makefile
index 55c59bb7f1d9..1cbdd7513120 100644
--- a/arch/arm/mach-orion/Makefile
+++ b/arch/arm/mach-orion/Makefile
@@ -1,2 +1,3 @@
 obj-y                           += common.o addr-map.o pci.o gpio.o irq.o time.o
 obj-$(CONFIG_MACH_DB88F5281)    += db88f5281-setup.o
+obj-$(CONFIG_MACH_RD88F5182)    += rd88f5182-setup.o
diff --git a/arch/arm/mach-orion/rd88f5182-setup.c b/arch/arm/mach-orion/rd88f5182-setup.c
new file mode 100644
index 000000000000..026d74325d01
--- /dev/null
+++ b/arch/arm/mach-orion/rd88f5182-setup.c
@@ -0,0 +1,306 @@
+/*
+ * arch/arm/mach-orion/rd88f5182-setup.c
+ *
+ * Marvell Orion-NAS Reference Design Setup
+ *
+ * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/leds.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/orion.h>
+#include <asm/arch/platform.h>
+#include "common.h"
+
+/*****************************************************************************
+ * RD-88F5182 Info
+ ****************************************************************************/
+
+/*
+ * 512K NOR flash Device bus boot chip select
+ */
+
+#define RD88F5182_NOR_BOOT_BASE         0xf4000000
+#define RD88F5182_NOR_BOOT_SIZE         SZ_512K
+
+/*
+ * 16M NOR flash on Device bus chip select 1
+ */
+
+#define RD88F5182_NOR_BASE              0xfc000000
+#define RD88F5182_NOR_SIZE              SZ_16M
+
+/*
+ * PCI
+ */
+
+#define RD88F5182_PCI_SLOT0_OFFS        7
+#define RD88F5182_PCI_SLOT0_IRQ_A_PIN   7
+#define RD88F5182_PCI_SLOT0_IRQ_B_PIN   6
+
+/*
+ * GPIO Debug LED
+ */
+
+#define RD88F5182_GPIO_DBG_LED          0
+
+/*****************************************************************************
+ * 16M NOR Flash on Device bus CS1
+ ****************************************************************************/
+
+static struct physmap_flash_data rd88f5182_nor_flash_data = {
+        .width          = 1,
+};
+
+static struct resource rd88f5182_nor_flash_resource = {
+        .flags                  = IORESOURCE_MEM,
+        .start                  = RD88F5182_NOR_BASE,
+        .end                    = RD88F5182_NOR_BASE + RD88F5182_NOR_SIZE - 1,
+};
+
+static struct platform_device rd88f5182_nor_flash = {
+        .name                   = "physmap-flash",
+        .id                     = 0,
+        .dev            = {
+                .platform_data  = &rd88f5182_nor_flash_data,
+        },
+        .num_resources          = 1,
+        .resource               = &rd88f5182_nor_flash_resource,
+};
+
+#ifdef CONFIG_LEDS
+
+/*****************************************************************************
+ * Use GPIO debug led as CPU active indication
+ ****************************************************************************/
+
+static void rd88f5182_dbgled_event(led_event_t evt)
+{
+        int val;
+
+        if (evt == led_idle_end)
+                val = 1;
+        else if (evt == led_idle_start)
+                val = 0;
+        else
+                return;
+
+        gpio_set_value(RD88F5182_GPIO_DBG_LED, val);
+}
+
+static int __init rd88f5182_dbgled_init(void)
+{
+        int pin;
+
+        if (machine_is_rd88f5182()) {
+                pin = RD88F5182_GPIO_DBG_LED;
+
+                if (gpio_request(pin, "DBGLED") == 0) {
+                        if (gpio_direction_output(pin, 0) != 0) {
+                                printk(KERN_ERR "rd88f5182_dbgled_init failed "
+                                                "to set output pin %d\n", pin);
+                                gpio_free(pin);
+                                return 0;
+                        }
+                } else {
+                        printk(KERN_ERR "rd88f5182_dbgled_init failed "
+                                        "to request gpio %d\n", pin);
+                        return 0;
+                }
+
+                leds_event = rd88f5182_dbgled_event;
+        }
+        return 0;
+}
+
+__initcall(rd88f5182_dbgled_init);
+
+#endif
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+
+void __init rd88f5182_pci_preinit(void)
+{
+        int pin;
+
+        /*
+         * Configure PCI GPIO IRQ pins
+         */
+        pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN;
+        if (gpio_request(pin, "PCI IntA") == 0) {
+                if (gpio_direction_input(pin) == 0) {
+                        set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+                } else {
+                        printk(KERN_ERR "rd88f5182_pci_preinit faield to "
+                                        "set_irq_type pin %d\n", pin);
+                        gpio_free(pin);
+                }
+        } else {
+                printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin);
+        }
+
+        pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN;
+        if (gpio_request(pin, "PCI IntB") == 0) {
+                if (gpio_direction_input(pin) == 0) {
+                        set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+                } else {
+                        printk(KERN_ERR "rd88f5182_pci_preinit faield to "
+                                        "set_irq_type pin %d\n", pin);
+                        gpio_free(pin);
+                }
+        } else {
+                printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin);
+        }
+}
+
+static int __init rd88f5182_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+        /*
+         * PCI-E isn't used on the RD2
+         */
+        if (dev->bus->number == orion_pcie_local_bus_nr())
+                return IRQ_ORION_PCIE0_INT;
+
+        /*
+         * PCI IRQs are connected via GPIOs
+         */
+        switch (slot - RD88F5182_PCI_SLOT0_OFFS) {
+        case 0:
+                if (pin == 1)
+                        return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN);
+                else
+                        return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN);
+        default:
+                return -1;
+        }
+}
+
+static struct hw_pci rd88f5182_pci __initdata = {
+        .nr_controllers = 2,
+        .preinit        = rd88f5182_pci_preinit,
+        .swizzle        = pci_std_swizzle,
+        .setup          = orion_pci_sys_setup,
+        .scan           = orion_pci_sys_scan_bus,
+        .map_irq        = rd88f5182_pci_map_irq,
+};
+
+static int __init rd88f5182_pci_init(void)
+{
+        if (machine_is_rd88f5182())
+                pci_common_init(&rd88f5182_pci);
+
+        return 0;
+}
+
+subsys_initcall(rd88f5182_pci_init);
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data rd88f5182_eth_data = {
+        .phy_addr       = 8,
+        .force_phy_addr = 1,
+};
+
+/*****************************************************************************
+ * RTC DS1338 on I2C bus
+ ****************************************************************************/
+static struct i2c_board_info __initdata rd88f5182_i2c_rtc = {
+        .driver_name    = "rtc-ds1307",
+        .type           = "ds1338",
+        .addr           = 0x68,
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static struct platform_device *rd88f5182_devices[] __initdata = {
+        &rd88f5182_nor_flash,
+};
+
+static void __init rd88f5182_init(void)
+{
+        /*
+         * Setup basic Orion functions. Need to be called early.
+         */
+        orion_init();
+
+        /*
+         * Setup the CPU address decode windows for our devices
+         */
+        orion_setup_cpu_win(ORION_DEV_BOOT, RD88F5182_NOR_BOOT_BASE,
+                                RD88F5182_NOR_BOOT_SIZE, -1);
+        orion_setup_cpu_win(ORION_DEV1, RD88F5182_NOR_BASE,
+                                RD88F5182_NOR_SIZE, -1);
+
+        /*
+         * Open a special address decode windows for the PCIE WA.
+         */
+        orion_write(ORION_REGS_BASE | 0x20074, ORION_PCIE_WA_BASE);
+        orion_write(ORION_REGS_BASE | 0x20070, (0x7941 |
+                (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16));
+
+        /*
+         * Setup Multiplexing Pins --
+         * MPP[0] Debug Led (GPIO - Out)
+         * MPP[1] Debug Led (GPIO - Out)
+         * MPP[2] N/A
+         * MPP[3] RTC_Int (GPIO - In)
+         * MPP[4] GPIO
+         * MPP[5] GPIO
+         * MPP[6] PCI_intA (GPIO - In)
+         * MPP[7] PCI_intB (GPIO - In)
+         * MPP[8-11] N/A
+         * MPP[12] SATA 0 presence Indication
+         * MPP[13] SATA 1 presence Indication
+         * MPP[14] SATA 0 active Indication
+         * MPP[15] SATA 1 active indication
+         * MPP[16-19] Not used
+         * MPP[20] PCI Clock to MV88F5182
+         * MPP[21] PCI Clock to mini PCI CON11
+         * MPP[22] USB 0 over current indication
+         * MPP[23] USB 1 over current indication
+         * MPP[24] USB 1 over current enable
+         * MPP[25] USB 0 over current enable
+         */
+
+        orion_write(MPP_0_7_CTRL, 0x00000003);
+        orion_write(MPP_8_15_CTRL, 0x55550000);
+        orion_write(MPP_16_19_CTRL, 0x5555);
+
+        orion_gpio_set_valid_pins(0x000000fb);
+
+        platform_add_devices(rd88f5182_devices, ARRAY_SIZE(rd88f5182_devices));
+        i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
+        orion_eth_init(&rd88f5182_eth_data);
+}
+
+MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
+        /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
+        .phys_io        = ORION_REGS_BASE,
+        .io_pg_offst    = ((ORION_REGS_BASE) >> 18) & 0xFFFC,
+        .boot_params    = 0x00000100,
+        .init_machine   = rd88f5182_init,
+        .map_io         = orion_map_io,
+        .init_irq       = orion_init_irq,
+        .timer          = &orion_timer,
+MACHINE_END