Merge branch 'for-rmk' of git://git.marvell.com/orion

Merge branch 'orion-devel' into devel

12 files changed, 1135 insertions, 11 deletions

diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index ddcd41b15d17..f59a8d0e0824 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -36,6 +36,12 @@ config MACH_TS209
           Say 'Y' here if you want your kernel to support the
           QNAP TS-109/TS-209 platform.
 
+config MACH_TERASTATION_PRO2
+        bool "Buffalo Terastation Pro II/Live"
+        help
+          Say 'Y' here if you want your kernel to support the
+          Buffalo Terastation Pro II/Live platform.
+
 config MACH_LINKSTATION_PRO
         bool "Buffalo Linkstation Pro/Live"
         select I2C_BOARDINFO
@@ -44,6 +50,13 @@ config MACH_LINKSTATION_PRO
           Buffalo Linkstation Pro/Live platform. Both v1 and
           v2 devices are supported.
 
+config MACH_LINKSTATION_MINI
+        bool "Buffalo Linkstation Mini"
+        select I2C_BOARDINFO
+        help
+          Say 'Y' here if you want your kernel to support the
+          Buffalo Linkstation Mini platform.
+
 config MACH_TS409
         bool "QNAP TS-409"
         help
@@ -68,6 +81,13 @@ config MACH_MV2120
           Say 'Y' here if you want your kernel to support the
           HP Media Vault mv2120 or mv5100.
 
+config MACH_EDMINI_V2
+        bool "LaCie Ethernet Disk mini V2"
+        select I2C_BOARDINFO
+        help
+          Say 'Y' here if you want your kernel to support the
+          LaCie Ethernet Disk mini V2.
+
 config MACH_MSS2
         bool "Maxtor Shared Storage II"
         help
@@ -92,6 +112,12 @@ config MACH_RD88F5181L_FXO
           Say 'Y' here if you want your kernel to support the
           Marvell Orion-VoIP FXO (88F5181L) RD.
 
+config MACH_RD88F6183AP_GE
+        bool "Marvell Orion-1-90 AP GE Reference Design"
+        help
+          Say 'Y' here if you want your kernel to support the
+          Marvell Orion-1-90 (88F6183) AP GE RD.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index fcc48a8864f3..3d4a1bc12355 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -2,14 +2,18 @@ obj-y				+= common.o addr-map.o pci.o gpio.o irq.o mpp.o
 obj-$(CONFIG_MACH_DB88F5281)    += db88f5281-setup.o
 obj-$(CONFIG_MACH_RD88F5182)    += rd88f5182-setup.o
 obj-$(CONFIG_MACH_KUROBOX_PRO)  += kurobox_pro-setup.o
+obj-$(CONFIG_MACH_TERASTATION_PRO2)     += terastation_pro2-setup.o
 obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
+obj-$(CONFIG_MACH_LINKSTATION_MINI) += lsmini-setup.o
 obj-$(CONFIG_MACH_DNS323)       += dns323-setup.o
 obj-$(CONFIG_MACH_TS209)        += ts209-setup.o tsx09-common.o
 obj-$(CONFIG_MACH_TS409)        += ts409-setup.o tsx09-common.o
 obj-$(CONFIG_MACH_WRT350N_V2)   += wrt350n-v2-setup.o
 obj-$(CONFIG_MACH_TS78XX)       += ts78xx-setup.o
 obj-$(CONFIG_MACH_MV2120)       += mv2120-setup.o
+obj-$(CONFIG_MACH_EDMINI_V2)    += edmini_v2-setup.o
 obj-$(CONFIG_MACH_MSS2)         += mss2-setup.o
 obj-$(CONFIG_MACH_WNR854T)      += wnr854t-setup.o
 obj-$(CONFIG_MACH_RD88F5181L_GE)        += rd88f5181l-ge-setup.o
 obj-$(CONFIG_MACH_RD88F5181L_FXO)       += rd88f5181l-fxo-setup.o
+obj-$(CONFIG_MACH_RD88F6183AP_GE)       += rd88f6183ap-ge-setup.o
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 7b11e552bc5a..9625ef5975d0 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -18,6 +18,7 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/mv643xx_i2c.h>
 #include <linux/ata_platform.h>
+#include <linux/spi/orion_spi.h>
 #include <asm/page.h>
 #include <asm/setup.h>
 #include <asm/timex.h>
@@ -146,7 +147,6 @@ void __init orion5x_ehci1_init(void)
  ****************************************************************************/
 struct mv643xx_eth_shared_platform_data orion5x_eth_shared_data = {
         .dram           = &orion5x_mbus_dram_info,
-        .t_clk          = ORION5X_TCLK,
 };
 
 static struct resource orion5x_eth_shared_resources[] = {
@@ -154,6 +154,10 @@ static struct resource orion5x_eth_shared_resources[] = {
                 .start  = ORION5X_ETH_PHYS_BASE + 0x2000,
                 .end    = ORION5X_ETH_PHYS_BASE + 0x3fff,
                 .flags  = IORESOURCE_MEM,
+        }, {
+                .start  = IRQ_ORION5X_ETH_ERR,
+                .end    = IRQ_ORION5X_ETH_ERR,
+                .flags  = IORESOURCE_IRQ,
         },
 };
 
@@ -163,7 +167,7 @@ static struct platform_device orion5x_eth_shared = {
         .dev            = {
                 .platform_data  = &orion5x_eth_shared_data,
         },
-        .num_resources  = 1,
+        .num_resources  = ARRAY_SIZE(orion5x_eth_shared_resources),
         .resource       = orion5x_eth_shared_resources,
 };
 
@@ -268,6 +272,38 @@ void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data)
 
 
 /*****************************************************************************
+ * SPI
+ ****************************************************************************/
+static struct orion_spi_info orion5x_spi_plat_data = {
+        .tclk           = 0,
+};
+
+static struct resource orion5x_spi_resources[] = {
+        {
+                .name   = "spi base",
+                .start  = SPI_PHYS_BASE,
+                .end    = SPI_PHYS_BASE + 0x1f,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+static struct platform_device orion5x_spi = {
+        .name           = "orion_spi",
+        .id             = 0,
+        .dev            = {
+                .platform_data  = &orion5x_spi_plat_data,
+        },
+        .num_resources  = ARRAY_SIZE(orion5x_spi_resources),
+        .resource       = orion5x_spi_resources,
+};
+
+void __init orion5x_spi_init()
+{
+        platform_device_register(&orion5x_spi);
+}
+
+
+/*****************************************************************************
  * UART0
  ****************************************************************************/
 static struct plat_serial8250_port orion5x_uart0_data[] = {
@@ -278,7 +314,7 @@ static struct plat_serial8250_port orion5x_uart0_data[] = {
                 .flags          = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
                 .iotype         = UPIO_MEM,
                 .regshift       = 2,
-                .uartclk        = ORION5X_TCLK,
+                .uartclk        = 0,
         }, {
         },
 };
@@ -322,7 +358,7 @@ static struct plat_serial8250_port orion5x_uart1_data[] = {
                 .flags          = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
                 .iotype         = UPIO_MEM,
                 .regshift       = 2,
-                .uartclk        = ORION5X_TCLK,
+                .uartclk        = 0,
         }, {
         },
 };
@@ -455,9 +491,24 @@ void __init orion5x_xor_init(void)
 /*****************************************************************************
  * Time handling
  ****************************************************************************/
+int orion5x_tclk;
+
+int __init orion5x_find_tclk(void)
+{
+        u32 dev, rev;
+
+        orion5x_pcie_id(&dev, &rev);
+        if (dev == MV88F6183_DEV_ID &&
+            (readl(MPP_RESET_SAMPLE) & 0x00000200) == 0)
+                return 133333333;
+
+        return 166666667;
+}
+
 static void orion5x_timer_init(void)
 {
-        orion_time_init(IRQ_ORION5X_BRIDGE, ORION5X_TCLK);
+        orion5x_tclk = orion5x_find_tclk();
+        orion_time_init(IRQ_ORION5X_BRIDGE, orion5x_tclk);
 }
 
 struct sys_timer orion5x_timer = {
@@ -499,6 +550,12 @@ static void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name)
                 } else {
                         *dev_name = "MV88F5181(L)-Rev-Unsupported";
                 }
+        } else if (*dev == MV88F6183_DEV_ID) {
+                if (*rev == MV88F6183_REV_B0) {
+                        *dev_name = "MV88F6183-Rev-B0";
+                } else {
+                        *dev_name = "MV88F6183-Rev-Unsupported";
+                }
         } else {
                 *dev_name = "Device-Unknown";
         }
@@ -510,7 +567,12 @@ void __init orion5x_init(void)
         u32 dev, rev;
 
         orion5x_id(&dev, &rev, &dev_name);
-        printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, ORION5X_TCLK);
+        printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, orion5x_tclk);
+
+        orion5x_eth_shared_data.t_clk = orion5x_tclk;
+        orion5x_spi_plat_data.tclk = orion5x_tclk;
+        orion5x_uart0_data[0].uartclk = orion5x_tclk;
+        orion5x_uart1_data[0].uartclk = orion5x_tclk;
 
         /*
          * Setup Orion address map
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index 0bd195551a27..1f8b2da676a5 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -10,6 +10,7 @@ struct mv_sata_platform_data;
 void orion5x_map_io(void);
 void orion5x_init_irq(void);
 void orion5x_init(void);
+extern int orion5x_tclk;
 extern struct sys_timer orion5x_timer;
 
 /*
@@ -30,6 +31,7 @@ void orion5x_ehci1_init(void);
 void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
 void orion5x_i2c_init(void);
 void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
+void orion5x_spi_init(void);
 void orion5x_uart0_init(void);
 void orion5x_uart1_init(void);
 void orion5x_xor_init(void);
diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c
new file mode 100644
index 000000000000..b24ee0c2cd61
--- /dev/null
+++ b/arch/arm/mach-orion5x/edmini_v2-setup.c
@@ -0,0 +1,262 @@
+/*
+ * arch/arm/mach-orion5x/edmini_v2-setup.c
+ *
+ * LaCie Ethernet Disk mini V2 Setup
+ *
+ * Copyright (C) 2008 Christopher Moore <moore@free.fr>
+ * Copyright (C) 2008 Albert Aribaud <albert.aribaud@free.fr>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/*
+ * TODO: add Orion USB device port init when kernel.org support is added.
+ * TODO: add flash write support: see below.
+ * TODO: add power-off support.
+ * TODO: add I2C EEPROM support.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * EDMINI_V2 Info
+ ****************************************************************************/
+
+/*
+ * 512KB NOR flash Device bus boot chip select
+ */
+
+#define EDMINI_V2_NOR_BOOT_BASE         0xfff80000
+#define EDMINI_V2_NOR_BOOT_SIZE         SZ_512K
+
+/*****************************************************************************
+ * 512KB NOR Flash on BOOT Device
+ ****************************************************************************/
+
+/*
+ * Currently the MTD code does not recognize the MX29LV400CBCT as a bottom
+ * -type device. This could cause risks of accidentally erasing critical
+ * flash sectors. We thus define a single, write-protected partition covering
+ * the whole flash.
+ * TODO: once the flash part TOP/BOTTOM detection issue is sorted out in the MTD
+ * code, break this into at least three partitions: 'u-boot code', 'u-boot
+ * environment' and 'whatever is left'.
+ */
+
+static struct mtd_partition edmini_v2_partitions[] = {
+        {
+                .name           = "Full512kb",
+                .size           = 0x00080000,
+                .offset         = 0x00000000,
+                .mask_flags     = MTD_WRITEABLE,
+        },
+};
+
+static struct physmap_flash_data edmini_v2_nor_flash_data = {
+        .width          = 1,
+        .parts          = edmini_v2_partitions,
+        .nr_parts       = ARRAY_SIZE(edmini_v2_partitions),
+};
+
+static struct resource edmini_v2_nor_flash_resource = {
+        .flags                  = IORESOURCE_MEM,
+        .start                  = EDMINI_V2_NOR_BOOT_BASE,
+        .end                    = EDMINI_V2_NOR_BOOT_BASE
+                + EDMINI_V2_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device edmini_v2_nor_flash = {
+        .name                   = "physmap-flash",
+        .id                     = 0,
+        .dev            = {
+                .platform_data  = &edmini_v2_nor_flash_data,
+        },
+        .num_resources          = 1,
+        .resource               = &edmini_v2_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data edmini_v2_eth_data = {
+        .phy_addr       = 8,
+};
+
+/*****************************************************************************
+ * RTC 5C372a on I2C bus
+ ****************************************************************************/
+
+#define EDMINIV2_RTC_GPIO       3
+
+static struct i2c_board_info __initdata edmini_v2_i2c_rtc = {
+        I2C_BOARD_INFO("rs5c372a", 0x32),
+        .irq = 0,
+};
+
+/*****************************************************************************
+ * Sata
+ ****************************************************************************/
+
+static struct mv_sata_platform_data edmini_v2_sata_data = {
+        .n_ports        = 2,
+};
+
+/*****************************************************************************
+ * GPIO LED (simple - doesn't use hardware blinking support)
+ ****************************************************************************/
+
+#define EDMINI_V2_GPIO_LED_POWER        16
+
+static struct gpio_led edmini_v2_leds[] = {
+        {
+                .name = "power:blue",
+                .gpio = EDMINI_V2_GPIO_LED_POWER,
+                .active_low = 1,
+        },
+};
+
+static struct gpio_led_platform_data edmini_v2_led_data = {
+        .num_leds = ARRAY_SIZE(edmini_v2_leds),
+        .leds = edmini_v2_leds,
+};
+
+static struct platform_device edmini_v2_gpio_leds = {
+        .name           = "leds-gpio",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &edmini_v2_led_data,
+        },
+};
+
+/****************************************************************************
+ * GPIO key
+ ****************************************************************************/
+
+#define EDMINI_V2_GPIO_KEY_POWER        18
+
+static struct gpio_keys_button edmini_v2_buttons[] = {
+        {
+                .code           = KEY_POWER,
+                .gpio           = EDMINI_V2_GPIO_KEY_POWER,
+                .desc           = "Power Button",
+                .active_low     = 0,
+        },
+};
+
+static struct gpio_keys_platform_data edmini_v2_button_data = {
+        .buttons        = edmini_v2_buttons,
+        .nbuttons       = ARRAY_SIZE(edmini_v2_buttons),
+};
+
+static struct platform_device edmini_v2_gpio_buttons = {
+        .name           = "gpio-keys",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &edmini_v2_button_data,
+        },
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static struct orion5x_mpp_mode edminiv2_mpp_modes[] __initdata = {
+        {  0, MPP_UNUSED },
+        {  1, MPP_UNUSED },
+        {  2, MPP_UNUSED },
+        {  3, MPP_GPIO },       /* RTC interrupt */
+        {  4, MPP_UNUSED },
+        {  5, MPP_UNUSED },
+        {  6, MPP_UNUSED },
+        {  7, MPP_UNUSED },
+        {  8, MPP_UNUSED },
+        {  9, MPP_UNUSED },
+        { 10, MPP_UNUSED },
+        { 11, MPP_UNUSED },
+        { 12, MPP_SATA_LED },   /* SATA 0 presence */
+        { 13, MPP_SATA_LED },   /* SATA 1 presence */
+        { 14, MPP_SATA_LED },   /* SATA 0 active */
+        { 15, MPP_SATA_LED },   /* SATA 1 active */
+        /* 16: Power LED control (0 = On, 1 = Off) */
+        { 16, MPP_GPIO },
+        /* 17: Power LED control select (0 = CPLD, 1 = GPIO16) */
+        { 17, MPP_GPIO },
+        /* 18: Power button status (0 = Released, 1 = Pressed) */
+        { 18, MPP_GPIO },
+        { 19, MPP_UNUSED },
+        { -1 }
+};
+
+static void __init edmini_v2_init(void)
+{
+        /*
+         * Setup basic Orion functions. Need to be called early.
+         */
+        orion5x_init();
+
+        orion5x_mpp_conf(edminiv2_mpp_modes);
+
+        /*
+         * Configure peripherals.
+         */
+        orion5x_ehci0_init();
+        orion5x_eth_init(&edmini_v2_eth_data);
+        orion5x_i2c_init();
+        orion5x_sata_init(&edmini_v2_sata_data);
+        orion5x_uart0_init();
+
+        orion5x_setup_dev_boot_win(EDMINI_V2_NOR_BOOT_BASE,
+                                EDMINI_V2_NOR_BOOT_SIZE);
+        platform_device_register(&edmini_v2_nor_flash);
+        platform_device_register(&edmini_v2_gpio_leds);
+        platform_device_register(&edmini_v2_gpio_buttons);
+
+        pr_notice("edmini_v2: USB device port, flash write and power-off "
+                  "are not yet supported.\n");
+
+        /* Get RTC IRQ and register the chip */
+        if (gpio_request(EDMINIV2_RTC_GPIO, "rtc") == 0) {
+                if (gpio_direction_input(EDMINIV2_RTC_GPIO) == 0)
+                        edmini_v2_i2c_rtc.irq = gpio_to_irq(EDMINIV2_RTC_GPIO);
+                else
+                        gpio_free(EDMINIV2_RTC_GPIO);
+        }
+
+        if (edmini_v2_i2c_rtc.irq == 0)
+                pr_warning("edmini_v2: failed to get RTC IRQ\n");
+
+        i2c_register_board_info(0, &edmini_v2_i2c_rtc, 1);
+}
+
+/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
+MACHINE_START(EDMINI_V2, "LaCie Ethernet Disk mini V2")
+        /* Maintainer: Christopher Moore <moore@free.fr> */
+        .phys_io        = ORION5X_REGS_PHYS_BASE,
+        .io_pg_offst    = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+        .boot_params    = 0x00000100,
+        .init_machine   = edmini_v2_init,
+        .map_io         = orion5x_map_io,
+        .init_irq       = orion5x_init_irq,
+        .timer          = &orion5x_timer,
+        .fixup          = tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
index 61eb74a88862..e67c843baa02 100644
--- a/arch/arm/mach-orion5x/include/mach/orion5x.h
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -2,7 +2,7 @@
  * arch/arm/mach-orion5x/include/mach/orion5x.h
  *
  * Generic definitions of Orion SoC flavors:
- *  Orion-1, Orion-VoIP, Orion-NAS, and Orion-2.
+ *  Orion-1, Orion-VoIP, Orion-NAS, Orion-2, and Orion-1-90.
  *
  * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
  *
@@ -76,6 +76,9 @@
 #define MV88F5281_REV_D0        4
 #define MV88F5281_REV_D1        5
 #define MV88F5281_REV_D2        6
+/* Orion-1-90 (88F6183) */
+#define MV88F6183_DEV_ID        0x6183
+#define MV88F6183_REV_B0        3
 
 /*******************************************************************************
  * Orion Registers Map
@@ -86,6 +89,7 @@
 #define ORION5X_DEV_BUS_PHYS_BASE       (ORION5X_REGS_PHYS_BASE | 0x10000)
 #define ORION5X_DEV_BUS_VIRT_BASE       (ORION5X_REGS_VIRT_BASE | 0x10000)
 #define ORION5X_DEV_BUS_REG(x)          (ORION5X_DEV_BUS_VIRT_BASE | (x))
+#define  SPI_PHYS_BASE                  (ORION5X_DEV_BUS_PHYS_BASE | 0x0600)
 #define  I2C_PHYS_BASE                  (ORION5X_DEV_BUS_PHYS_BASE | 0x1000)
 #define  UART0_PHYS_BASE                (ORION5X_DEV_BUS_PHYS_BASE | 0x2000)
 #define  UART0_VIRT_BASE                (ORION5X_DEV_BUS_VIRT_BASE | 0x2000)
diff --git a/arch/arm/mach-orion5x/include/mach/timex.h b/arch/arm/mach-orion5x/include/mach/timex.h
index e82e44db7629..4c69820e0810 100644
--- a/arch/arm/mach-orion5x/include/mach/timex.h
+++ b/arch/arm/mach-orion5x/include/mach/timex.h
@@ -9,5 +9,3 @@
  */
 
 #define CLOCK_TICK_RATE         (100 * HZ)
-
-#define ORION5X_TCLK            166666667
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index e321ec331839..c5bd54d8aa0c 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -293,7 +293,7 @@ static void kurobox_pro_power_off(void)
         const unsigned char shutdownwait[]      = {0x00, 0x0c};
         const unsigned char poweroff[]          = {0x00, 0x06};
         /* 38400 baud divisor */
-        const unsigned divisor = ((ORION5X_TCLK + (8 * 38400)) / (16 * 38400));
+        const unsigned divisor = ((orion5x_tclk + (8 * 38400)) / (16 * 38400));
 
         pr_info("%s: triggering power-off...\n", __func__);
 
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
new file mode 100644
index 000000000000..e0c43b8beb72
--- /dev/null
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -0,0 +1,279 @@
+/*
+ * arch/arm/mach-orion5x/lsmini-setup.c
+ *
+ * Maintainer: Alexey Kopytko <alexey@kopytko.ru>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <asm/mach-types.h>
+#include <linux/gpio.h>
+#include <asm/mach/arch.h>
+#include "common.h"
+#include "mpp.h"
+#include "include/mach/system.h"
+
+/*****************************************************************************
+ * Linkstation Mini Info
+ ****************************************************************************/
+
+/*
+ * 256K NOR flash Device bus boot chip select
+ */
+
+#define LSMINI_NOR_BOOT_BASE    0xf4000000
+#define LSMINI_NOR_BOOT_SIZE    SZ_256K
+
+/*****************************************************************************
+ * 256KB NOR Flash on BOOT Device
+ ****************************************************************************/
+
+static struct physmap_flash_data lsmini_nor_flash_data = {
+        .width          = 1,
+};
+
+static struct resource lsmini_nor_flash_resource = {
+        .flags  = IORESOURCE_MEM,
+        .start  = LSMINI_NOR_BOOT_BASE,
+        .end    = LSMINI_NOR_BOOT_BASE + LSMINI_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device lsmini_nor_flash = {
+        .name                   = "physmap-flash",
+        .id                     = 0,
+        .dev            = {
+                .platform_data  = &lsmini_nor_flash_data,
+        },
+        .num_resources          = 1,
+        .resource               = &lsmini_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data lsmini_eth_data = {
+        .phy_addr       = 8,
+};
+
+/*****************************************************************************
+ * RTC 5C372a on I2C bus
+ ****************************************************************************/
+
+static struct i2c_board_info __initdata lsmini_i2c_rtc = {
+        I2C_BOARD_INFO("rs5c372a", 0x32),
+};
+
+/*****************************************************************************
+ * LEDs attached to GPIO
+ ****************************************************************************/
+
+#define LSMINI_GPIO_LED_ALARM   2
+#define LSMINI_GPIO_LED_INFO    3
+#define LSMINI_GPIO_LED_FUNC    9
+#define LSMINI_GPIO_LED_PWR     14
+
+static struct gpio_led lsmini_led_pins[] = {
+        {
+                .name      = "alarm:red",
+                .gpio      = LSMINI_GPIO_LED_ALARM,
+                .active_low     = 1,
+        }, {
+                .name      = "info:amber",
+                .gpio      = LSMINI_GPIO_LED_INFO,
+                .active_low     = 1,
+        }, {
+                .name      = "func:blue:top",
+                .gpio      = LSMINI_GPIO_LED_FUNC,
+                .active_low     = 1,
+        }, {
+                .name      = "power:blue:bottom",
+                .gpio      = LSMINI_GPIO_LED_PWR,
+        },
+};
+
+static struct gpio_led_platform_data lsmini_led_data = {
+        .leds      = lsmini_led_pins,
+        .num_leds       = ARRAY_SIZE(lsmini_led_pins),
+};
+
+static struct platform_device lsmini_leds = {
+        .name   = "leds-gpio",
+        .id     = -1,
+        .dev    = {
+                .platform_data  = &lsmini_led_data,
+        },
+};
+
+/****************************************************************************
+ * GPIO Attached Keys
+ ****************************************************************************/
+
+#define LSMINI_GPIO_KEY_FUNC       15
+#define LSMINI_GPIO_KEY_POWER      18
+#define LSMINI_GPIO_KEY_AUTOPOWER 17
+
+#define LSMINI_SW_POWER         0x00
+#define LSMINI_SW_AUTOPOWER     0x01
+
+static struct gpio_keys_button lsmini_buttons[] = {
+        {
+                .code      = KEY_OPTION,
+                .gpio      = LSMINI_GPIO_KEY_FUNC,
+                .desc      = "Function Button",
+                .active_low     = 1,
+        }, {
+                .type           = EV_SW,
+                .code      = LSMINI_SW_POWER,
+                .gpio      = LSMINI_GPIO_KEY_POWER,
+                .desc      = "Power-on Switch",
+                .active_low     = 1,
+        }, {
+                .type           = EV_SW,
+                .code      = LSMINI_SW_AUTOPOWER,
+                .gpio      = LSMINI_GPIO_KEY_AUTOPOWER,
+                .desc      = "Power-auto Switch",
+                .active_low     = 1,
+        },
+};
+
+static struct gpio_keys_platform_data lsmini_button_data = {
+        .buttons        = lsmini_buttons,
+        .nbuttons       = ARRAY_SIZE(lsmini_buttons),
+};
+
+static struct platform_device lsmini_button_device = {
+        .name      = "gpio-keys",
+        .id          = -1,
+        .num_resources  = 0,
+        .dev        = {
+                .platform_data  = &lsmini_button_data,
+        },
+};
+
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct mv_sata_platform_data lsmini_sata_data = {
+        .n_ports        = 2,
+};
+
+
+/*****************************************************************************
+ * Linkstation Mini specific power off method: reboot
+ ****************************************************************************/
+/*
+ * On the Linkstation Mini, the shutdown process is following:
+ * - Userland monitors key events until the power switch goes to off position
+ * - The board reboots
+ * - U-boot starts and goes into an idle mode waiting for the user
+ *   to move the switch to ON position
+ */
+
+static void lsmini_power_off(void)
+{
+        arch_reset(0);
+}
+
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+#define LSMINI_GPIO_USB_POWER   16
+#define LSMINI_GPIO_AUTO_POWER  17
+#define LSMINI_GPIO_POWER       18
+
+#define LSMINI_GPIO_HDD_POWER0  1
+#define LSMINI_GPIO_HDD_POWER1  19
+
+static struct orion5x_mpp_mode lsmini_mpp_modes[] __initdata = {
+        {  0, MPP_UNUSED }, /* LED_RESERVE1 (unused) */
+        {  1, MPP_GPIO }, /* HDD_PWR */
+        {  2, MPP_GPIO }, /* LED_ALARM */
+        {  3, MPP_GPIO }, /* LED_INFO */
+        {  4, MPP_UNUSED },
+        {  5, MPP_UNUSED },
+        {  6, MPP_UNUSED },
+        {  7, MPP_UNUSED },
+        {  8, MPP_UNUSED },
+        {  9, MPP_GPIO }, /* LED_FUNC */
+        { 10, MPP_UNUSED },
+        { 11, MPP_UNUSED }, /* LED_ETH (dummy) */
+        { 12, MPP_UNUSED },
+        { 13, MPP_UNUSED },
+        { 14, MPP_GPIO }, /* LED_PWR */
+        { 15, MPP_GPIO }, /* FUNC */
+        { 16, MPP_GPIO }, /* USB_PWR */
+        { 17, MPP_GPIO }, /* AUTO_POWER */
+        { 18, MPP_GPIO }, /* POWER */
+        { 19, MPP_GPIO }, /* HDD_PWR1 */
+        { -1 },
+};
+
+static void __init lsmini_init(void)
+{
+        /*
+         * Setup basic Orion functions. Need to be called early.
+         */
+        orion5x_init();
+
+        orion5x_mpp_conf(lsmini_mpp_modes);
+
+        /*
+         * Configure peripherals.
+         */
+        orion5x_ehci0_init();
+        orion5x_ehci1_init();
+        orion5x_eth_init(&lsmini_eth_data);
+        orion5x_i2c_init();
+        orion5x_sata_init(&lsmini_sata_data);
+        orion5x_uart0_init();
+        orion5x_xor_init();
+
+        orion5x_setup_dev_boot_win(LSMINI_NOR_BOOT_BASE,
+                                   LSMINI_NOR_BOOT_SIZE);
+        platform_device_register(&lsmini_nor_flash);
+
+        platform_device_register(&lsmini_button_device);
+
+        platform_device_register(&lsmini_leds);
+
+        i2c_register_board_info(0, &lsmini_i2c_rtc, 1);
+
+        /* enable USB power */
+        gpio_set_value(LSMINI_GPIO_USB_POWER, 1);
+
+        /* register power-off method */
+        pm_power_off = lsmini_power_off;
+
+        pr_info("%s: finished\n", __func__);
+}
+
+#ifdef CONFIG_MACH_LINKSTATION_MINI
+MACHINE_START(LINKSTATION_MINI, "Buffalo Linkstation Mini")
+        /* Maintainer: Alexey Kopytko <alexey@kopytko.ru> */
+        .phys_io        = ORION5X_REGS_PHYS_BASE,
+        .io_pg_offst    = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+        .boot_params    = 0x00000100,
+        .init_machine   = lsmini_init,
+        .map_io         = orion5x_map_io,
+        .init_irq       = orion5x_init_irq,
+        .timer          = &orion5x_timer,
+        .fixup          = tag_fixup_mem32,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
new file mode 100644
index 000000000000..40e049539091
--- /dev/null
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -0,0 +1,117 @@
+/*
+ * arch/arm/mach-orion5x/rd88f6183-ap-ge-setup.c
+ *
+ * Marvell Orion-1-90 AP GE Reference Design Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/spi/flash.h>
+#include <linux/ethtool.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/leds.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data rd88f6183ap_ge_eth_data = {
+        .phy_addr       = -1,
+        .speed          = SPEED_1000,
+        .duplex         = DUPLEX_FULL,
+};
+
+static struct mtd_partition rd88f6183ap_ge_partitions[] = {
+        {
+                .name   = "kernel",
+                .offset = 0x00000000,
+                .size   = 0x00200000,
+        }, {
+                .name   = "rootfs",
+                .offset = 0x00200000,
+                .size   = 0x00500000,
+        }, {
+                .name   = "nvram",
+                .offset = 0x00700000,
+                .size   = 0x00080000,
+        },
+};
+
+static struct flash_platform_data rd88f6183ap_ge_spi_slave_data = {
+        .type           = "m25p64",
+        .nr_parts       = ARRAY_SIZE(rd88f6183ap_ge_partitions),
+        .parts          = rd88f6183ap_ge_partitions,
+};
+
+static struct spi_board_info __initdata rd88f6183ap_ge_spi_slave_info[] = {
+        {
+                .modalias       = "m25p80",
+                .platform_data  = &rd88f6183ap_ge_spi_slave_data,
+                .irq            = NO_IRQ,
+                .max_speed_hz   = 20000000,
+                .bus_num        = 0,
+                .chip_select    = 0,
+        },
+};
+
+static void __init rd88f6183ap_ge_init(void)
+{
+        /*
+         * Setup basic Orion functions. Need to be called early.
+         */
+        orion5x_init();
+
+        /*
+         * Configure peripherals.
+         */
+        orion5x_ehci0_init();
+        orion5x_eth_init(&rd88f6183ap_ge_eth_data);
+        spi_register_board_info(rd88f6183ap_ge_spi_slave_info,
+                                ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info));
+        orion5x_spi_init();
+        orion5x_uart0_init();
+}
+
+static struct hw_pci rd88f6183ap_ge_pci __initdata = {
+        .nr_controllers = 2,
+        .swizzle        = pci_std_swizzle,
+        .setup          = orion5x_pci_sys_setup,
+        .scan           = orion5x_pci_sys_scan_bus,
+        .map_irq        = orion5x_pci_map_irq,
+};
+
+static int __init rd88f6183ap_ge_pci_init(void)
+{
+        if (machine_is_rd88f6183ap_ge()) {
+                orion5x_pci_disable();
+                pci_common_init(&rd88f6183ap_ge_pci);
+        }
+
+        return 0;
+}
+subsys_initcall(rd88f6183ap_ge_pci_init);
+
+MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design")
+        /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
+        .phys_io        = ORION5X_REGS_PHYS_BASE,
+        .io_pg_offst    = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+        .boot_params    = 0x00000100,
+        .init_machine   = rd88f6183ap_ge_init,
+        .map_io         = orion5x_map_io,
+        .init_irq       = orion5x_init_irq,
+        .timer          = &orion5x_timer,
+        .fixup          = tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
new file mode 100644
index 000000000000..0b101d7d41c2
--- /dev/null
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -0,0 +1,369 @@
+/*
+ * Buffalo Terastation Pro II/Live Board Setup
+ *
+ * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <linux/serial_reg.h>
+#include <asm/mach-types.h>
+#include <asm/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * Terastation Pro 2/Live Info
+ ****************************************************************************/
+
+/*
+ * Terastation Pro 2 hardware :
+ * - Marvell 88F5281-D0
+ * - Marvell 88SX6042 SATA controller (PCI)
+ * - Marvell 88E1118 Gigabit Ethernet PHY
+ * - 256KB NOR flash
+ * - 128MB of DDR RAM
+ * - PCIe port (not equipped)
+ */
+
+/*
+ * 256K NOR flash Device bus boot chip select
+ */
+
+#define TSP2_NOR_BOOT_BASE      0xf4000000
+#define TSP2_NOR_BOOT_SIZE      SZ_256K
+
+/*****************************************************************************
+ * 256KB NOR Flash on BOOT Device
+ ****************************************************************************/
+
+static struct physmap_flash_data tsp2_nor_flash_data = {
+        .width    = 1,
+};
+
+static struct resource tsp2_nor_flash_resource = {
+        .flags = IORESOURCE_MEM,
+        .start = TSP2_NOR_BOOT_BASE,
+        .end   = TSP2_NOR_BOOT_BASE + TSP2_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device tsp2_nor_flash = {
+        .name          = "physmap-flash",
+        .id            = 0,
+        .dev           = {
+                .platform_data  = &tsp2_nor_flash_data,
+        },
+        .num_resources = 1,
+        .resource      = &tsp2_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+#define TSP2_PCI_SLOT0_OFFS             7
+#define TSP2_PCI_SLOT0_IRQ_PIN          11
+
+void __init tsp2_pci_preinit(void)
+{
+        int pin;
+
+        /*
+         * Configure PCI GPIO IRQ pins
+         */
+        pin = TSP2_PCI_SLOT0_IRQ_PIN;
+        if (gpio_request(pin, "PCI Int1") == 0) {
+                if (gpio_direction_input(pin) == 0) {
+                        set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+                } else {
+                        printk(KERN_ERR "tsp2_pci_preinit failed "
+                                        "to set_irq_type pin %d\n", pin);
+                        gpio_free(pin);
+                }
+        } else {
+                printk(KERN_ERR "tsp2_pci_preinit failed to "
+                                "gpio_request %d\n", pin);
+        }
+}
+
+static int __init tsp2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+        int irq;
+
+        /*
+         * Check for devices with hard-wired IRQs.
+         */
+        irq = orion5x_pci_map_irq(dev, slot, pin);
+        if (irq != -1)
+                return irq;
+
+        /*
+         * PCI IRQs are connected via GPIOs.
+         */
+        if (slot == TSP2_PCI_SLOT0_OFFS)
+                return gpio_to_irq(TSP2_PCI_SLOT0_IRQ_PIN);
+
+        return -1;
+}
+
+static struct hw_pci tsp2_pci __initdata = {
+        .nr_controllers = 2,
+        .preinit        = tsp2_pci_preinit,
+        .swizzle        = pci_std_swizzle,
+        .setup          = orion5x_pci_sys_setup,
+        .scan           = orion5x_pci_sys_scan_bus,
+        .map_irq        = tsp2_pci_map_irq,
+};
+
+static int __init tsp2_pci_init(void)
+{
+        if (machine_is_terastation_pro2())
+                pci_common_init(&tsp2_pci);
+
+        return 0;
+}
+
+subsys_initcall(tsp2_pci_init);
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data tsp2_eth_data = {
+        .phy_addr       = 0,
+};
+
+/*****************************************************************************
+ * RTC 5C372a on I2C bus
+ ****************************************************************************/
+
+#define TSP2_RTC_GPIO   9
+
+static struct i2c_board_info __initdata tsp2_i2c_rtc = {
+        I2C_BOARD_INFO("rs5c372a", 0x32),
+};
+
+/*****************************************************************************
+ * Terastation Pro II specific power off method via UART1-attached
+ * microcontroller
+ ****************************************************************************/
+
+#define UART1_REG(x)    (UART1_VIRT_BASE + ((UART_##x) << 2))
+
+static int tsp2_miconread(unsigned char *buf, int count)
+{
+        int i;
+        int timeout;
+
+        for (i = 0; i < count; i++) {
+                timeout = 10;
+
+                while (!(readl(UART1_REG(LSR)) & UART_LSR_DR)) {
+                        if (--timeout == 0)
+                                break;
+                        udelay(1000);
+                }
+
+                if (timeout == 0)
+                        break;
+                buf[i] = readl(UART1_REG(RX));
+        }
+
+        /* return read bytes */
+        return i;
+}
+
+static int tsp2_miconwrite(const unsigned char *buf, int count)
+{
+        int i = 0;
+
+        while (count--) {
+                while (!(readl(UART1_REG(LSR)) & UART_LSR_THRE))
+                        barrier();
+                writel(buf[i++], UART1_REG(TX));
+        }
+
+        return 0;
+}
+
+static int tsp2_miconsend(const unsigned char *data, int count)
+{
+        int i;
+        unsigned char checksum = 0;
+        unsigned char recv_buf[40];
+        unsigned char send_buf[40];
+        unsigned char correct_ack[3];
+        int retry = 2;
+
+        /* Generate checksum */
+        for (i = 0; i < count; i++)
+                checksum -=  data[i];
+
+        do {
+                /* Send data */
+                tsp2_miconwrite(data, count);
+
+                /* send checksum */
+                tsp2_miconwrite(&checksum, 1);
+
+                if (tsp2_miconread(recv_buf, sizeof(recv_buf)) <= 3) {
+                        printk(KERN_ERR ">%s: receive failed.\n", __func__);
+
+                        /* send preamble to clear the receive buffer */
+                        memset(&send_buf, 0xff, sizeof(send_buf));
+                        tsp2_miconwrite(send_buf, sizeof(send_buf));
+
+                        /* make dummy reads */
+                        mdelay(100);
+                        tsp2_miconread(recv_buf, sizeof(recv_buf));
+                } else {
+                        /* Generate expected ack */
+                        correct_ack[0] = 0x01;
+                        correct_ack[1] = data[1];
+                        correct_ack[2] = 0x00;
+
+                        /* checksum Check */
+                        if ((recv_buf[0] + recv_buf[1] + recv_buf[2] +
+                             recv_buf[3]) & 0xFF) {
+                                printk(KERN_ERR ">%s: Checksum Error : "
+                                        "Received data[%02x, %02x, %02x, %02x]"
+                                        "\n", __func__, recv_buf[0],
+                                        recv_buf[1], recv_buf[2], recv_buf[3]);
+                        } else {
+                                /* Check Received Data */
+                                if (correct_ack[0] == recv_buf[0] &&
+                                    correct_ack[1] == recv_buf[1] &&
+                                    correct_ack[2] == recv_buf[2]) {
+                                        /* Interval for next command */
+                                        mdelay(10);
+
+                                        /* Receive ACK */
+                                        return 0;
+                                }
+                        }
+                        /* Received NAK or illegal Data */
+                        printk(KERN_ERR ">%s: Error : NAK or Illegal Data "
+                                        "Received\n", __func__);
+                }
+        } while (retry--);
+
+        /* Interval for next command */
+        mdelay(10);
+
+        return -1;
+}
+
+static void tsp2_power_off(void)
+{
+        const unsigned char watchdogkill[]      = {0x01, 0x35, 0x00};
+        const unsigned char shutdownwait[]      = {0x00, 0x0c};
+        const unsigned char poweroff[]          = {0x00, 0x06};
+        /* 38400 baud divisor */
+        const unsigned divisor = ((orion5x_tclk + (8 * 38400)) / (16 * 38400));
+
+        pr_info("%s: triggering power-off...\n", __func__);
+
+        /* hijack uart1 and reset into sane state (38400,8n1,even parity) */
+        writel(0x83, UART1_REG(LCR));
+        writel(divisor & 0xff, UART1_REG(DLL));
+        writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+        writel(0x1b, UART1_REG(LCR));
+        writel(0x00, UART1_REG(IER));
+        writel(0x07, UART1_REG(FCR));
+        writel(0x00, UART1_REG(MCR));
+
+        /* Send the commands to shutdown the Terastation Pro II */
+        tsp2_miconsend(watchdogkill, sizeof(watchdogkill)) ;
+        tsp2_miconsend(shutdownwait, sizeof(shutdownwait)) ;
+        tsp2_miconsend(poweroff, sizeof(poweroff));
+}
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static struct orion5x_mpp_mode tsp2_mpp_modes[] __initdata = {
+        {  0, MPP_PCIE_RST_OUTn },
+        {  1, MPP_UNUSED },
+        {  2, MPP_UNUSED },
+        {  3, MPP_UNUSED },
+        {  4, MPP_NAND },               /* BOOT NAND Flash REn */
+        {  5, MPP_NAND },               /* BOOT NAND Flash WEn */
+        {  6, MPP_NAND },               /* BOOT NAND Flash HREn[0] */
+        {  7, MPP_NAND },               /* BOOT NAND Flash WEn[0] */
+        {  8, MPP_GPIO },               /* MICON int */
+        {  9, MPP_GPIO },               /* RTC int */
+        { 10, MPP_UNUSED },
+        { 11, MPP_GPIO },               /* PCI Int A */
+        { 12, MPP_UNUSED },
+        { 13, MPP_GPIO },               /* UPS on UART0 enable */
+        { 14, MPP_GPIO },               /* UPS low battery detection */
+        { 15, MPP_UNUSED },
+        { 16, MPP_UART },               /* UART1 RXD */
+        { 17, MPP_UART },               /* UART1 TXD */
+        { 18, MPP_UART },               /* UART1 CTSn */
+        { 19, MPP_UART },               /* UART1 RTSn */
+        { -1 },
+};
+
+static void __init tsp2_init(void)
+{
+        /*
+         * Setup basic Orion functions. Need to be called early.
+         */
+        orion5x_init();
+
+        orion5x_mpp_conf(tsp2_mpp_modes);
+
+        /*
+         * Configure peripherals.
+         */
+        orion5x_setup_dev_boot_win(TSP2_NOR_BOOT_BASE,
+                                   TSP2_NOR_BOOT_SIZE);
+        platform_device_register(&tsp2_nor_flash);
+
+        orion5x_ehci0_init();
+        orion5x_eth_init(&tsp2_eth_data);
+        orion5x_i2c_init();
+        orion5x_uart0_init();
+        orion5x_uart1_init();
+
+        /* Get RTC IRQ and register the chip */
+        if (gpio_request(TSP2_RTC_GPIO, "rtc") == 0) {
+                if (gpio_direction_input(TSP2_RTC_GPIO) == 0)
+                        tsp2_i2c_rtc.irq = gpio_to_irq(TSP2_RTC_GPIO);
+                else
+                        gpio_free(TSP2_RTC_GPIO);
+        }
+        if (tsp2_i2c_rtc.irq == 0)
+                pr_warning("tsp2_init: failed to get RTC IRQ\n");
+        i2c_register_board_info(0, &tsp2_i2c_rtc, 1);
+
+        /* register Terastation Pro II specific power-off method */
+        pm_power_off = tsp2_power_off;
+}
+
+MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
+        /* Maintainer:  Sylver Bruneau <sylver.bruneau@googlemail.com> */
+        .phys_io        = ORION5X_REGS_PHYS_BASE,
+        .io_pg_offst    = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+        .boot_params    = 0x00000100,
+        .init_machine   = tsp2_init,
+        .map_io         = orion5x_map_io,
+        .init_irq       = orion5x_init_irq,
+        .timer          = &orion5x_timer,
+        .fixup          = tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/tsx09-common.c b/arch/arm/mach-orion5x/tsx09-common.c
index 83feac3147a6..5128da1101bf 100644
--- a/arch/arm/mach-orion5x/tsx09-common.c
+++ b/arch/arm/mach-orion5x/tsx09-common.c
@@ -16,6 +16,7 @@
 #include <linux/timex.h>
 #include <linux/serial_reg.h>
 #include "tsx09-common.h"
+#include "common.h"
 
 /*****************************************************************************
  * QNAP TS-x09 specific power off method via UART1-attached PIC
@@ -26,7 +27,7 @@
 void qnap_tsx09_power_off(void)
 {
         /* 19200 baud divisor */
-        const unsigned divisor = ((ORION5X_TCLK + (8 * 19200)) / (16 * 19200));
+        const unsigned divisor = ((orion5x_tclk + (8 * 19200)) / (16 * 19200));
 
         pr_info("%s: triggering power-off...\n", __func__);