mv643xx_eth: use auto phy polling for configuring (R)(G)MII interface

The mv643xx_eth hardware has a provision for polling the PHY's
MII management registers to obtain the (R)(G)MII interface speed
(10/100/1000) and duplex (half/full) and pause (off/symmetric)
settings to use to talk to the PHY.

The driver currently does not make use of this feature.  Instead,
whenever there is a link status change event, it reads the current
link parameters from the PHY, and programs those parameters into
the mv643xx_eth MAC by hand.

This patch switches the mv643xx_eth driver to letting the MAC
auto-determine the (R)(G)MII link parameters by PHY polling, if there
is a PHY present.  For PHYless ports (when e.g. the (R)(G)MII
interface is connected to a hardware switch), we keep hardcoding the
MII interface parameters.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>

1 files changed, 3 insertions, 0 deletions

diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index aeab55c6a82d..9b8ee8c48bf0 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -14,6 +14,7 @@
 #include <linux/delay.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
@@ -100,6 +101,8 @@ static struct platform_device wrt350n_v2_nor_flash = {
 
 static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = {
         .phy_addr       = -1,
+        .speed          = SPEED_1000,
+        .duplex         = DUPLEX_FULL,
 };
 
 static void __init wrt350n_v2_init(void)