[ARM] Orion: instantiate the dsa switch driver

This adds DSA switch instantiation hooks to the orion5x and the
kirkwood ARM SoC platform code, and instantiates the DSA switch
driver on the 88F5181L FXO RD, the 88F5181L GE RD, the 6183 AP GE
RD, the Linksys WRT350n v2, and the 88F6281 RD boards.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Tested-by: Nicolas Pitre <nico@marvell.com>
Tested-by: Peter van Valderen <linux@ddcrew.com>
Tested-by: Dirk Teurlings <dirk@upexia.nl>
Signed-off-by: Nicolas Pitre <nico@marvell.com>

1 files changed, 11 insertions, 0 deletions

diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index ebde81416499..8ad3934399d4 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -17,6 +17,7 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
 #include <linux/i2c.h>
+#include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/leds.h>
@@ -94,6 +95,15 @@ static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = {
         .duplex         = DUPLEX_FULL,
 };
 
+static struct dsa_platform_data rd88f5181l_ge_switch_data = {
+        .port_names[0]  = "lan2",
+        .port_names[1]  = "lan1",
+        .port_names[2]  = "wan",
+        .port_names[3]  = "cpu",
+        .port_names[5]  = "lan4",
+        .port_names[7]  = "lan3",
+};
+
 static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
         I2C_BOARD_INFO("ds1338", 0x68),
 };
@@ -112,6 +122,7 @@ static void __init rd88f5181l_ge_init(void)
          */
         orion5x_ehci0_init();
         orion5x_eth_init(&rd88f5181l_ge_eth_data);
+        orion5x_eth_switch_init(&rd88f5181l_ge_switch_data, gpio_to_irq(8));
         orion5x_i2c_init();
         orion5x_uart0_init();