arm: orion5x: convert 'LaCie Ethernet Disk mini v2' to Device Tree

This commit converts the 'LaCie Ethernet Disk mini v2' board to the
Device Tree. All devices that have existing Device Tree bindings are
converted over to the Device Tree, the other devices remain
instantiated in the old way, until the respective drivers get the
needed Device Tree bindings.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested by: Maxime Hadjinlian <mhadjinlian@lacie.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

1 files changed, 1 insertions, 87 deletions

diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c
index 355e962137c7..d675e727803d 100644
--- a/arch/arm/mach-orion5x/edmini_v2-setup.c
+++ b/arch/arm/mach-orion5x/edmini_v2-setup.c
@@ -115,69 +115,6 @@ static struct i2c_board_info __initdata edmini_v2_i2c_rtc = {
 };
 
 /*****************************************************************************
- * Sata
- ****************************************************************************/
-
-static struct mv_sata_platform_data edmini_v2_sata_data = {
-        .n_ports        = 2,
-};
-
-/*****************************************************************************
- * GPIO LED (simple - doesn't use hardware blinking support)
- ****************************************************************************/
-
-#define EDMINI_V2_GPIO_LED_POWER        16
-
-static struct gpio_led edmini_v2_leds[] = {
-        {
-                .name = "power:blue",
-                .gpio = EDMINI_V2_GPIO_LED_POWER,
-                .active_low = 1,
-        },
-};
-
-static struct gpio_led_platform_data edmini_v2_led_data = {
-        .num_leds = ARRAY_SIZE(edmini_v2_leds),
-        .leds = edmini_v2_leds,
-};
-
-static struct platform_device edmini_v2_gpio_leds = {
-        .name           = "leds-gpio",
-        .id             = -1,
-        .dev            = {
-                .platform_data  = &edmini_v2_led_data,
-        },
-};
-
-/****************************************************************************
- * GPIO key
- ****************************************************************************/
-
-#define EDMINI_V2_GPIO_KEY_POWER        18
-
-static struct gpio_keys_button edmini_v2_buttons[] = {
-        {
-                .code           = KEY_POWER,
-                .gpio           = EDMINI_V2_GPIO_KEY_POWER,
-                .desc           = "Power Button",
-                .active_low     = 0,
-        },
-};
-
-static struct gpio_keys_platform_data edmini_v2_button_data = {
-        .buttons        = edmini_v2_buttons,
-        .nbuttons       = ARRAY_SIZE(edmini_v2_buttons),
-};
-
-static struct platform_device edmini_v2_gpio_buttons = {
-        .name           = "gpio-keys",
-        .id             = -1,
-        .dev            = {
-                .platform_data  = &edmini_v2_button_data,
-        },
-};
-
-/*****************************************************************************
  * General Setup
  ****************************************************************************/
 static unsigned int edminiv2_mpp_modes[] __initdata = {
@@ -207,13 +144,8 @@ static unsigned int edminiv2_mpp_modes[] __initdata = {
         0,
 };
 
-static void __init edmini_v2_init(void)
+void __init edmini_v2_init(void)
 {
-        /*
-         * Setup basic Orion functions. Need to be called early.
-         */
-        orion5x_init();
-
         orion5x_mpp_conf(edminiv2_mpp_modes);
 
         /*
@@ -221,15 +153,10 @@ static void __init edmini_v2_init(void)
          */
         orion5x_ehci0_init();
         orion5x_eth_init(&edmini_v2_eth_data);
-        orion5x_i2c_init();
-        orion5x_sata_init(&edmini_v2_sata_data);
-        orion5x_uart0_init();
 
         orion5x_setup_dev_boot_win(EDMINI_V2_NOR_BOOT_BASE,
                                 EDMINI_V2_NOR_BOOT_SIZE);
         platform_device_register(&edmini_v2_nor_flash);
-        platform_device_register(&edmini_v2_gpio_leds);
-        platform_device_register(&edmini_v2_gpio_buttons);
 
         pr_notice("edmini_v2: USB device port, flash write and power-off "
                   "are not yet supported.\n");
@@ -247,16 +174,3 @@ static void __init edmini_v2_init(void)
 
         i2c_register_board_info(0, &edmini_v2_i2c_rtc, 1);
 }
-
-/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
-MACHINE_START(EDMINI_V2, "LaCie Ethernet Disk mini V2")
-        /* Maintainer: Christopher Moore <moore@free.fr> */
-        .atag_offset    = 0x100,
-        .init_machine   = edmini_v2_init,
-        .map_io         = orion5x_map_io,
-        .init_early     = orion5x_init_early,
-        .init_irq       = orion5x_init_irq,
-        .timer          = &orion5x_timer,
-        .fixup          = tag_fixup_mem32,
-        .restart        = orion5x_restart,
-MACHINE_END