ARM: OMAP2+: cleaned-up DT support of various ECC schemes

OMAP NAND driver support multiple ECC scheme, which can used in different
flavours, depending on in-build Hardware engines present on SoC.

This patch updates following in DT bindings related to sectionion of ecc-schemes
- ti,elm-id: replaces elm_id (maintains backward compatibility)
- ti,nand-ecc-opts: selection of h/w or s/w implementation of an ecc-scheme
	depends on ti,elm-id. (supported values ham1, bch4, and bch8)
- maintain backward compatibility to deprecated DT bindings (sw, hw, hw-romcode)

Below table shows different flavours of ecc-schemes supported by OMAP devices
+---------------------------------------+---------------+---------------+
| ECC scheme                            |ECC calculation|Error detection|
+---------------------------------------+---------------+---------------+
|OMAP_ECC_HAM1_CODE_HW                  |H/W (GPMC)     |S/W            |
+---------------------------------------+---------------+---------------+
|OMAP_ECC_BCH8_CODE_HW_DETECTION_SW     |H/W (GPMC)     |S/W            |
|(requires CONFIG_MTD_NAND_ECC_BCH)     |               |               |
+---------------------------------------+---------------+---------------+
|OMAP_ECC_BCH8_CODE_HW                  |H/W (GPMC)     |H/W (ELM)      |
|(requires CONFIG_MTD_NAND_OMAP_BCH &&  |               |               |
| ti,elm-id in DT)                      |               |               |
+---------------------------------------+---------------+---------------+

To optimize footprint of omap2-nand driver, selection of some ECC schemes
also require enabling following Kconfigs, in addition to setting appropriate
DT bindings
- Kconfig:CONFIG_MTD_NAND_ECC_BCH        error detection done in software
- Kconfig:CONFIG_MTD_NAND_OMAP_BCH       error detection done by h/w engine

Signed-off-by: Pekon Gupta <pekon@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

1 files changed, 34 insertions, 14 deletions

diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 579697adaae7..c877129142ba 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -1341,14 +1341,6 @@ static void __maybe_unused gpmc_read_timings_dt(struct device_node *np,
 
 #ifdef CONFIG_MTD_NAND
 
-static const char * const nand_ecc_opts[] = {
-        [OMAP_ECC_HAMMING_CODE_DEFAULT]         = "sw",
-        [OMAP_ECC_HAMMING_CODE_HW]              = "hw",
-        [OMAP_ECC_HAMMING_CODE_HW_ROMCODE]      = "hw-romcode",
-        [OMAP_ECC_BCH4_CODE_HW]                 = "bch4",
-        [OMAP_ECC_BCH8_CODE_HW]                 = "bch8",
-};
-
 static const char * const nand_xfer_types[] = {
         [NAND_OMAP_PREFETCH_POLLED]             = "prefetch-polled",
         [NAND_OMAP_POLLED]                      = "polled",
@@ -1378,13 +1370,41 @@ static int gpmc_probe_nand_child(struct platform_device *pdev,
         gpmc_nand_data->cs = val;
         gpmc_nand_data->of_node = child;
 
-        if (!of_property_read_string(child, "ti,nand-ecc-opt", &s))
-                for (val = 0; val < ARRAY_SIZE(nand_ecc_opts); val++)
-                        if (!strcasecmp(s, nand_ecc_opts[val])) {
-                                gpmc_nand_data->ecc_opt = val;
-                                break;
-                        }
+        /* Detect availability of ELM module */
+        gpmc_nand_data->elm_of_node = of_parse_phandle(child, "ti,elm-id", 0);
+        if (gpmc_nand_data->elm_of_node == NULL)
+                gpmc_nand_data->elm_of_node =
+                                        of_parse_phandle(child, "elm_id", 0);
+        if (gpmc_nand_data->elm_of_node == NULL)
+                pr_warn("%s: ti,elm-id property not found\n", __func__);
+
+        /* select ecc-scheme for NAND */
+        if (of_property_read_string(child, "ti,nand-ecc-opt", &s)) {
+                pr_err("%s: ti,nand-ecc-opt not found\n", __func__);
+                return -ENODEV;
+        }
+        if (!strcmp(s, "ham1") || !strcmp(s, "sw") ||
+                !strcmp(s, "hw") || !strcmp(s, "hw-romcode"))
+                gpmc_nand_data->ecc_opt =
+                                OMAP_ECC_HAM1_CODE_HW;
+        else if (!strcmp(s, "bch4"))
+                if (gpmc_nand_data->elm_of_node)
+                        gpmc_nand_data->ecc_opt =
+                                OMAP_ECC_BCH4_CODE_HW;
+                else
+                        gpmc_nand_data->ecc_opt =
+                                OMAP_ECC_BCH4_CODE_HW_DETECTION_SW;
+        else if (!strcmp(s, "bch8"))
+                if (gpmc_nand_data->elm_of_node)
+                        gpmc_nand_data->ecc_opt =
+                                OMAP_ECC_BCH8_CODE_HW;
+                else
+                        gpmc_nand_data->ecc_opt =
+                                OMAP_ECC_BCH8_CODE_HW_DETECTION_SW;
+        else
+                pr_err("%s: ti,nand-ecc-opt invalid value\n", __func__);
 
+        /* select data transfer mode for NAND controller */
         if (!of_property_read_string(child, "ti,nand-xfer-type", &s))
                 for (val = 0; val < ARRAY_SIZE(nand_xfer_types); val++)
                         if (!strcasecmp(s, nand_xfer_types[val])) {