ARM: OMAP3: gpmc: add BCH ecc api and modes

This patch adds a simple BCH ecc computation api, similar to the
existing Hamming ecc api. It is intended to be used by the MTD layer.
It implements the following features:

- support 4-bit and 8-bit ecc computation
- do not protect user bytes in spare area, only data area is protected
- ecc for an erased NAND page (0xFFs) is also a sequence of 0xFFs

This last feature is obtained by adding a constant polynomial to
the hardware computed ecc. It allows to correct bitflips in blank pages
and is extremely useful to support filesystems such as UBIFS, which expect
erased pages to contain only 0xFFs.

This api has been tested on an OMAP3630 board.

Artem: The OMAP maintainer Tony Lindgren gave us his blessing for merging
this patch via the MTD tree.

Signed-off-by: Ivan Djelic <ivan.djelic@parrot.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

1 files changed, 184 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 00d510858e28..1ca8d7fd625a 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -49,6 +49,7 @@
 #define GPMC_ECC_CONTROL        0x1f8
 #define GPMC_ECC_SIZE_CONFIG    0x1fc
 #define GPMC_ECC1_RESULT        0x200
+#define GPMC_ECC_BCH_RESULT_0   0x240   /* not available on OMAP2 */
 
 #define GPMC_CS0_OFFSET         0x60
 #define GPMC_CS_SIZE            0x30
@@ -920,3 +921,186 @@ int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code)
         return 0;
 }
 EXPORT_SYMBOL_GPL(gpmc_calculate_ecc);
+
+#ifdef CONFIG_ARCH_OMAP3
+
+/**
+ * gpmc_init_hwecc_bch - initialize hardware BCH ecc functionality
+ * @cs: chip select number
+ * @nsectors: how many 512-byte sectors to process
+ * @nerrors: how many errors to correct per sector (4 or 8)
+ *
+ * This function must be executed before any call to gpmc_enable_hwecc_bch.
+ */
+int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors)
+{
+        /* check if ecc module is in use */
+        if (gpmc_ecc_used != -EINVAL)
+                return -EINVAL;
+
+        /* support only OMAP3 class */
+        if (!cpu_is_omap34xx()) {
+                printk(KERN_ERR "BCH ecc is not supported on this CPU\n");
+                return -EINVAL;
+        }
+
+        /*
+         * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1.
+         * Other chips may be added if confirmed to work.
+         */
+        if ((nerrors == 4) &&
+            (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) {
+                printk(KERN_ERR "BCH 4-bit mode is not supported on this CPU\n");
+                return -EINVAL;
+        }
+
+        /* sanity check */
+        if (nsectors > 8) {
+                printk(KERN_ERR "BCH cannot process %d sectors (max is 8)\n",
+                       nsectors);
+                return -EINVAL;
+        }
+
+        return 0;
+}
+EXPORT_SYMBOL_GPL(gpmc_init_hwecc_bch);
+
+/**
+ * gpmc_enable_hwecc_bch - enable hardware BCH ecc functionality
+ * @cs: chip select number
+ * @mode: read/write mode
+ * @dev_width: device bus width(1 for x16, 0 for x8)
+ * @nsectors: how many 512-byte sectors to process
+ * @nerrors: how many errors to correct per sector (4 or 8)
+ */
+int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors,
+                          int nerrors)
+{
+        unsigned int val;
+
+        /* check if ecc module is in use */
+        if (gpmc_ecc_used != -EINVAL)
+                return -EINVAL;
+
+        gpmc_ecc_used = cs;
+
+        /* clear ecc and enable bits */
+        gpmc_write_reg(GPMC_ECC_CONTROL, 0x1);
+
+        /*
+         * When using BCH, sector size is hardcoded to 512 bytes.
+         * Here we are using wrapping mode 6 both for reading and writing, with:
+         *  size0 = 0  (no additional protected byte in spare area)
+         *  size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
+         */
+        gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, (32 << 22) | (0 << 12));
+
+        /* BCH configuration */
+        val = ((1                        << 16) | /* enable BCH */
+               (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */
+               (0x06                     <<  8) | /* wrap mode = 6 */
+               (dev_width                <<  7) | /* bus width */
+               (((nsectors-1) & 0x7)     <<  4) | /* number of sectors */
+               (cs                       <<  1) | /* ECC CS */
+               (0x1));                            /* enable ECC */
+
+        gpmc_write_reg(GPMC_ECC_CONFIG, val);
+        gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
+        return 0;
+}
+EXPORT_SYMBOL_GPL(gpmc_enable_hwecc_bch);
+
+/**
+ * gpmc_calculate_ecc_bch4 - Generate 7 ecc bytes per sector of 512 data bytes
+ * @cs:  chip select number
+ * @dat: The pointer to data on which ecc is computed
+ * @ecc: The ecc output buffer
+ */
+int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc)
+{
+        int i;
+        unsigned long nsectors, reg, val1, val2;
+
+        if (gpmc_ecc_used != cs)
+                return -EINVAL;
+
+        nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1;
+
+        for (i = 0; i < nsectors; i++) {
+
+                reg = GPMC_ECC_BCH_RESULT_0 + 16*i;
+
+                /* Read hw-computed remainder */
+                val1 = gpmc_read_reg(reg + 0);
+                val2 = gpmc_read_reg(reg + 4);
+
+                /*
+                 * Add constant polynomial to remainder, in order to get an ecc
+                 * sequence of 0xFFs for a buffer filled with 0xFFs; and
+                 * left-justify the resulting polynomial.
+                 */
+                *ecc++ = 0x28 ^ ((val2 >> 12) & 0xFF);
+                *ecc++ = 0x13 ^ ((val2 >>  4) & 0xFF);
+                *ecc++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF));
+                *ecc++ = 0x39 ^ ((val1 >> 20) & 0xFF);
+                *ecc++ = 0x96 ^ ((val1 >> 12) & 0xFF);
+                *ecc++ = 0xac ^ ((val1 >> 4) & 0xFF);
+                *ecc++ = 0x7f ^ ((val1 & 0xF) << 4);
+        }
+
+        gpmc_ecc_used = -EINVAL;
+        return 0;
+}
+EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch4);
+
+/**
+ * gpmc_calculate_ecc_bch8 - Generate 13 ecc bytes per block of 512 data bytes
+ * @cs:  chip select number
+ * @dat: The pointer to data on which ecc is computed
+ * @ecc: The ecc output buffer
+ */
+int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc)
+{
+        int i;
+        unsigned long nsectors, reg, val1, val2, val3, val4;
+
+        if (gpmc_ecc_used != cs)
+                return -EINVAL;
+
+        nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1;
+
+        for (i = 0; i < nsectors; i++) {
+
+                reg = GPMC_ECC_BCH_RESULT_0 + 16*i;
+
+                /* Read hw-computed remainder */
+                val1 = gpmc_read_reg(reg + 0);
+                val2 = gpmc_read_reg(reg + 4);
+                val3 = gpmc_read_reg(reg + 8);
+                val4 = gpmc_read_reg(reg + 12);
+
+                /*
+                 * Add constant polynomial to remainder, in order to get an ecc
+                 * sequence of 0xFFs for a buffer filled with 0xFFs.
+                 */
+                *ecc++ = 0xef ^ (val4 & 0xFF);
+                *ecc++ = 0x51 ^ ((val3 >> 24) & 0xFF);
+                *ecc++ = 0x2e ^ ((val3 >> 16) & 0xFF);
+                *ecc++ = 0x09 ^ ((val3 >> 8) & 0xFF);
+                *ecc++ = 0xed ^ (val3 & 0xFF);
+                *ecc++ = 0x93 ^ ((val2 >> 24) & 0xFF);
+                *ecc++ = 0x9a ^ ((val2 >> 16) & 0xFF);
+                *ecc++ = 0xc2 ^ ((val2 >> 8) & 0xFF);
+                *ecc++ = 0x97 ^ (val2 & 0xFF);
+                *ecc++ = 0x79 ^ ((val1 >> 24) & 0xFF);
+                *ecc++ = 0xe5 ^ ((val1 >> 16) & 0xFF);
+                *ecc++ = 0x24 ^ ((val1 >> 8) & 0xFF);
+                *ecc++ = 0xb5 ^ (val1 & 0xFF);
+        }
+
+        gpmc_ecc_used = -EINVAL;
+        return 0;
+}
+EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch8);
+
+#endif /* CONFIG_ARCH_OMAP3 */