musb: am35x: fix compile error due to control apis

commit 4814ced5116e3b73dc4f63eec84999739fc8ed11 (OMAP:
control: move plat-omap/control.h to mach-omap2/control.h)
moved <plat/control.h> to another location, preventing
drivers from accessing it, so we need to pass function
pointers from arch code to be able to talk to internal
PHY on AM35x.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

1 files changed, 97 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 9107883287f6..5298949d4b11 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -30,9 +30,102 @@
 #include <mach/irqs.h>
 #include <mach/am35xx.h>
 #include <plat/usb.h>
+#include "control.h"
 
 #if defined(CONFIG_USB_MUSB_OMAP2PLUS) || defined (CONFIG_USB_MUSB_AM35X)
 
+static void am35x_musb_reset(void)
+{
+        u32     regval;
+
+        /* Reset the musb interface */
+        regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+
+        regval |= AM35XX_USBOTGSS_SW_RST;
+        omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
+
+        regval &= ~AM35XX_USBOTGSS_SW_RST;
+        omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
+
+        regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+}
+
+static void am35x_musb_phy_power(u8 on)
+{
+        unsigned long timeout = jiffies + msecs_to_jiffies(100);
+        u32 devconf2;
+
+        if (on) {
+                /*
+                 * Start the on-chip PHY and its PLL.
+                 */
+                devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
+
+                devconf2 &= ~(CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN);
+                devconf2 |= CONF2_PHY_PLLON;
+
+                omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
+
+                pr_info(KERN_INFO "Waiting for PHY clock good...\n");
+                while (!(omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2)
+                                & CONF2_PHYCLKGD)) {
+                        cpu_relax();
+
+                        if (time_after(jiffies, timeout)) {
+                                pr_err(KERN_ERR "musb PHY clock good timed out\n");
+                                break;
+                        }
+                }
+        } else {
+                /*
+                 * Power down the on-chip PHY.
+                 */
+                devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
+
+                devconf2 &= ~CONF2_PHY_PLLON;
+                devconf2 |=  CONF2_PHYPWRDN | CONF2_OTGPWRDN;
+                omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
+        }
+}
+
+static void am35x_musb_clear_irq(void)
+{
+        u32 regval;
+
+        regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+        regval |= AM35XX_USBOTGSS_INT_CLR;
+        omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
+        regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+}
+
+static void am35x_musb_set_mode(u8 musb_mode)
+{
+        u32 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
+
+        devconf2 &= ~CONF2_OTGMODE;
+        switch (musb_mode) {
+#ifdef  CONFIG_USB_MUSB_HDRC_HCD
+        case MUSB_HOST:         /* Force VBUS valid, ID = 0 */
+                devconf2 |= CONF2_FORCE_HOST;
+                break;
+#endif
+#ifdef  CONFIG_USB_GADGET_MUSB_HDRC
+        case MUSB_PERIPHERAL:   /* Force VBUS valid, ID = 1 */
+                devconf2 |= CONF2_FORCE_DEVICE;
+                break;
+#endif
+#ifdef  CONFIG_USB_MUSB_OTG
+        case MUSB_OTG:          /* Don't override the VBUS/ID comparators */
+                devconf2 |= CONF2_NO_OVERRIDE;
+                break;
+#endif
+        default:
+                pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode);
+        }
+
+        omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
+}
+
 static struct resource musb_resources[] = {
         [0] = { /* start and end set dynamically */
                 .flags  = IORESOURCE_MEM,
@@ -96,6 +189,10 @@ void __init usb_musb_init(struct omap_musb_board_data *board_data)
                 musb_device.name = "musb-am35x";
                 musb_resources[0].start = AM35XX_IPSS_USBOTGSS_BASE;
                 musb_resources[1].start = INT_35XX_USBOTG_IRQ;
+                board_data->set_phy_power = am35x_musb_phy_power;
+                board_data->clear_irq = am35x_musb_clear_irq;
+                board_data->set_mode = am35x_musb_set_mode;
+                board_data->reset = am35x_musb_reset;
         } else if (cpu_is_omap34xx()) {
                 musb_resources[0].start = OMAP34XX_HSUSB_OTG_BASE;
         } else if (cpu_is_omap44xx()) {