OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx*

The OMAP2 clock code currently #includes a large .h file full of static
data structures.  Instead, define the data in a .c file.

Russell King <linux@arm.linux.org.uk> proposed this new arrangement:

    http://marc.info/?l=linux-omap&m=125967425908895&w=2

This patch also deals with most of the flagrant checkpatch violations.

While here, separate the prcm_config data structures out into their own
files, opp2xxx.h and opp24{2,3}0_data.c, and only build in the OPP tables
for the target device.  This should save some memory.  In the long run,
these prcm_config tables should be replaced with OPP code.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Nishanth Menon <nm@ti.com>

1 files changed, 424 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/opp2xxx.h b/arch/arm/mach-omap2/opp2xxx.h
new file mode 100644
index 000000000000..ed6df04e2f29
--- /dev/null
+++ b/arch/arm/mach-omap2/opp2xxx.h
@@ -0,0 +1,424 @@
+/*
+ * opp2xxx.h - macros for old-style OMAP2xxx "OPP" definitions
+ *
+ * Copyright (C) 2005-2009 Texas Instruments, Inc.
+ * Copyright (C) 2004-2009 Nokia Corporation
+ *
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
+ * These configurations are characterized by voltage and speed for clocks.
+ * The device is only validated for certain combinations. One way to express
+ * these combinations is via the 'ratio's' which the clocks operate with
+ * respect to each other. These ratio sets are for a given voltage/DPLL
+ * setting. All configurations can be described by a DPLL setting and a ratio
+ * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
+ *
+ * 2430 differs from 2420 in that there are no more phase synchronizers used.
+ * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
+ * 2430 (iva2.1, NOdsp, mdm)
+ *
+ * XXX Missing voltage data.
+ *
+ * THe format described in this file is deprecated.  Once a reasonable
+ * OPP API exists, the data in this file should be converted to use it.
+ *
+ * This is technically part of the OMAP2xxx clock code.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_OPP2XXX_H
+#define __ARCH_ARM_MACH_OMAP2_OPP2XXX_H
+
+/**
+ * struct prcm_config - define clock rates on a per-OPP basis (24xx)
+ *
+ * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+ * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
+ * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM
+ *
+ * This is deprecated.  As soon as we have a decent OPP API, we should
+ * move all this stuff to it.
+ */
+struct prcm_config {
+        unsigned long xtal_speed;       /* crystal rate */
+        unsigned long dpll_speed;       /* dpll: out*xtal*M/(N-1)table_recalc */
+        unsigned long mpu_speed;        /* speed of MPU */
+        unsigned long cm_clksel_mpu;    /* mpu divider */
+        unsigned long cm_clksel_dsp;    /* dsp+iva1 div(2420), iva2.1(2430) */
+        unsigned long cm_clksel_gfx;    /* gfx dividers */
+        unsigned long cm_clksel1_core;  /* major subsystem dividers */
+        unsigned long cm_clksel1_pll;   /* m,n */
+        unsigned long cm_clksel2_pll;   /* dpllx1 or x2 out */
+        unsigned long cm_clksel_mdm;    /* modem dividers 2430 only */
+        unsigned long base_sdrc_rfr;    /* base refresh timing for a set */
+        unsigned char flags;
+};
+
+
+/* Core fields for cm_clksel, not ratio governed */
+#define RX_CLKSEL_DSS1                  (0x10 << 8)
+#define RX_CLKSEL_DSS2                  (0x0 << 13)
+#define RX_CLKSEL_SSI                   (0x5 << 20)
+
+/*-------------------------------------------------------------------------
+ * Voltage/DPLL ratios
+ *-------------------------------------------------------------------------*/
+
+/* 2430 Ratio's, 2430-Ratio Config 1 */
+#define R1_CLKSEL_L3                    (4 << 0)
+#define R1_CLKSEL_L4                    (2 << 5)
+#define R1_CLKSEL_USB                   (4 << 25)
+#define R1_CM_CLKSEL1_CORE_VAL          (R1_CLKSEL_USB | RX_CLKSEL_SSI | \
+                                         RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+                                         R1_CLKSEL_L4 | R1_CLKSEL_L3)
+#define R1_CLKSEL_MPU                   (2 << 0)
+#define R1_CM_CLKSEL_MPU_VAL            R1_CLKSEL_MPU
+#define R1_CLKSEL_DSP                   (2 << 0)
+#define R1_CLKSEL_DSP_IF                (2 << 5)
+#define R1_CM_CLKSEL_DSP_VAL            (R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF)
+#define R1_CLKSEL_GFX                   (2 << 0)
+#define R1_CM_CLKSEL_GFX_VAL            R1_CLKSEL_GFX
+#define R1_CLKSEL_MDM                   (4 << 0)
+#define R1_CM_CLKSEL_MDM_VAL            R1_CLKSEL_MDM
+
+/* 2430-Ratio Config 2 */
+#define R2_CLKSEL_L3                    (6 << 0)
+#define R2_CLKSEL_L4                    (2 << 5)
+#define R2_CLKSEL_USB                   (2 << 25)
+#define R2_CM_CLKSEL1_CORE_VAL          (R2_CLKSEL_USB | RX_CLKSEL_SSI | \
+                                         RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+                                         R2_CLKSEL_L4 | R2_CLKSEL_L3)
+#define R2_CLKSEL_MPU                   (2 << 0)
+#define R2_CM_CLKSEL_MPU_VAL            R2_CLKSEL_MPU
+#define R2_CLKSEL_DSP                   (2 << 0)
+#define R2_CLKSEL_DSP_IF                (3 << 5)
+#define R2_CM_CLKSEL_DSP_VAL            (R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF)
+#define R2_CLKSEL_GFX                   (2 << 0)
+#define R2_CM_CLKSEL_GFX_VAL            R2_CLKSEL_GFX
+#define R2_CLKSEL_MDM                   (6 << 0)
+#define R2_CM_CLKSEL_MDM_VAL            R2_CLKSEL_MDM
+
+/* 2430-Ratio Bootm (BYPASS) */
+#define RB_CLKSEL_L3                    (1 << 0)
+#define RB_CLKSEL_L4                    (1 << 5)
+#define RB_CLKSEL_USB                   (1 << 25)
+#define RB_CM_CLKSEL1_CORE_VAL          (RB_CLKSEL_USB | RX_CLKSEL_SSI | \
+                                         RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+                                         RB_CLKSEL_L4 | RB_CLKSEL_L3)
+#define RB_CLKSEL_MPU                   (1 << 0)
+#define RB_CM_CLKSEL_MPU_VAL            RB_CLKSEL_MPU
+#define RB_CLKSEL_DSP                   (1 << 0)
+#define RB_CLKSEL_DSP_IF                (1 << 5)
+#define RB_CM_CLKSEL_DSP_VAL            (RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF)
+#define RB_CLKSEL_GFX                   (1 << 0)
+#define RB_CM_CLKSEL_GFX_VAL            RB_CLKSEL_GFX
+#define RB_CLKSEL_MDM                   (1 << 0)
+#define RB_CM_CLKSEL_MDM_VAL            RB_CLKSEL_MDM
+
+/* 2420 Ratio Equivalents */
+#define RXX_CLKSEL_VLYNQ                (0x12 << 15)
+#define RXX_CLKSEL_SSI                  (0x8 << 20)
+
+/* 2420-PRCM III 532MHz core */
+#define RIII_CLKSEL_L3                  (4 << 0)        /* 133MHz */
+#define RIII_CLKSEL_L4                  (2 << 5)        /* 66.5MHz */
+#define RIII_CLKSEL_USB                 (4 << 25)       /* 33.25MHz */
+#define RIII_CM_CLKSEL1_CORE_VAL        (RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \
+                                         RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
+                                         RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \
+                                         RIII_CLKSEL_L3)
+#define RIII_CLKSEL_MPU                 (2 << 0)        /* 266MHz */
+#define RIII_CM_CLKSEL_MPU_VAL          RIII_CLKSEL_MPU
+#define RIII_CLKSEL_DSP                 (3 << 0)        /* c5x - 177.3MHz */
+#define RIII_CLKSEL_DSP_IF              (2 << 5)        /* c5x - 88.67MHz */
+#define RIII_SYNC_DSP                   (1 << 7)        /* Enable sync */
+#define RIII_CLKSEL_IVA                 (6 << 8)        /* iva1 - 88.67MHz */
+#define RIII_SYNC_IVA                   (1 << 13)       /* Enable sync */
+#define RIII_CM_CLKSEL_DSP_VAL          (RIII_SYNC_IVA | RIII_CLKSEL_IVA | \
+                                         RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \
+                                         RIII_CLKSEL_DSP)
+#define RIII_CLKSEL_GFX                 (2 << 0)        /* 66.5MHz */
+#define RIII_CM_CLKSEL_GFX_VAL          RIII_CLKSEL_GFX
+
+/* 2420-PRCM II 600MHz core */
+#define RII_CLKSEL_L3                   (6 << 0)        /* 100MHz */
+#define RII_CLKSEL_L4                   (2 << 5)        /* 50MHz */
+#define RII_CLKSEL_USB                  (2 << 25)       /* 50MHz */
+#define RII_CM_CLKSEL1_CORE_VAL         (RII_CLKSEL_USB | RXX_CLKSEL_SSI | \
+                                         RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
+                                         RX_CLKSEL_DSS1 | RII_CLKSEL_L4 | \
+                                         RII_CLKSEL_L3)
+#define RII_CLKSEL_MPU                  (2 << 0)        /* 300MHz */
+#define RII_CM_CLKSEL_MPU_VAL           RII_CLKSEL_MPU
+#define RII_CLKSEL_DSP                  (3 << 0)        /* c5x - 200MHz */
+#define RII_CLKSEL_DSP_IF               (2 << 5)        /* c5x - 100MHz */
+#define RII_SYNC_DSP                    (0 << 7)        /* Bypass sync */
+#define RII_CLKSEL_IVA                  (3 << 8)        /* iva1 - 200MHz */
+#define RII_SYNC_IVA                    (0 << 13)       /* Bypass sync */
+#define RII_CM_CLKSEL_DSP_VAL           (RII_SYNC_IVA | RII_CLKSEL_IVA | \
+                                         RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \
+                                         RII_CLKSEL_DSP)
+#define RII_CLKSEL_GFX                  (2 << 0)        /* 50MHz */
+#define RII_CM_CLKSEL_GFX_VAL           RII_CLKSEL_GFX
+
+/* 2420-PRCM I 660MHz core */
+#define RI_CLKSEL_L3                    (4 << 0)        /* 165MHz */
+#define RI_CLKSEL_L4                    (2 << 5)        /* 82.5MHz */
+#define RI_CLKSEL_USB                   (4 << 25)       /* 41.25MHz */
+#define RI_CM_CLKSEL1_CORE_VAL          (RI_CLKSEL_USB |                \
+                                         RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
+                                         RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+                                         RI_CLKSEL_L4 | RI_CLKSEL_L3)
+#define RI_CLKSEL_MPU                   (2 << 0)        /* 330MHz */
+#define RI_CM_CLKSEL_MPU_VAL            RI_CLKSEL_MPU
+#define RI_CLKSEL_DSP                   (3 << 0)        /* c5x - 220MHz */
+#define RI_CLKSEL_DSP_IF                (2 << 5)        /* c5x - 110MHz */
+#define RI_SYNC_DSP                     (1 << 7)        /* Activate sync */
+#define RI_CLKSEL_IVA                   (4 << 8)        /* iva1 - 165MHz */
+#define RI_SYNC_IVA                     (0 << 13)       /* Bypass sync */
+#define RI_CM_CLKSEL_DSP_VAL            (RI_SYNC_IVA | RI_CLKSEL_IVA |  \
+                                         RI_SYNC_DSP | RI_CLKSEL_DSP_IF | \
+                                         RI_CLKSEL_DSP)
+#define RI_CLKSEL_GFX                   (1 << 0)        /* 165MHz */
+#define RI_CM_CLKSEL_GFX_VAL            RI_CLKSEL_GFX
+
+/* 2420-PRCM VII (boot) */
+#define RVII_CLKSEL_L3                  (1 << 0)
+#define RVII_CLKSEL_L4                  (1 << 5)
+#define RVII_CLKSEL_DSS1                (1 << 8)
+#define RVII_CLKSEL_DSS2                (0 << 13)
+#define RVII_CLKSEL_VLYNQ               (1 << 15)
+#define RVII_CLKSEL_SSI                 (1 << 20)
+#define RVII_CLKSEL_USB                 (1 << 25)
+
+#define RVII_CM_CLKSEL1_CORE_VAL        (RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \
+                                         RVII_CLKSEL_VLYNQ | \
+                                         RVII_CLKSEL_DSS2 | RVII_CLKSEL_DSS1 | \
+                                         RVII_CLKSEL_L4 | RVII_CLKSEL_L3)
+
+#define RVII_CLKSEL_MPU                 (1 << 0) /* all divide by 1 */
+#define RVII_CM_CLKSEL_MPU_VAL          RVII_CLKSEL_MPU
+
+#define RVII_CLKSEL_DSP                 (1 << 0)
+#define RVII_CLKSEL_DSP_IF              (1 << 5)
+#define RVII_SYNC_DSP                   (0 << 7)
+#define RVII_CLKSEL_IVA                 (1 << 8)
+#define RVII_SYNC_IVA                   (0 << 13)
+#define RVII_CM_CLKSEL_DSP_VAL          (RVII_SYNC_IVA | RVII_CLKSEL_IVA | \
+                                         RVII_SYNC_DSP | RVII_CLKSEL_DSP_IF | \
+                                         RVII_CLKSEL_DSP)
+
+#define RVII_CLKSEL_GFX                 (1 << 0)
+#define RVII_CM_CLKSEL_GFX_VAL          RVII_CLKSEL_GFX
+
+/*-------------------------------------------------------------------------
+ * 2430 Target modes: Along with each configuration the CPU has several
+ * modes which goes along with them. Modes mainly are the addition of
+ * describe DPLL combinations to go along with a ratio.
+ *-------------------------------------------------------------------------*/
+
+/* Hardware governed */
+#define MX_48M_SRC                      (0 << 3)
+#define MX_54M_SRC                      (0 << 5)
+#define MX_APLLS_CLIKIN_12              (3 << 23)
+#define MX_APLLS_CLIKIN_13              (2 << 23)
+#define MX_APLLS_CLIKIN_19_2            (0 << 23)
+
+/*
+ * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed
+ * #5a  (ratio1) baseport-target, target DPLL = 266*2 = 532MHz
+ */
+#define M5A_DPLL_MULT_12                (133 << 12)
+#define M5A_DPLL_DIV_12                 (5 << 8)
+#define M5A_CM_CLKSEL1_PLL_12_VAL       (MX_48M_SRC | MX_54M_SRC | \
+                                         M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \
+                                         MX_APLLS_CLIKIN_12)
+#define M5A_DPLL_MULT_13                (61 << 12)
+#define M5A_DPLL_DIV_13                 (2 << 8)
+#define M5A_CM_CLKSEL1_PLL_13_VAL       (MX_48M_SRC | MX_54M_SRC | \
+                                         M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \
+                                         MX_APLLS_CLIKIN_13)
+#define M5A_DPLL_MULT_19                (55 << 12)
+#define M5A_DPLL_DIV_19                 (3 << 8)
+#define M5A_CM_CLKSEL1_PLL_19_VAL       (MX_48M_SRC | MX_54M_SRC | \
+                                         M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \
+                                         MX_APLLS_CLIKIN_19_2)
+/* #5b  (ratio1) target DPLL = 200*2 = 400MHz */
+#define M5B_DPLL_MULT_12                (50 << 12)
+#define M5B_DPLL_DIV_12                 (2 << 8)
+#define M5B_CM_CLKSEL1_PLL_12_VAL       (MX_48M_SRC | MX_54M_SRC | \
+                                         M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \
+                                         MX_APLLS_CLIKIN_12)
+#define M5B_DPLL_MULT_13                (200 << 12)
+#define M5B_DPLL_DIV_13                 (12 << 8)
+
+#define M5B_CM_CLKSEL1_PLL_13_VAL       (MX_48M_SRC | MX_54M_SRC | \
+                                         M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \
+                                         MX_APLLS_CLIKIN_13)
+#define M5B_DPLL_MULT_19                (125 << 12)
+#define M5B_DPLL_DIV_19                 (31 << 8)
+#define M5B_CM_CLKSEL1_PLL_19_VAL       (MX_48M_SRC | MX_54M_SRC | \
+                                         M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \
+                                         MX_APLLS_CLIKIN_19_2)
+/*
+ * #4   (ratio2), DPLL = 399*2 = 798MHz, L3=133MHz
+ */
+#define M4_DPLL_MULT_12                 (133 << 12)
+#define M4_DPLL_DIV_12                  (3 << 8)
+#define M4_CM_CLKSEL1_PLL_12_VAL        (MX_48M_SRC | MX_54M_SRC | \
+                                         M4_DPLL_DIV_12 | M4_DPLL_MULT_12 | \
+                                         MX_APLLS_CLIKIN_12)
+
+#define M4_DPLL_MULT_13                 (399 << 12)
+#define M4_DPLL_DIV_13                  (12 << 8)
+#define M4_CM_CLKSEL1_PLL_13_VAL        (MX_48M_SRC | MX_54M_SRC | \
+                                         M4_DPLL_DIV_13 | M4_DPLL_MULT_13 | \
+                                         MX_APLLS_CLIKIN_13)
+
+#define M4_DPLL_MULT_19                 (145 << 12)
+#define M4_DPLL_DIV_19                  (6 << 8)
+#define M4_CM_CLKSEL1_PLL_19_VAL        (MX_48M_SRC | MX_54M_SRC | \
+                                         M4_DPLL_DIV_19 | M4_DPLL_MULT_19 | \
+                                         MX_APLLS_CLIKIN_19_2)
+
+/*
+ * #3   (ratio2) baseport-target, target DPLL = 330*2 = 660MHz
+ */
+#define M3_DPLL_MULT_12                 (55 << 12)
+#define M3_DPLL_DIV_12                  (1 << 8)
+#define M3_CM_CLKSEL1_PLL_12_VAL        (MX_48M_SRC | MX_54M_SRC | \
+                                         M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \
+                                         MX_APLLS_CLIKIN_12)
+#define M3_DPLL_MULT_13                 (76 << 12)
+#define M3_DPLL_DIV_13                  (2 << 8)
+#define M3_CM_CLKSEL1_PLL_13_VAL        (MX_48M_SRC | MX_54M_SRC | \
+                                         M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \
+                                         MX_APLLS_CLIKIN_13)
+#define M3_DPLL_MULT_19                 (17 << 12)
+#define M3_DPLL_DIV_19                  (0 << 8)
+#define M3_CM_CLKSEL1_PLL_19_VAL        (MX_48M_SRC | MX_54M_SRC | \
+                                         M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \
+                                         MX_APLLS_CLIKIN_19_2)
+
+/*
+ * #2   (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz
+ */
+#define M2_DPLL_MULT_12                 (55 << 12)
+#define M2_DPLL_DIV_12                  (1 << 8)
+#define M2_CM_CLKSEL1_PLL_12_VAL        (MX_48M_SRC | MX_54M_SRC | \
+                                         M2_DPLL_DIV_12 | M2_DPLL_MULT_12 | \
+                                         MX_APLLS_CLIKIN_12)
+
+/* Speed changes - Used 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2,
+ * relock time issue */
+/* Core frequency changed from 330/165 to 329/164 MHz*/
+#define M2_DPLL_MULT_13                 (76 << 12)
+#define M2_DPLL_DIV_13                  (2 << 8)
+#define M2_CM_CLKSEL1_PLL_13_VAL        (MX_48M_SRC | MX_54M_SRC | \
+                                         M2_DPLL_DIV_13 | M2_DPLL_MULT_13 | \
+                                         MX_APLLS_CLIKIN_13)
+
+#define M2_DPLL_MULT_19                 (17 << 12)
+#define M2_DPLL_DIV_19                  (0 << 8)
+#define M2_CM_CLKSEL1_PLL_19_VAL        (MX_48M_SRC | MX_54M_SRC | \
+                                         M2_DPLL_DIV_19 | M2_DPLL_MULT_19 | \
+                                         MX_APLLS_CLIKIN_19_2)
+
+/* boot (boot) */
+#define MB_DPLL_MULT                    (1 << 12)
+#define MB_DPLL_DIV                     (0 << 8)
+#define MB_CM_CLKSEL1_PLL_12_VAL        (MX_48M_SRC | MX_54M_SRC | \
+                                         MB_DPLL_DIV | MB_DPLL_MULT | \
+                                         MX_APLLS_CLIKIN_12)
+
+#define MB_CM_CLKSEL1_PLL_13_VAL        (MX_48M_SRC | MX_54M_SRC | \
+                                         MB_DPLL_DIV | MB_DPLL_MULT | \
+                                         MX_APLLS_CLIKIN_13)
+
+#define MB_CM_CLKSEL1_PLL_19_VAL        (MX_48M_SRC | MX_54M_SRC | \
+                                         MB_DPLL_DIV | MB_DPLL_MULT | \
+                                         MX_APLLS_CLIKIN_19)
+
+/*
+ * 2430 - chassis (sedna)
+ * 165 (ratio1) same as above #2
+ * 150 (ratio1)
+ * 133 (ratio2) same as above #4
+ * 110 (ratio2) same as above #3
+ * 104 (ratio2)
+ * boot (boot)
+ */
+
+/* PRCM I target DPLL = 2*330MHz = 660MHz */
+#define MI_DPLL_MULT_12                 (55 << 12)
+#define MI_DPLL_DIV_12                  (1 << 8)
+#define MI_CM_CLKSEL1_PLL_12_VAL        (MX_48M_SRC | MX_54M_SRC | \
+                                         MI_DPLL_DIV_12 | MI_DPLL_MULT_12 | \
+                                         MX_APLLS_CLIKIN_12)
+
+/*
+ * 2420 Equivalent - mode registers
+ * PRCM II , target DPLL = 2*300MHz = 600MHz
+ */
+#define MII_DPLL_MULT_12                (50 << 12)
+#define MII_DPLL_DIV_12                 (1 << 8)
+#define MII_CM_CLKSEL1_PLL_12_VAL       (MX_48M_SRC | MX_54M_SRC |      \
+                                         MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \
+                                         MX_APLLS_CLIKIN_12)
+#define MII_DPLL_MULT_13                (300 << 12)
+#define MII_DPLL_DIV_13                 (12 << 8)
+#define MII_CM_CLKSEL1_PLL_13_VAL       (MX_48M_SRC | MX_54M_SRC |      \
+                                         MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \
+                                         MX_APLLS_CLIKIN_13)
+
+/* PRCM III target DPLL = 2*266 = 532MHz*/
+#define MIII_DPLL_MULT_12               (133 << 12)
+#define MIII_DPLL_DIV_12                (5 << 8)
+#define MIII_CM_CLKSEL1_PLL_12_VAL      (MX_48M_SRC | MX_54M_SRC |      \
+                                         MIII_DPLL_DIV_12 | \
+                                         MIII_DPLL_MULT_12 | MX_APLLS_CLIKIN_12)
+#define MIII_DPLL_MULT_13               (266 << 12)
+#define MIII_DPLL_DIV_13                (12 << 8)
+#define MIII_CM_CLKSEL1_PLL_13_VAL      (MX_48M_SRC | MX_54M_SRC |      \
+                                         MIII_DPLL_DIV_13 | \
+                                         MIII_DPLL_MULT_13 | MX_APLLS_CLIKIN_13)
+
+/* PRCM VII (boot bypass) */
+#define MVII_CM_CLKSEL1_PLL_12_VAL      MB_CM_CLKSEL1_PLL_12_VAL
+#define MVII_CM_CLKSEL1_PLL_13_VAL      MB_CM_CLKSEL1_PLL_13_VAL
+
+/* High and low operation value */
+#define MX_CLKSEL2_PLL_2x_VAL           (2 << 0)
+#define MX_CLKSEL2_PLL_1x_VAL           (1 << 0)
+
+/* MPU speed defines */
+#define S12M    12000000
+#define S13M    13000000
+#define S19M    19200000
+#define S26M    26000000
+#define S100M   100000000
+#define S133M   133000000
+#define S150M   150000000
+#define S164M   164000000
+#define S165M   165000000
+#define S199M   199000000
+#define S200M   200000000
+#define S266M   266000000
+#define S300M   300000000
+#define S329M   329000000
+#define S330M   330000000
+#define S399M   399000000
+#define S400M   400000000
+#define S532M   532000000
+#define S600M   600000000
+#define S658M   658000000
+#define S660M   660000000
+#define S798M   798000000
+
+
+extern const struct prcm_config omap2420_rate_table[];
+extern const struct prcm_config omap2430_rate_table[];
+extern const struct prcm_config *rate_table;
+extern const struct prcm_config *curr_prcm_set;
+
+#endif