ARM: OMAP3: mmc-twl4030 voltage cleanup

Correct twl4030 MMC power switching:  fix voltage ranges reported
for each slot, and handle them fully.

 Lies corrected:
  - MMC-1 doesn't support the 2.6-2.7 Volt range
  - MMC-2 can't normally support anything except 1.8V
 Omissions corrected
  - MMC-1 *does* handle the 2.8-2.9 Volt range
  - MMC-2 can handle 2.5-3.2 Volt cards, given a transceiver

Add transciever support for MMC-2; enable it for Overo and Pandora.
(Depends on something else to have set up pinmuxing for control
signals instead of as MMC2_DAT4..7 pins.)

Also shrink twl4030_hsmmc_info a smidgeon ... padding is all gone.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 2 insertions, 1 deletions

diff --git a/arch/arm/mach-omap2/mmc-twl4030.h b/arch/arm/mach-omap2/mmc-twl4030.h
index e1c8076400ca..380dde7bcfe3 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.h
+++ b/arch/arm/mach-omap2/mmc-twl4030.h
@@ -9,9 +9,10 @@
 struct twl4030_hsmmc_info {
         u8      mmc;            /* controller 1/2/3 */
         u8      wires;          /* 1/4/8 wires */
+        bool    transceiver;    /* MMC-2 option */
+        bool    ext_clock;      /* use external pin for input clock */
         int     gpio_cd;        /* or -EINVAL */
         int     gpio_wp;        /* or -EINVAL */
-        int     ext_clock:1;    /* use external pin for input clock */
 };
 
 #if     defined(CONFIG_TWL4030_CORE) && \