OMAP2xxx clock: move the DVFS virtual clock code into mach-omap2/clkt2xxx_virt_prcm_set.c

Move the DVFS virtual clock functions from clock2xxx.c to
mach-omap2/clkt2xxx_virt_prcm_set.c.  This is intended to make the
clock code easier to understand, since all of the functions needed to
manage the virt_prcm_set clock are now located in their own file,
rather than being mixed with other, unrelated functions.

Clock debugging is also now more finely-grained, since the DEBUG macro
can now be defined for the virt_prcm_set clock alone.  This should
reduce unnecessary console noise when debugging.

Also, if at some future point the mach-omap2/ directory is split into
OMAP2/3/4 variants, this clkt file can be placed in the mach-omap2xxx/
directory, rather than shared with other chip types that don't use
this clock type.

Thanks to Alexander Shishkin <virtuoso@slind.org> for his comments.
Thanks also to Kevin Hilman <khilman@deeprootsystems.com> for finding
and fixing a bug with the CONFIG_CPU_FREQ portion of this patch.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Alexander Shishkin <virtuoso@slind.org>
Cc: Kevin Hilman <khilman@deeprootsystems.com>

1 files changed, 0 insertions, 211 deletions

diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c
index 419ae80fa1d4..11d6edb0b32f 100644
--- a/arch/arm/mach-omap2/clock2xxx.c
+++ b/arch/arm/mach-omap2/clock2xxx.c
@@ -54,9 +54,6 @@
 #define APLLS_CLKIN_13MHZ               2
 #define APLLS_CLKIN_12MHZ               3
 
-const struct prcm_config *curr_prcm_set;
-const struct prcm_config *rate_table;
-
 struct clk *vclk, *sclk, *dclk;
 
 void __iomem *prcm_clksrc_ctrl;
@@ -185,214 +182,6 @@ const struct clkops clkops_apll54 = {
         .disable        = omap2_clk_apll_disable,
 };
 
-/**
- * omap2_table_mpu_recalc - just return the MPU speed
- * @clk: virt_prcm_set struct clk
- *
- * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
- */
-unsigned long omap2_table_mpu_recalc(struct clk *clk)
-{
-        return curr_prcm_set->mpu_speed;
-}
-
-/*
- * Look for a rate equal or less than the target rate given a configuration set.
- *
- * What's not entirely clear is "which" field represents the key field.
- * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
- * just uses the ARM rates.
- */
-long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
-{
-        const struct prcm_config *ptr;
-        long highest_rate;
-        long sys_ck_rate;
-
-        sys_ck_rate = clk_get_rate(sclk);
-
-        highest_rate = -EINVAL;
-
-        for (ptr = rate_table; ptr->mpu_speed; ptr++) {
-                if (!(ptr->flags & cpu_mask))
-                        continue;
-                if (ptr->xtal_speed != sys_ck_rate)
-                        continue;
-
-                highest_rate = ptr->mpu_speed;
-
-                /* Can check only after xtal frequency check */
-                if (ptr->mpu_speed <= rate)
-                        break;
-        }
-        return highest_rate;
-}
-
-/* Sets basic clocks based on the specified rate */
-int omap2_select_table_rate(struct clk *clk, unsigned long rate)
-{
-        u32 cur_rate, done_rate, bypass = 0, tmp;
-        const struct prcm_config *prcm;
-        unsigned long found_speed = 0;
-        unsigned long flags;
-        long sys_ck_rate;
-
-        sys_ck_rate = clk_get_rate(sclk);
-
-        for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-                if (!(prcm->flags & cpu_mask))
-                        continue;
-
-                if (prcm->xtal_speed != sys_ck_rate)
-                        continue;
-
-                if (prcm->mpu_speed <= rate) {
-                        found_speed = prcm->mpu_speed;
-                        break;
-                }
-        }
-
-        if (!found_speed) {
-                printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
-                       rate / 1000000);
-                return -EINVAL;
-        }
-
-        curr_prcm_set = prcm;
-        cur_rate = omap2xxx_clk_get_core_rate(dclk);
-
-        if (prcm->dpll_speed == cur_rate / 2) {
-                omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
-        } else if (prcm->dpll_speed == cur_rate * 2) {
-                omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
-        } else if (prcm->dpll_speed != cur_rate) {
-                local_irq_save(flags);
-
-                if (prcm->dpll_speed == prcm->xtal_speed)
-                        bypass = 1;
-
-                if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) ==
-                    CORE_CLK_SRC_DPLL_X2)
-                        done_rate = CORE_CLK_SRC_DPLL_X2;
-                else
-                        done_rate = CORE_CLK_SRC_DPLL;
-
-                /* MPU divider */
-                cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL);
-
-                /* dsp + iva1 div(2420), iva2.1(2430) */
-                cm_write_mod_reg(prcm->cm_clksel_dsp,
-                                 OMAP24XX_DSP_MOD, CM_CLKSEL);
-
-                cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL);
-
-                /* Major subsystem dividers */
-                tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
-                cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD,
-                                 CM_CLKSEL1);
-
-                if (cpu_is_omap2430())
-                        cm_write_mod_reg(prcm->cm_clksel_mdm,
-                                         OMAP2430_MDM_MOD, CM_CLKSEL);
-
-                /* x2 to enter omap2xxx_sdrc_init_params() */
-                omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
-
-                omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
-                               bypass);
-
-                omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
-                omap2xxx_sdrc_reprogram(done_rate, 0);
-
-                local_irq_restore(flags);
-        }
-
-        return 0;
-}
-
-#ifdef CONFIG_CPU_FREQ
-/*
- * Walk PRCM rate table and fillout cpufreq freq_table
- * XXX This should be replaced by an OPP layer in the near future
- */
-static struct cpufreq_frequency_table *freq_table;
-
-void omap2xxx_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
-{
-        const struct prcm_config *prcm;
-        long sys_ck_rate;
-        int i = 0;
-        int tbl_sz = 0;
-
-        if (!cpu_is_omap2xxx())
-                return;
-
-        sys_ck_rate = clk_get_rate(sclk);
-
-        for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-                if (!(prcm->flags & cpu_mask))
-                        continue;
-                if (prcm->xtal_speed != sys_ck_rate)
-                        continue;
-
-                /* don't put bypass rates in table */
-                if (prcm->dpll_speed == prcm->xtal_speed)
-                        continue;
-
-                tbl_sz++;
-        }
-
-        /*
-         * XXX Ensure that we're doing what CPUFreq expects for this error
-         * case and the following one
-         */
-        if (tbl_sz == 0) {
-                pr_warning("%s: no matching entries in rate_table\n",
-                           __func__);
-                return;
-        }
-
-        /* Include the CPUFREQ_TABLE_END terminator entry */
-        tbl_sz++;
-
-        freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz,
-                             GFP_ATOMIC);
-        if (!freq_table) {
-                pr_err("%s: could not kzalloc frequency table\n", __func__);
-                return;
-        }
-
-        for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-                if (!(prcm->flags & cpu_mask))
-                        continue;
-                if (prcm->xtal_speed != sys_ck_rate)
-                        continue;
-
-                /* don't put bypass rates in table */
-                if (prcm->dpll_speed == prcm->xtal_speed)
-                        continue;
-
-                freq_table[i].index = i;
-                freq_table[i].frequency = prcm->mpu_speed / 1000;
-                i++;
-        }
-
-        freq_table[i].index = i;
-        freq_table[i].frequency = CPUFREQ_TABLE_END;
-
-        *table = &freq_table[0];
-}
-
-void omap2xxx_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
-{
-        if (!cpu_is_omap2xxx())
-                return;
-
-        kfree(freq_table);
-}
-
-#endif
-
 static u32 omap2_get_apll_clkin(void)
 {
         u32 aplls, srate = 0;