mfd: Convert twl6040 to i2c driver, and separate it from twl core

Complete the separation of the twl6040 from the twl core since
it is a separate chip, not part of the twl6030 PMIC.

Make the needed Kconfig changes for the depending drivers at the
same time to avoid breaking the kernel build (vibra, ASoC components).

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonicro.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

1 files changed, 6 insertions, 7 deletions

diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index d8c0e89f0126..1b782ba53433 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -25,6 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/usb/otg.h>
 #include <linux/i2c/twl.h>
+#include <linux/mfd/twl6040.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
 #include <linux/wl12xx.h>
@@ -284,7 +285,7 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
         return 0;
 }
 
-static struct twl4030_codec_data twl6040_codec = {
+static struct twl6040_codec_data twl6040_codec = {
         /* single-step ramp for headset and handsfree */
         .hs_left_step   = 0x0f,
         .hs_right_step  = 0x0f,
@@ -292,17 +293,14 @@ static struct twl4030_codec_data twl6040_codec = {
         .hf_right_step  = 0x1d,
 };
 
-static struct twl4030_audio_data twl6040_audio = {
+static struct twl6040_platform_data twl6040_data = {
         .codec          = &twl6040_codec,
         .audpwron_gpio  = 127,
-        .naudint_irq    = OMAP44XX_IRQ_SYS_2N,
         .irq_base       = TWL6040_CODEC_IRQ_BASE,
 };
 
 /* Panda board uses the common PMIC configuration */
-static struct twl4030_platform_data omap4_panda_twldata = {
-        .audio          = &twl6040_audio,
-};
+static struct twl4030_platform_data omap4_panda_twldata;
 
 /*
  * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
@@ -326,7 +324,8 @@ static int __init omap4_panda_i2c_init(void)
                         TWL_COMMON_REGULATOR_VCXIO |
                         TWL_COMMON_REGULATOR_VUSB |
                         TWL_COMMON_REGULATOR_CLK32KG);
-        omap4_pmic_init("twl6030", &omap4_panda_twldata);
+        omap4_pmic_init("twl6030", &omap4_panda_twldata,
+                        &twl6040_data, OMAP44XX_IRQ_SYS_2N);
         omap_register_i2c_bus(2, 400, NULL, 0);
         /*
          * Bus 3 is attached to the DVI port where devices like the pico DLP