omap: musb: Pass board specific data from board file

Pass board specific data for MUSB (like interface_type,
mode etc) from board file by defining board
specific structure.

Each board file can define this structure based on
its requirement and pass this information to the
driver.

Signed-off-by: Maulik Mankad <x0082077@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Gupta Ajay Kumar <ajay.gupta@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 7 insertions, 1 deletions

diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 89a55f1d07e3..371019054b49 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -630,6 +630,12 @@ static void __init devkit8000_flash_init(void)
         }
 }
 
+static struct omap_musb_board_data musb_board_data = {
+        .interface_type         = MUSB_INTERFACE_ULPI,
+        .mode                   = MUSB_OTG,
+        .power                  = 100,
+};
+
 static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 
         .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
@@ -665,7 +671,7 @@ static void __init devkit8000_init(void)
         /* REVISIT leave DVI powered down until it's needed ... */
         gpio_direction_output(170, true);
 
-        usb_musb_init();
+        usb_musb_init(&musb_board_data);
         usb_ehci_init(&ehci_pdata);
         devkit8000_flash_init();