ARM: OMAP1: Make plat/mux.h omap1 only

We are moving omap2+ to use the device tree based pinctrl-single.c
and will be removing the old mux framework. This will remove the
omap1 specific parts from plat-omap.

Acked-by: Felipe Balbi <balbi@ti.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-usb@vger.kernel.org
Cc: linux-pcmcia@lists.infradead.org
Cc: spi-devel-general@lists.sourceforge.net
Signed-off-by: Tony Lindgren <tony@atomide.com>

24 files changed, 532 insertions, 24 deletions

diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 56446d2b2844..275d7e50ae10 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -37,7 +37,7 @@
 
 #include <plat/board-ams-delta.h>
 #include <linux/platform_data/keypad-omap.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 
 #include <mach/hardware.h>
 #include <mach/ams-delta-fiq.h>
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index ad5ba9f00efe..63aa634ce29f 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -28,7 +28,7 @@
 #include <asm/mach/map.h>
 
 #include <plat/tc.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/flash.h>
 #include <plat/fpga.h>
 #include <linux/platform_data/keypad-omap.h>
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 04b5fdaff831..4ec579fdd366 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -22,7 +22,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 
 #include <mach/usb.h>
 
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 519d827570bb..093297e50ec7 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -37,7 +37,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/dma.h>
 #include <plat/tc.h>
 #include <plat/irda.h>
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 4733eb510bad..adc0373299ec 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -39,7 +39,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/tc.h>
 #include <linux/platform_data/keypad-omap.h>
 #include <plat/dma.h>
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 083afa79dfb1..04a67230cc94 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -31,7 +31,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/flash.h>
 #include <plat/fpga.h>
 #include <plat/tc.h>
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 7b9fc99e705e..7d5c06d6a52a 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -28,7 +28,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/mmc.h>
 #include <plat/clock.h>
 
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index c780a1b80c2a..3ef0bba65b61 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -47,7 +47,7 @@
 #include <asm/mach/map.h>
 
 #include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/tc.h>
 
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index e46f5c2ea63f..b633b386240e 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -35,7 +35,7 @@
 #include <asm/mach/map.h>
 
 #include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/tc.h>
 #include <plat/dma.h>
 #include <plat/irda.h>
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index e1c842be749e..518b94dbeae1 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -35,7 +35,7 @@
 
 #include <plat/led.h>
 #include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/dma.h>
 #include <plat/tc.h>
 #include <plat/irda.h>
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index a71b7f59b7c3..f4a615d61f69 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -37,7 +37,7 @@
 #include <asm/mach/map.h>
 
 #include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/dma.h>
 #include <plat/tc.h>
 #include <plat/irda.h>
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 87797025d6bb..cc38e36b3764 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -29,7 +29,7 @@
 #include <asm/mach/map.h>
 
 #include <plat/tc.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/fpga.h>
 #include <plat/flash.h>
 
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index a6a1ab638292..2fddf6f0b39a 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -35,7 +35,7 @@
 #include <asm/mach/map.h>
 
 #include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/dma.h>
 #include <plat/irda.h>
 #include <plat/tc.h>
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 1668af3017de..bd7b3fc18a49 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -33,7 +33,7 @@
 
 #include <plat/board-voiceblue.h>
 #include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/tc.h>
 
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 05fdbd992c77..0cc54dd553e3 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -20,7 +20,7 @@
 #include <asm/mach/map.h>
 
 #include <plat/tc.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/dma.h>
 #include <plat/mmc.h>
 
diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c
index 5446c9912641..a0551a6d7451 100644
--- a/arch/arm/mach-omap1/i2c.c
+++ b/arch/arm/mach-omap1/i2c.c
@@ -20,7 +20,7 @@
  */
 
 #include <plat/i2c.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/cpu.h>
 
 void __init omap1_i2c_mux_pins(int bus_id)
diff --git a/arch/arm/mach-omap1/include/mach/mux.h b/arch/arm/mach-omap1/include/mach/mux.h
new file mode 100644
index 000000000000..323948959200
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/mux.h
@@ -0,0 +1,454 @@
+/*
+ * arch/arm/plat-omap/include/mach/mux.h
+ *
+ * Table of the Omap register configurations for the FUNC_MUX and
+ * PULL_DWN combinations.
+ *
+ * Copyright (C) 2004 - 2008 Texas Instruments Inc.
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: Please use the following naming style for new pin entries.
+ *       For example, W8_1610_MMC2_DAT0, where:
+ *       - W8        = ball
+ *       - 1610      = 1510 or 1610, none if common for both 1510 and 1610
+ *       - MMC2_DAT0 = function
+ */
+
+#ifndef __ASM_ARCH_MUX_H
+#define __ASM_ARCH_MUX_H
+
+#define PU_PD_SEL_NA            0       /* No pu_pd reg available */
+#define PULL_DWN_CTRL_NA        0       /* No pull-down control needed */
+
+#ifdef  CONFIG_OMAP_MUX_DEBUG
+#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
+                                        .mux_reg = FUNC_MUX_CTRL_##reg, \
+                                        .mask_offset = mode_offset, \
+                                        .mask = mode,
+
+#define PULL_REG(reg, bit, status)      .pull_name = "PULL_DWN_CTRL_"#reg, \
+                                        .pull_reg = PULL_DWN_CTRL_##reg, \
+                                        .pull_bit = bit, \
+                                        .pull_val = status,
+
+#define PU_PD_REG(reg, status)          .pu_pd_name = "PU_PD_SEL_"#reg, \
+                                        .pu_pd_reg = PU_PD_SEL_##reg, \
+                                        .pu_pd_val = status,
+
+#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \
+                                        .mux_reg = OMAP7XX_IO_CONF_##reg, \
+                                        .mask_offset = mode_offset, \
+                                        .mask = mode,
+
+#define PULL_REG_7XX(reg, bit, status)  .pull_name = "OMAP7XX_IO_CONF_"#reg, \
+                                        .pull_reg = OMAP7XX_IO_CONF_##reg, \
+                                        .pull_bit = bit, \
+                                        .pull_val = status,
+
+#else
+
+#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
+                                        .mask_offset = mode_offset, \
+                                        .mask = mode,
+
+#define PULL_REG(reg, bit, status)      .pull_reg = PULL_DWN_CTRL_##reg, \
+                                        .pull_bit = bit, \
+                                        .pull_val = status,
+
+#define PU_PD_REG(reg, status)          .pu_pd_reg = PU_PD_SEL_##reg, \
+                                        .pu_pd_val = status,
+
+#define MUX_REG_7XX(reg, mode_offset, mode) \
+                                        .mux_reg = OMAP7XX_IO_CONF_##reg, \
+                                        .mask_offset = mode_offset, \
+                                        .mask = mode,
+
+#define PULL_REG_7XX(reg, bit, status)  .pull_reg = OMAP7XX_IO_CONF_##reg, \
+                                        .pull_bit = bit, \
+                                        .pull_val = status,
+
+#endif /* CONFIG_OMAP_MUX_DEBUG */
+
+#define MUX_CFG(desc, mux_reg, mode_offset, mode,       \
+                pull_reg, pull_bit, pull_status,        \
+                pu_pd_reg, pu_pd_status, debug_status)  \
+{                                                       \
+        .name =  desc,                                  \
+        .debug = debug_status,                          \
+        MUX_REG(mux_reg, mode_offset, mode)             \
+        PULL_REG(pull_reg, pull_bit, pull_status)       \
+        PU_PD_REG(pu_pd_reg, pu_pd_status)              \
+},
+
+
+/*
+ * OMAP730/850 has a slightly different config for the pin mux.
+ * - config regs are the OMAP7XX_IO_CONF_x regs (see omap7xx.h) regs and
+ *   not the FUNC_MUX_CTRL_x regs from hardware.h
+ * - for pull-up/down, only has one enable bit which is is in the same register
+ *   as mux config
+ */
+#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode,   \
+                   pull_bit, pull_status, debug_status)\
+{                                                       \
+        .name =  desc,                                  \
+        .debug = debug_status,                          \
+        MUX_REG_7XX(mux_reg, mode_offset, mode)         \
+        PULL_REG_7XX(mux_reg, pull_bit, pull_status)    \
+        PU_PD_REG(NA, 0)                \
+},
+
+struct pin_config {
+        char                    *name;
+        const unsigned int      mux_reg;
+        unsigned char           debug;
+
+        const unsigned char mask_offset;
+        const unsigned char mask;
+
+        const char *pull_name;
+        const unsigned int pull_reg;
+        const unsigned char pull_val;
+        const unsigned char pull_bit;
+
+        const char *pu_pd_name;
+        const unsigned int pu_pd_reg;
+        const unsigned char pu_pd_val;
+
+#if     defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
+        const char *mux_reg_name;
+#endif
+
+};
+
+enum omap7xx_index {
+        /* OMAP 730 keyboard */
+        E2_7XX_KBR0,
+        J7_7XX_KBR1,
+        E1_7XX_KBR2,
+        F3_7XX_KBR3,
+        D2_7XX_KBR4,
+        C2_7XX_KBC0,
+        D3_7XX_KBC1,
+        E4_7XX_KBC2,
+        F4_7XX_KBC3,
+        E3_7XX_KBC4,
+
+        /* USB */
+        AA17_7XX_USB_DM,
+        W16_7XX_USB_PU_EN,
+        W17_7XX_USB_VBUSI,
+        W18_7XX_USB_DMCK_OUT,
+        W19_7XX_USB_DCRST,
+
+        /* MMC */
+        MMC_7XX_CMD,
+        MMC_7XX_CLK,
+        MMC_7XX_DAT0,
+
+        /* I2C */
+        I2C_7XX_SCL,
+        I2C_7XX_SDA,
+
+        /* SPI */
+        SPI_7XX_1,
+        SPI_7XX_2,
+        SPI_7XX_3,
+        SPI_7XX_4,
+        SPI_7XX_5,
+        SPI_7XX_6,
+
+        /* UART */
+        UART_7XX_1,
+        UART_7XX_2,
+};
+
+enum omap1xxx_index {
+        /* UART1 (BT_UART_GATING)*/
+        UART1_TX = 0,
+        UART1_RTS,
+
+        /* UART2 (COM_UART_GATING)*/
+        UART2_TX,
+        UART2_RX,
+        UART2_CTS,
+        UART2_RTS,
+
+        /* UART3 (GIGA_UART_GATING) */
+        UART3_TX,
+        UART3_RX,
+        UART3_CTS,
+        UART3_RTS,
+        UART3_CLKREQ,
+        UART3_BCLK,     /* 12MHz clock out */
+        Y15_1610_UART3_RTS,
+
+        /* PWT & PWL */
+        PWT,
+        PWL,
+
+        /* USB master generic */
+        R18_USB_VBUS,
+        R18_1510_USB_GPIO0,
+        W4_USB_PUEN,
+        W4_USB_CLKO,
+        W4_USB_HIGHZ,
+        W4_GPIO58,
+
+        /* USB1 master */
+        USB1_SUSP,
+        USB1_SEO,
+        W13_1610_USB1_SE0,
+        USB1_TXEN,
+        USB1_TXD,
+        USB1_VP,
+        USB1_VM,
+        USB1_RCV,
+        USB1_SPEED,
+        R13_1610_USB1_SPEED,
+        R13_1710_USB1_SE0,
+
+        /* USB2 master */
+        USB2_SUSP,
+        USB2_VP,
+        USB2_TXEN,
+        USB2_VM,
+        USB2_RCV,
+        USB2_SEO,
+        USB2_TXD,
+
+        /* OMAP-1510 GPIO */
+        R18_1510_GPIO0,
+        R19_1510_GPIO1,
+        M14_1510_GPIO2,
+
+        /* OMAP1610 GPIO */
+        P18_1610_GPIO3,
+        Y15_1610_GPIO17,
+
+        /* OMAP-1710 GPIO */
+        R18_1710_GPIO0,
+        V2_1710_GPIO10,
+        N21_1710_GPIO14,
+        W15_1710_GPIO40,
+
+        /* MPUIO */
+        MPUIO2,
+        N15_1610_MPUIO2,
+        MPUIO4,
+        MPUIO5,
+        T20_1610_MPUIO5,
+        W11_1610_MPUIO6,
+        V10_1610_MPUIO7,
+        W11_1610_MPUIO9,
+        V10_1610_MPUIO10,
+        W10_1610_MPUIO11,
+        E20_1610_MPUIO13,
+        U20_1610_MPUIO14,
+        E19_1610_MPUIO15,
+
+        /* MCBSP2 */
+        MCBSP2_CLKR,
+        MCBSP2_CLKX,
+        MCBSP2_DR,
+        MCBSP2_DX,
+        MCBSP2_FSR,
+        MCBSP2_FSX,
+
+        /* MCBSP3 */
+        MCBSP3_CLKX,
+
+        /* Misc ballouts */
+        BALLOUT_V8_ARMIO3,
+        N20_HDQ,
+
+        /* OMAP-1610 MMC2 */
+        W8_1610_MMC2_DAT0,
+        V8_1610_MMC2_DAT1,
+        W15_1610_MMC2_DAT2,
+        R10_1610_MMC2_DAT3,
+        Y10_1610_MMC2_CLK,
+        Y8_1610_MMC2_CMD,
+        V9_1610_MMC2_CMDDIR,
+        V5_1610_MMC2_DATDIR0,
+        W19_1610_MMC2_DATDIR1,
+        R18_1610_MMC2_CLKIN,
+
+        /* OMAP-1610 External Trace Interface */
+        M19_1610_ETM_PSTAT0,
+        L15_1610_ETM_PSTAT1,
+        L18_1610_ETM_PSTAT2,
+        L19_1610_ETM_D0,
+        J19_1610_ETM_D6,
+        J18_1610_ETM_D7,
+
+        /* OMAP16XX GPIO */
+        P20_1610_GPIO4,
+        V9_1610_GPIO7,
+        W8_1610_GPIO9,
+        N20_1610_GPIO11,
+        N19_1610_GPIO13,
+        P10_1610_GPIO22,
+        V5_1610_GPIO24,
+        AA20_1610_GPIO_41,
+        W19_1610_GPIO48,
+        M7_1610_GPIO62,
+        V14_16XX_GPIO37,
+        R9_16XX_GPIO18,
+        L14_16XX_GPIO49,
+
+        /* OMAP-1610 uWire */
+        V19_1610_UWIRE_SCLK,
+        U18_1610_UWIRE_SDI,
+        W21_1610_UWIRE_SDO,
+        N14_1610_UWIRE_CS0,
+        P15_1610_UWIRE_CS3,
+        N15_1610_UWIRE_CS1,
+
+        /* OMAP-1610 SPI */
+        U19_1610_SPIF_SCK,
+        U18_1610_SPIF_DIN,
+        P20_1610_SPIF_DIN,
+        W21_1610_SPIF_DOUT,
+        R18_1610_SPIF_DOUT,
+        N14_1610_SPIF_CS0,
+        N15_1610_SPIF_CS1,
+        T19_1610_SPIF_CS2,
+        P15_1610_SPIF_CS3,
+
+        /* OMAP-1610 Flash */
+        L3_1610_FLASH_CS2B_OE,
+        M8_1610_FLASH_CS2B_WE,
+
+        /* First MMC */
+        MMC_CMD,
+        MMC_DAT1,
+        MMC_DAT2,
+        MMC_DAT0,
+        MMC_CLK,
+        MMC_DAT3,
+
+        /* OMAP-1710 MMC CMDDIR and DATDIR0 */
+        M15_1710_MMC_CLKI,
+        P19_1710_MMC_CMDDIR,
+        P20_1710_MMC_DATDIR0,
+
+        /* OMAP-1610 USB0 alternate pin configuration */
+        W9_USB0_TXEN,
+        AA9_USB0_VP,
+        Y5_USB0_RCV,
+        R9_USB0_VM,
+        V6_USB0_TXD,
+        W5_USB0_SE0,
+        V9_USB0_SPEED,
+        V9_USB0_SUSP,
+
+        /* USB2 */
+        W9_USB2_TXEN,
+        AA9_USB2_VP,
+        Y5_USB2_RCV,
+        R9_USB2_VM,
+        V6_USB2_TXD,
+        W5_USB2_SE0,
+
+        /* 16XX UART */
+        R13_1610_UART1_TX,
+        V14_16XX_UART1_RX,
+        R14_1610_UART1_CTS,
+        AA15_1610_UART1_RTS,
+        R9_16XX_UART2_RX,
+        L14_16XX_UART3_RX,
+
+        /* I2C OMAP-1610 */
+        I2C_SCL,
+        I2C_SDA,
+
+        /* Keypad */
+        F18_1610_KBC0,
+        D20_1610_KBC1,
+        D19_1610_KBC2,
+        E18_1610_KBC3,
+        C21_1610_KBC4,
+        G18_1610_KBR0,
+        F19_1610_KBR1,
+        H14_1610_KBR2,
+        E20_1610_KBR3,
+        E19_1610_KBR4,
+        N19_1610_KBR5,
+
+        /* Power management */
+        T20_1610_LOW_PWR,
+
+        /* MCLK Settings */
+        V5_1710_MCLK_ON,
+        V5_1710_MCLK_OFF,
+        R10_1610_MCLK_ON,
+        R10_1610_MCLK_OFF,
+
+        /* CompactFlash controller */
+        P11_1610_CF_CD2,
+        R11_1610_CF_IOIS16,
+        V10_1610_CF_IREQ,
+        W10_1610_CF_RESET,
+        W11_1610_CF_CD1,
+
+        /* parallel camera */
+        J15_1610_CAM_LCLK,
+        J18_1610_CAM_D7,
+        J19_1610_CAM_D6,
+        J14_1610_CAM_D5,
+        K18_1610_CAM_D4,
+        K19_1610_CAM_D3,
+        K15_1610_CAM_D2,
+        K14_1610_CAM_D1,
+        L19_1610_CAM_D0,
+        L18_1610_CAM_VS,
+        L15_1610_CAM_HS,
+        M19_1610_CAM_RSTZ,
+        Y15_1610_CAM_OUTCLK,
+
+        /* serial camera */
+        H19_1610_CAM_EXCLK,
+        Y12_1610_CCP_CLKP,
+        W13_1610_CCP_CLKM,
+        W14_1610_CCP_DATAP,
+        Y14_1610_CCP_DATAM,
+
+};
+
+struct omap_mux_cfg {
+        struct pin_config       *pins;
+        unsigned long           size;
+        int                     (*cfg_reg)(const struct pin_config *cfg);
+};
+
+#ifdef  CONFIG_OMAP_MUX
+/* setup pin muxing in Linux */
+extern int omap1_mux_init(void);
+extern int omap_mux_register(struct omap_mux_cfg *);
+extern int omap_cfg_reg(unsigned long reg_cfg);
+#else
+/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
+static inline int omap1_mux_init(void) { return 0; }
+static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
+#endif
+
+extern int omap2_mux_init(void);
+
+#endif
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 6c95a59f0f16..6a5baab1f4cb 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -16,7 +16,7 @@
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/tc.h>
 #include <plat/dma.h>
 
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
index 7b1a3833165d..4071479f7106 100644
--- a/arch/arm/mach-omap1/leds.c
+++ b/arch/arm/mach-omap1/leds.c
@@ -11,7 +11,7 @@
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index cf2ed9ef1351..bdc2e7541adb 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -20,7 +20,7 @@
 #include <linux/slab.h>
 
 #include <plat/dma.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/cpu.h>
 #include <linux/platform_data/asoc-ti-mcbsp.h>
 
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index e9cc52d4cb28..667ce5027f63 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -29,7 +29,7 @@
 
 #include <mach/hardware.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
@@ -451,6 +451,56 @@ static int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
 #endif
 }
 
+static struct omap_mux_cfg *mux_cfg;
+
+int __init omap_mux_register(struct omap_mux_cfg *arch_mux_cfg)
+{
+        if (!arch_mux_cfg || !arch_mux_cfg->pins || arch_mux_cfg->size == 0
+                        || !arch_mux_cfg->cfg_reg) {
+                printk(KERN_ERR "Invalid pin table\n");
+                return -EINVAL;
+        }
+
+        mux_cfg = arch_mux_cfg;
+
+        return 0;
+}
+
+/*
+ * Sets the Omap MUX and PULL_DWN registers based on the table
+ */
+int __init_or_module omap_cfg_reg(const unsigned long index)
+{
+        struct pin_config *reg;
+
+        if (!cpu_class_is_omap1()) {
+                printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n",
+                                index);
+                WARN_ON(1);
+                return -EINVAL;
+        }
+
+        if (mux_cfg == NULL) {
+                printk(KERN_ERR "Pin mux table not initialized\n");
+                return -ENODEV;
+        }
+
+        if (index >= mux_cfg->size) {
+                printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
+                       index, mux_cfg->size);
+                dump_stack();
+                return -ENODEV;
+        }
+
+        reg = &mux_cfg->pins[index];
+
+        if (!mux_cfg->cfg_reg)
+                return -ENODEV;
+
+        return mux_cfg->cfg_reg(reg);
+}
+EXPORT_SYMBOL(omap_cfg_reg);
+
 int __init omap1_mux_init(void)
 {
         if (cpu_is_omap7xx()) {
@@ -468,4 +518,8 @@ int __init omap1_mux_init(void)
         return omap_mux_register(&arch_mux_cfg);
 }
 
-#endif
+#else
+#define omap_mux_init() do {} while(0)
+#define omap_cfg_reg(x) do {} while(0)
+#endif  /* CONFIG_OMAP_MUX */
+
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index b2560d32b3a0..47ec16155483 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -53,7 +53,7 @@
 #include <plat/clock.h>
 #include <plat/sram.h>
 #include <plat/tc.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/dma.h>
 #include <plat/dmtimer.h>
 
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 0d1709b1a6fe..b9d6834af835 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -22,7 +22,7 @@
 
 #include <asm/mach-types.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/fpga.h>
 
 #include "pm.h"
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index 65f88176fba8..84267edd9421 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -26,7 +26,7 @@
 
 #include <asm/irq.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 
 #include <mach/usb.h>