ARM: OMAP: Remove old dead gpio expander code

This should be done with GPIO calls. Patches against the
mainline tree welcome to add the necessary working functionality
back.

Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 0 insertions, 101 deletions

diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 4695965114c4..f597968733b4 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -39,12 +39,10 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/gpioexpander.h>
 #include <mach/irqs.h>
 #include <mach/mux.h>
 #include <mach/tc.h>
 #include <mach/nand.h>
-#include <mach/irda.h>
 #include <mach/usb.h>
 #include <mach/keypad.h>
 #include <mach/dma.h>
@@ -276,104 +274,6 @@ static struct platform_device h3_kp_device = {
         .resource       = h3_kp_resources,
 };
 
-
-/* Select between the IrDA and aGPS module
- */
-static int h3_select_irda(struct device *dev, int state)
-{
-        unsigned char expa;
-        int err = 0;
-
-        if ((err = read_gpio_expa(&expa, 0x26))) {
-                printk(KERN_ERR "Error reading from I/O EXPANDER \n");
-                return err;
-        }
-
-        /* 'P6' enable/disable IRDA_TX and IRDA_RX */
-        if (state & IR_SEL) { /* IrDA */
-                if ((err = write_gpio_expa(expa | 0x40, 0x26))) {
-                        printk(KERN_ERR "Error writing to I/O EXPANDER \n");
-                        return err;
-                }
-        } else {
-                if ((err = write_gpio_expa(expa & ~0x40, 0x26))) {
-                        printk(KERN_ERR "Error writing to I/O EXPANDER \n");
-                        return err;
-                }
-        }
-        return err;
-}
-
-static void set_trans_mode(struct work_struct *work)
-{
-        struct omap_irda_config *irda_config =
-                container_of(work, struct omap_irda_config, gpio_expa.work);
-        int mode = irda_config->mode;
-        unsigned char expa;
-        int err = 0;
-
-        if ((err = read_gpio_expa(&expa, 0x27)) != 0) {
-                printk(KERN_ERR "Error reading from I/O expander\n");
-        }
-
-        expa &= ~0x03;
-
-        if (mode & IR_SIRMODE) {
-                expa |= 0x01;
-        } else { /* MIR/FIR */
-                expa |= 0x03;
-        }
-
-        if ((err = write_gpio_expa(expa, 0x27)) != 0) {
-                printk(KERN_ERR "Error writing to I/O expander\n");
-        }
-}
-
-static int h3_transceiver_mode(struct device *dev, int mode)
-{
-        struct omap_irda_config *irda_config = dev->platform_data;
-
-        irda_config->mode = mode;
-        cancel_delayed_work(&irda_config->gpio_expa);
-        PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode);
-        schedule_delayed_work(&irda_config->gpio_expa, 0);
-
-        return 0;
-}
-
-static struct omap_irda_config h3_irda_data = {
-        .transceiver_cap        = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
-        .transceiver_mode       = h3_transceiver_mode,
-        .select_irda            = h3_select_irda,
-        .rx_channel             = OMAP_DMA_UART3_RX,
-        .tx_channel             = OMAP_DMA_UART3_TX,
-        .dest_start             = UART3_THR,
-        .src_start              = UART3_RHR,
-        .tx_trigger             = 0,
-        .rx_trigger             = 0,
-};
-
-static struct resource h3_irda_resources[] = {
-        [0] = {
-                .start  = INT_UART3,
-                .end    = INT_UART3,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-
-static u64 irda_dmamask = 0xffffffff;
-
-static struct platform_device h3_irda_device = {
-        .name           = "omapirda",
-        .id             = 0,
-        .dev            = {
-                .platform_data  = &h3_irda_data,
-                .dma_mask       = &irda_dmamask,
-        },
-        .num_resources  = ARRAY_SIZE(h3_irda_resources),
-        .resource       = h3_irda_resources,
-};
-
 static struct platform_device h3_lcd_device = {
         .name           = "lcd_h3",
         .id             = -1,
@@ -395,7 +295,6 @@ static struct platform_device *devices[] __initdata = {
         &nand_device,
         &smc91x_device,
         &intlat_device,
-        &h3_irda_device,
         &h3_kp_device,
         &h3_lcd_device,
 };