ARM: i.MX51: Remove _MX51_PAD_xxx references

Use new macro NEW_PAD_CTRL to remove _MX51_PAD_xxx references.
A later patch will remove the _MX51_PAD_xxx symbols.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

3 files changed, 5 insertions, 5 deletions

diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
index ff096d587299..040c5c376a8c 100644
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -108,7 +108,7 @@ static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = {
 
         /* Touchscreen */
         /* IRQ */
-        _MX51_PAD_GPIO_NAND__GPIO_NAND | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+        NEW_PAD_CTRL(MX51_PAD_GPIO_NAND__GPIO_NAND, PAD_CTL_PUS_22K_UP |
                         PAD_CTL_PKE | PAD_CTL_SRE_FAST |
                         PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
 };
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 11b0ff67f89d..ff365970e2e5 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -357,8 +357,8 @@ static const struct esdhc_platform_data mx51_babbage_sd2_data __initconst = {
 static void __init mx51_babbage_init(void)
 {
         iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
-        iomux_v3_cfg_t power_key = _MX51_PAD_EIM_A27__GPIO2_21 |
-                MUX_PAD_CTRL(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
+        iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21,
+                PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
 
         imx51_soc_init();
 
diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
index 261923997643..f046d4b70afb 100644
--- a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
@@ -47,7 +47,7 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
         /* LED */
         MX51_PAD_NANDF_D10__GPIO3_30,
         /* SWITCH */
-        _MX51_PAD_NANDF_D9__GPIO3_31 | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+        NEW_PAD_CTRL(MX51_PAD_NANDF_D9__GPIO3_31, PAD_CTL_PUS_22K_UP |
                         PAD_CTL_PKE | PAD_CTL_SRE_FAST |
                         PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
         /* UART2 */
@@ -66,7 +66,7 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
         MX51_PAD_SD1_DATA2__SD1_DATA2,
         MX51_PAD_SD1_DATA3__SD1_DATA3,
         /* SD1 CD */
-        _MX51_PAD_GPIO1_0__SD1_CD | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+        NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_PUS_22K_UP |
                         PAD_CTL_PKE | PAD_CTL_SRE_FAST |
                         PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
 };