i.MX51: handle IRQ for gpio 16..31

The i.MX51 generates 2 IRQ for each GPIO bank : one for gpio 0 to 15
and one for gpio 16 to 31.
Actually only the lower IRQ is registered so register the second one.

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 4 insertions, 0 deletions

diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
index aafa61c6cec5..1920ff4963b2 100644
--- a/arch/arm/mach-mx5/devices.c
+++ b/arch/arm/mach-mx5/devices.c
@@ -250,24 +250,28 @@ static struct mxc_gpio_port mxc_gpio_ports[] = {
                 .chip.label = "gpio-0",
                 .base = MX51_IO_ADDRESS(MX51_GPIO1_BASE_ADDR),
                 .irq = MX51_MXC_INT_GPIO1_LOW,
+                .irq_high = MX51_MXC_INT_GPIO1_HIGH,
                 .virtual_irq_start = MXC_GPIO_IRQ_START
         },
         {
                 .chip.label = "gpio-1",
                 .base = MX51_IO_ADDRESS(MX51_GPIO2_BASE_ADDR),
                 .irq = MX51_MXC_INT_GPIO2_LOW,
+                .irq_high = MX51_MXC_INT_GPIO2_HIGH,
                 .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 1
         },
         {
                 .chip.label = "gpio-2",
                 .base = MX51_IO_ADDRESS(MX51_GPIO3_BASE_ADDR),
                 .irq = MX51_MXC_INT_GPIO3_LOW,
+                .irq_high = MX51_MXC_INT_GPIO3_HIGH,
                 .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 2
         },
         {
                 .chip.label = "gpio-3",
                 .base = MX51_IO_ADDRESS(MX51_GPIO4_BASE_ADDR),
                 .irq = MX51_MXC_INT_GPIO4_LOW,
+                .irq_high = MX51_MXC_INT_GPIO4_HIGH,
                 .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 3
         },
 };