ARM: imx: move mx25 support to mach-imx

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

1 files changed, 0 insertions, 161 deletions

diff --git a/arch/arm/mach-mx25/mach-cpuimx25.c b/arch/arm/mach-mx25/mach-cpuimx25.c
deleted file mode 100644
index 67a7d55ad191..000000000000
--- a/arch/arm/mach-mx25/mach-cpuimx25.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
- * Copyright 2010 Eric Bénard - Eukréa Electromatique, <eric@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <mach/eukrea-baseboards.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/mx25.h>
-#include <mach/mxc_nand.h>
-#include <mach/imxfb.h>
-#include <mach/iomux-mx25.h>
-
-#include "devices-imx25.h"
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-        .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct pad_desc eukrea_cpuimx25_pads[] = {
-        /* FEC - RMII */
-        MX25_PAD_FEC_MDC__FEC_MDC,
-        MX25_PAD_FEC_MDIO__FEC_MDIO,
-        MX25_PAD_FEC_TDATA0__FEC_TDATA0,
-        MX25_PAD_FEC_TDATA1__FEC_TDATA1,
-        MX25_PAD_FEC_TX_EN__FEC_TX_EN,
-        MX25_PAD_FEC_RDATA0__FEC_RDATA0,
-        MX25_PAD_FEC_RDATA1__FEC_RDATA1,
-        MX25_PAD_FEC_RX_DV__FEC_RX_DV,
-        MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
-        /* I2C1 */
-        MX25_PAD_I2C1_CLK__I2C1_CLK,
-        MX25_PAD_I2C1_DAT__I2C1_DAT,
-};
-
-static const struct fec_platform_data mx25_fec_pdata __initconst = {
-        .phy    = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct mxc_nand_platform_data
-eukrea_cpuimx25_nand_board_info __initconst = {
-        .width          = 1,
-        .hw_ecc         = 1,
-        .flash_bbt      = 1,
-};
-
-static const struct imxi2c_platform_data
-eukrea_cpuimx25_i2c0_data __initconst = {
-        .bitrate = 100000,
-};
-
-static struct i2c_board_info eukrea_cpuimx25_i2c_devices[] = {
-        {
-                I2C_BOARD_INFO("pcf8563", 0x51),
-        },
-};
-
-static const struct mxc_usbh_platform_data otg_pdata __initconst = {
-        .portsc = MXC_EHCI_MODE_UTMI,
-        .flags  = MXC_EHCI_INTERFACE_DIFF_UNI,
-};
-
-static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
-        .portsc = MXC_EHCI_MODE_SERIAL,
-        .flags  = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
-                  MXC_EHCI_IPPUE_DOWN,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
-        .operating_mode = FSL_USB2_DR_DEVICE,
-        .phy_mode       = FSL_USB2_PHY_UTMI,
-};
-
-static int otg_mode_host;
-
-static int __init eukrea_cpuimx25_otg_mode(char *options)
-{
-        if (!strcmp(options, "host"))
-                otg_mode_host = 1;
-        else if (!strcmp(options, "device"))
-                otg_mode_host = 0;
-        else
-                pr_info("otg_mode neither \"host\" nor \"device\". "
-                        "Defaulting to device\n");
-        return 0;
-}
-__setup("otg_mode=", eukrea_cpuimx25_otg_mode);
-
-static void __init eukrea_cpuimx25_init(void)
-{
-        if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads,
-                        ARRAY_SIZE(eukrea_cpuimx25_pads)))
-                printk(KERN_ERR "error setting cpuimx25 pads !\n");
-
-        imx25_add_imx_uart0(&uart_pdata);
-        imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info);
-        imx25_add_imxdi_rtc(NULL);
-        imx25_add_fec(&mx25_fec_pdata);
-
-        i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices,
-                                ARRAY_SIZE(eukrea_cpuimx25_i2c_devices));
-        imx25_add_imx_i2c0(&eukrea_cpuimx25_i2c0_data);
-
-        if (otg_mode_host)
-                imx25_add_mxc_ehci_otg(&otg_pdata);
-        else
-                imx25_add_fsl_usb2_udc(&otg_device_pdata);
-
-        imx25_add_mxc_ehci_hs(&usbh2_pdata);
-
-#ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD
-        eukrea_mbimxsd25_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx25_timer_init(void)
-{
-        mx25_clocks_init();
-}
-
-static struct sys_timer eukrea_cpuimx25_timer = {
-        .init   = eukrea_cpuimx25_timer_init,
-};
-
-MACHINE_START(EUKREA_CPUIMX25, "Eukrea CPUIMX25")
-        /* Maintainer: Eukrea Electromatique */
-        .boot_params    = MX25_PHYS_OFFSET + 0x100,
-        .map_io         = mx25_map_io,
-        .init_irq       = mx25_init_irq,
-        .init_machine   = eukrea_cpuimx25_init,
-        .timer          = &eukrea_cpuimx25_timer,
-MACHINE_END