Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (422 commits)
  [ARM] 5435/1: fix compile warning in sanity_check_meminfo()
  [ARM] 5434/1: ARM: OMAP: Fix mailbox compile for 24xx
  [ARM] pxa: fix the bad assumption that PCMCIA sockets always start with 0
  [ARM] pxa: fix Colibri PXA300 and PXA320 LCD backlight pins
  imxfb: Fix TFT mode
  i.MX21/27: remove ifdef CONFIG_FB_IMX
  imxfb: add clock support
  mxc: add arch_reset() function
  clkdev: add possibility to get a clock based on the device name
  i.MX1: remove fb support from mach-imx
  [ARM] pxa: build arch/arm/plat-pxa/mfp.c only when PXA3xx or ARCH_MMP defined
  Gemini: Add support for Teltonika RUT100
  Gemini: gpiolib based GPIO support v2
  MAINTAINERS: add myself as Gemini architecture maintainer
  ARM: Add Gemini architecture v3
  [ARM] OMAP: Fix compile for omap2_init_common_hw()
  MAINTAINERS: Add myself as Faraday ARM core variant maintainer
  ARM: Add support for FA526 v2
  [ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h
  [ARM] collie: fix two minor formatting nits
  ...

6 files changed, 242 insertions, 37 deletions

diff --git a/arch/arm/mach-mx1/Kconfig b/arch/arm/mach-mx1/Kconfig
index 2b59fc74784f..eb7660f5d4b7 100644
--- a/arch/arm/mach-mx1/Kconfig
+++ b/arch/arm/mach-mx1/Kconfig
@@ -1,6 +1,6 @@
 if ARCH_MX1
 
-comment "MX1 Platforms"
+comment "MX1 platforms:"
 
 config MACH_MXLADS
         bool
@@ -11,4 +11,9 @@ config ARCH_MX1ADS
         help
           Say Y here if you are using Motorola MX1ADS/MXLADS boards
 
+config MACH_SCB9328
+        bool "Synertronixx scb9328"
+        help
+          Say Y here if you are using a Synertronixx scb9328 board
+
 endif
diff --git a/arch/arm/mach-mx1/Makefile b/arch/arm/mach-mx1/Makefile
index b969719011fa..82f1309568ef 100644
--- a/arch/arm/mach-mx1/Makefile
+++ b/arch/arm/mach-mx1/Makefile
@@ -8,3 +8,4 @@ obj-y			+= generic.o clock.o devices.o
 
 # Specific board support
 obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o
+obj-$(CONFIG_MACH_SCB9328) += scb9328.o
\ No newline at end of file
diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-mx1/clock.c
index 4bcd1ece55f5..0d0f306851d0 100644
--- a/arch/arm/mach-mx1/clock.c
+++ b/arch/arm/mach-mx1/clock.c
@@ -25,6 +25,7 @@
 
 #include <mach/clock.h>
 #include <mach/hardware.h>
+#include <mach/common.h>
 #include "crm_regs.h"
 
 static int _clk_enable(struct clk *clk)
@@ -87,33 +88,6 @@ static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
         return clk->parent->set_rate(clk->parent, rate);
 }
 
-/*
- *  get the system pll clock in Hz
- *
- *                  mfi + mfn / (mfd +1)
- *  f = 2 * f_ref * --------------------
- *                        pd + 1
- */
-static unsigned long mx1_decode_pll(unsigned int pll, u32 f_ref)
-{
-        unsigned long long ll;
-        unsigned long quot;
-
-        u32 mfi = (pll >> 10) & 0xf;
-        u32 mfn = pll & 0x3ff;
-        u32 mfd = (pll >> 16) & 0x3ff;
-        u32 pd =  (pll >> 26) & 0xf;
-
-        mfi = mfi <= 5 ? 5 : mfi;
-
-        ll = 2 * (unsigned long long)f_ref *
-                ((mfi << 16) + (mfn << 16) / (mfd + 1));
-        quot = (pd + 1) * (1 << 16);
-        ll += quot / 2;
-        do_div(ll, quot);
-        return (unsigned long)ll;
-}
-
 static unsigned long clk16m_get_rate(struct clk *clk)
 {
         return 16000000;
@@ -188,7 +162,7 @@ static struct clk prem_clk = {
 
 static unsigned long system_clk_get_rate(struct clk *clk)
 {
-        return mx1_decode_pll(__raw_readl(CCM_SPCTL0),
+        return mxc_decode_pll(__raw_readl(CCM_SPCTL0),
                               clk_get_rate(clk->parent));
 }
 
@@ -200,7 +174,7 @@ static struct clk system_clk = {
 
 static unsigned long mcu_clk_get_rate(struct clk *clk)
 {
-        return mx1_decode_pll(__raw_readl(CCM_MPCTL0),
+        return mxc_decode_pll(__raw_readl(CCM_MPCTL0),
                               clk_get_rate(clk->parent));
 }
 
@@ -488,7 +462,7 @@ static struct clk clko_clk = {
 };
 
 static struct clk dma_clk = {
-        .name = "dma_clk",
+        .name = "dma",
         .parent = &hclk,
         .round_rate = _clk_parent_round_rate,
         .set_rate = _clk_parent_set_rate,
@@ -539,7 +513,7 @@ static struct clk gpt_clk = {
 };
 
 static struct clk uart_clk = {
-        .name = "uart_clk",
+        .name = "uart",
         .parent = &perclk[0],
         .round_rate = _clk_parent_round_rate,
         .set_rate = _clk_parent_set_rate,
@@ -621,7 +595,7 @@ static struct clk *mxc_clks[] = {
         &rtc_clk,
 };
 
-int __init mxc_clocks_init(unsigned long fref)
+int __init mx1_clocks_init(unsigned long fref)
 {
         struct clk **clkp;
         unsigned int reg;
@@ -652,5 +626,7 @@ int __init mxc_clocks_init(unsigned long fref)
         clk_enable(&hclk);
         clk_enable(&fclk);
 
+        mxc_timer_init(&gpt_clk);
+
         return 0;
 }
diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c
index a95644193f3f..97f42d96d7a1 100644
--- a/arch/arm/mach-mx1/devices.c
+++ b/arch/arm/mach-mx1/devices.c
@@ -23,10 +23,11 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-
 #include <mach/irqs.h>
 #include <mach/hardware.h>
 
+#include "devices.h"
+
 static struct resource imx_csi_resources[] = {
         [0] = {
                 .start  = 0x00224000,
diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
index 3200cf60e384..7ae229bc1b79 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mx1ads.c
@@ -16,6 +16,8 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pcf857x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -25,7 +27,11 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/imx-uart.h>
-#include <mach/iomux-mx1-mx2.h>
+#include <mach/irqs.h>
+#ifdef CONFIG_I2C_IMX
+#include <mach/i2c.h>
+#endif
+#include <mach/iomux.h>
 #include "devices.h"
 
 /*
@@ -105,6 +111,55 @@ static struct platform_device flash_device = {
 };
 
 /*
+ * I2C
+ */
+
+#ifdef CONFIG_I2C_IMX
+static int i2c_pins[] = {
+        PA15_PF_I2C_SDA,
+        PA16_PF_I2C_SCL,
+};
+
+static int i2c_init(struct device *dev)
+{
+        return mxc_gpio_setup_multiple_pins(i2c_pins,
+                        ARRAY_SIZE(i2c_pins), "I2C");
+}
+
+static void i2c_exit(struct device *dev)
+{
+        mxc_gpio_release_multiple_pins(i2c_pins,
+                        ARRAY_SIZE(i2c_pins));
+}
+
+static struct pcf857x_platform_data pcf857x_data[] = {
+        {
+                .gpio_base = 4 * 32,
+        }, {
+                .gpio_base = 4 * 32 + 16,
+        }
+};
+
+static struct imxi2c_platform_data mx1ads_i2c_data = {
+        .bitrate = 100000,
+        .init = i2c_init,
+        .exit = i2c_exit,
+};
+
+static struct i2c_board_info mx1ads_i2c_devices[] = {
+        {
+                I2C_BOARD_INFO("pcf857x", 0x22),
+                .type = "pcf8575",
+                .platform_data = &pcf857x_data[0],
+        }, {
+                I2C_BOARD_INFO("pcf857x", 0x24),
+                .type = "pcf8575",
+                .platform_data = &pcf857x_data[1],
+        },
+};
+#endif
+
+/*
  * Board init
  */
 static void __init mx1ads_init(void)
@@ -115,12 +170,19 @@ static void __init mx1ads_init(void)
 
         /* Physmap flash */
         mxc_register_device(&flash_device, &mx1ads_flash_data);
+
+        /* I2C */
+#ifdef CONFIG_I2C_IMX
+        i2c_register_board_info(0, mx1ads_i2c_devices,
+                                ARRAY_SIZE(mx1ads_i2c_devices));
+
+        mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data);
+#endif
 }
 
 static void __init mx1ads_timer_init(void)
 {
-        mxc_clocks_init(32000);
-        mxc_timer_init("gpt_clk");
+        mx1_clocks_init(32000);
 }
 
 struct sys_timer mx1ads_timer = {
diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/scb9328.c
new file mode 100644
index 000000000000..0e71f3fa28bf
--- /dev/null
+++ b/arch/arm/mach-mx1/scb9328.c
@@ -0,0 +1,160 @@
+/*
+ * linux/arch/arm/mach-mx1/scb9328.c
+ *
+ * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
+ * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/interrupt.h>
+#include <linux/dm9000.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+
+#include "devices.h"
+
+/*
+ * This scb9328 has a 32MiB flash
+ */
+static struct resource flash_resource = {
+        .start  = IMX_CS0_PHYS,
+        .end    = IMX_CS0_PHYS + (32 * 1024 * 1024) - 1,
+        .flags  = IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data scb_flash_data = {
+        .width  = 2,
+};
+
+static struct platform_device scb_flash_device = {
+        .name           = "physmap-flash",
+        .id             = 0,
+        .dev = {
+                .platform_data = &scb_flash_data,
+        },
+        .resource = &flash_resource,
+        .num_resources = 1,
+};
+
+/*
+ * scb9328 has a DM9000 network controller
+ * connected to CS5, with 16 bit data path
+ * and interrupt connected to GPIO 3
+ */
+
+/*
+ * internal datapath is fixed 16 bit
+ */
+static struct dm9000_plat_data dm9000_platdata = {
+        .flags  = DM9000_PLATF_16BITONLY,
+};
+
+/*
+ * the DM9000 drivers wants two defined address spaces
+ * to gain access to address latch registers and the data path.
+ */
+static struct resource dm9000x_resources[] = {
+        [0] = {
+                .name   = "address area",
+                .start  = IMX_CS5_PHYS,
+                .end    = IMX_CS5_PHYS + 1,
+                .flags  = IORESOURCE_MEM        /* address access */
+        },
+        [1] = {
+                .name   = "data area",
+                .start  = IMX_CS5_PHYS + 4,
+                .end    = IMX_CS5_PHYS + 5,
+                .flags  = IORESOURCE_MEM        /* data access */
+        },
+        [2] = {
+                .start  = IRQ_GPIOC(3),
+                .end    = IRQ_GPIOC(3),
+                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL
+        },
+};
+
+static struct platform_device dm9000x_device = {
+        .name           = "dm9000",
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(dm9000x_resources),
+        .resource       = dm9000x_resources,
+        .dev            = {
+                .platform_data = &dm9000_platdata,
+        }
+};
+
+static int mxc_uart1_pins[] = {
+        PC9_PF_UART1_CTS,
+        PC10_PF_UART1_RTS,
+        PC11_PF_UART1_TXD,
+        PC12_PF_UART1_RXD,
+};
+
+static int uart1_mxc_init(struct platform_device *pdev)
+{
+        return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
+                        ARRAY_SIZE(mxc_uart1_pins), "UART1");
+}
+
+static int uart1_mxc_exit(struct platform_device *pdev)
+{
+        mxc_gpio_release_multiple_pins(mxc_uart1_pins,
+                        ARRAY_SIZE(mxc_uart1_pins));
+        return 0;
+}
+
+static struct imxuart_platform_data uart_pdata = {
+        .init = uart1_mxc_init,
+        .exit = uart1_mxc_exit,
+        .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+        &scb_flash_device,
+        &dm9000x_device,
+};
+
+/*
+ * scb9328_init - Init the CPU card itself
+ */
+static void __init scb9328_init(void)
+{
+        mxc_register_device(&imx_uart1_device, &uart_pdata);
+
+        printk(KERN_INFO"Scb9328: Adding devices\n");
+        platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init scb9328_timer_init(void)
+{
+        mx1_clocks_init(32000);
+}
+
+static struct sys_timer scb9328_timer = {
+        .init   = scb9328_timer_init,
+};
+
+MACHINE_START(SCB9328, "Synertronixx scb9328")
+    /* Sascha Hauer */
+        .phys_io        = 0x00200000,
+        .io_pg_offst    = ((0xe0200000) >> 18) & 0xfffc,
+        .boot_params    = 0x08000100,
+        .map_io         = mxc_map_io,
+        .init_irq       = mxc_init_irq,
+        .timer          = &scb9328_timer,
+        .init_machine   = scb9328_init,
+MACHINE_END