aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-ks8695
diff options
context:
space:
mode:
authorRussell King <rmk@dyn-67.arm.linux.org.uk>2008-08-05 11:14:15 -0400
committerRussell King <rmk+kernel@arm.linux.org.uk>2008-08-07 04:55:48 -0400
commita09e64fbc0094e3073dbb09c3b4bfe4ab669244b (patch)
tree69689f467179891b498bd7423fcf61925173db31 /arch/arm/mach-ks8695
parenta1b81a84fff05dbfef45b7012c26e1fee9973e5d (diff)
[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm/mach-ks8695')
-rw-r--r--arch/arm/mach-ks8695/board-micrel.c2
-rw-r--r--arch/arm/mach-ks8695/cpu.c6
-rw-r--r--arch/arm/mach-ks8695/devices.c6
-rw-r--r--arch/arm/mach-ks8695/gpio.c6
-rw-r--r--arch/arm/mach-ks8695/include/mach/debug-macro.S38
-rw-r--r--arch/arm/mach-ks8695/include/mach/devices.h37
-rw-r--r--arch/arm/mach-ks8695/include/mach/dma.h17
-rw-r--r--arch/arm/mach-ks8695/include/mach/entry-macro.S53
-rw-r--r--arch/arm/mach-ks8695/include/mach/gpio.h79
-rw-r--r--arch/arm/mach-ks8695/include/mach/hardware.h49
-rw-r--r--arch/arm/mach-ks8695/include/mach/io.h19
-rw-r--r--arch/arm/mach-ks8695/include/mach/irqs.h54
-rw-r--r--arch/arm/mach-ks8695/include/mach/memory.h49
-rw-r--r--arch/arm/mach-ks8695/include/mach/regs-gpio.h55
-rw-r--r--arch/arm/mach-ks8695/include/mach/regs-hpna.h25
-rw-r--r--arch/arm/mach-ks8695/include/mach/regs-irq.h41
-rw-r--r--arch/arm/mach-ks8695/include/mach/regs-lan.h65
-rw-r--r--arch/arm/mach-ks8695/include/mach/regs-mem.h89
-rw-r--r--arch/arm/mach-ks8695/include/mach/regs-misc.h97
-rw-r--r--arch/arm/mach-ks8695/include/mach/regs-pci.h53
-rw-r--r--arch/arm/mach-ks8695/include/mach/regs-switch.h66
-rw-r--r--arch/arm/mach-ks8695/include/mach/regs-sys.h34
-rw-r--r--arch/arm/mach-ks8695/include/mach/regs-timer.h40
-rw-r--r--arch/arm/mach-ks8695/include/mach/regs-uart.h92
-rw-r--r--arch/arm/mach-ks8695/include/mach/regs-wan.h65
-rw-r--r--arch/arm/mach-ks8695/include/mach/system.h48
-rw-r--r--arch/arm/mach-ks8695/include/mach/timex.h20
-rw-r--r--arch/arm/mach-ks8695/include/mach/uncompress.h37
-rw-r--r--arch/arm/mach-ks8695/include/mach/vmalloc.h19
-rw-r--r--arch/arm/mach-ks8695/irq.c6
-rw-r--r--arch/arm/mach-ks8695/leds.c4
-rw-r--r--arch/arm/mach-ks8695/pci.c6
-rw-r--r--arch/arm/mach-ks8695/time.c4
33 files changed, 1261 insertions, 20 deletions
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index 05ac2bd04020..0468e93b7d3b 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -18,7 +18,7 @@
18#include <asm/mach/map.h> 18#include <asm/mach/map.h>
19#include <asm/mach/irq.h> 19#include <asm/mach/irq.h>
20 20
21#include <asm/arch/devices.h> 21#include <mach/devices.h>
22 22
23#include "generic.h" 23#include "generic.h"
24 24
diff --git a/arch/arm/mach-ks8695/cpu.c b/arch/arm/mach-ks8695/cpu.c
index 97ab618fc358..c6c08e800233 100644
--- a/arch/arm/mach-ks8695/cpu.c
+++ b/arch/arm/mach-ks8695/cpu.c
@@ -25,13 +25,13 @@
25#include <linux/module.h> 25#include <linux/module.h>
26#include <linux/init.h> 26#include <linux/init.h>
27 27
28#include <asm/arch/hardware.h> 28#include <mach/hardware.h>
29#include <asm/io.h> 29#include <asm/io.h>
30#include <asm/mach/arch.h> 30#include <asm/mach/arch.h>
31#include <asm/mach/map.h> 31#include <asm/mach/map.h>
32 32
33#include <asm/arch/regs-sys.h> 33#include <mach/regs-sys.h>
34#include <asm/arch/regs-misc.h> 34#include <mach/regs-misc.h>
35 35
36 36
37static struct __initdata map_desc ks8695_io_desc[] = { 37static struct __initdata map_desc ks8695_io_desc[] = {
diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c
index 3db2ec61d06f..4bd251482c8f 100644
--- a/arch/arm/mach-ks8695/devices.c
+++ b/arch/arm/mach-ks8695/devices.c
@@ -22,9 +22,9 @@
22 22
23#include <linux/platform_device.h> 23#include <linux/platform_device.h>
24 24
25#include <asm/arch/regs-wan.h> 25#include <mach/regs-wan.h>
26#include <asm/arch/regs-lan.h> 26#include <mach/regs-lan.h>
27#include <asm/arch/regs-hpna.h> 27#include <mach/regs-hpna.h>
28 28
29 29
30/* -------------------------------------------------------------------- 30/* --------------------------------------------------------------------
diff --git a/arch/arm/mach-ks8695/gpio.c b/arch/arm/mach-ks8695/gpio.c
index a1e46436a940..3624e65cd89b 100644
--- a/arch/arm/mach-ks8695/gpio.c
+++ b/arch/arm/mach-ks8695/gpio.c
@@ -25,11 +25,11 @@
25#include <linux/module.h> 25#include <linux/module.h>
26 26
27#include <asm/io.h> 27#include <asm/io.h>
28#include <asm/arch/hardware.h> 28#include <mach/hardware.h>
29#include <asm/mach/irq.h> 29#include <asm/mach/irq.h>
30 30
31#include <asm/arch/regs-gpio.h> 31#include <mach/regs-gpio.h>
32#include <asm/arch/gpio.h> 32#include <mach/gpio.h>
33 33
34/* 34/*
35 * Configure a GPIO line for either GPIO function, or its internal 35 * Configure a GPIO line for either GPIO function, or its internal
diff --git a/arch/arm/mach-ks8695/include/mach/debug-macro.S b/arch/arm/mach-ks8695/include/mach/debug-macro.S
new file mode 100644
index 000000000000..3782c3559497
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/debug-macro.S
@@ -0,0 +1,38 @@
1/*
2 * arch/arm/mach-ks8695/include/mach/debug-macro.S
3 *
4 * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
5 * Copyright (C) 2006 Simtec Electronics
6 *
7 * KS8695 - Debug macros
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 */
13
14#include <mach/hardware.h>
15#include <mach/regs-uart.h>
16
17 .macro addruart, rx
18 mrc p15, 0, \rx, c1, c0
19 tst \rx, #1 @ MMU enabled?
20 ldreq \rx, =KS8695_UART_PA @ physical base address
21 ldrne \rx, =KS8695_UART_VA @ virtual base address
22 .endm
23
24 .macro senduart, rd, rx
25 str \rd, [\rx, #KS8695_URTH] @ Write to Transmit Holding Register
26 .endm
27
28 .macro busyuart, rd, rx
291001: ldr \rd, [\rx, #KS8695_URLS] @ Read Line Status Register
30 tst \rd, #URLS_URTE @ Holding & Shift registers empty?
31 beq 1001b
32 .endm
33
34 .macro waituart, rd, rx
351001: ldr \rd, [\rx, #KS8695_URLS] @ Read Line Status Register
36 tst \rd, #URLS_URTHRE @ Holding Register empty?
37 beq 1001b
38 .endm
diff --git a/arch/arm/mach-ks8695/include/mach/devices.h b/arch/arm/mach-ks8695/include/mach/devices.h
new file mode 100644
index 000000000000..2744fecb429c
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/devices.h
@@ -0,0 +1,37 @@
1/*
2 * arch/arm/mach-ks8695/include/mach/devices.h
3 *
4 * Copyright (C) 2006 Andrew Victor
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10
11#ifndef __ASM_ARCH_DEVICES_H
12#define __ASM_ARCH_DEVICES_H
13
14#include <linux/pci.h>
15
16 /* Ethernet */
17extern void __init ks8695_add_device_wan(void);
18extern void __init ks8695_add_device_lan(void);
19extern void __init ks8695_add_device_hpna(void);
20
21 /* LEDs */
22extern short ks8695_leds_cpu;
23extern short ks8695_leds_timer;
24extern void __init ks8695_init_leds(u8 cpu_led, u8 timer_led);
25
26 /* PCI */
27#define KS8695_MODE_PCI 0
28#define KS8695_MODE_MINIPCI 1
29#define KS8695_MODE_CARDBUS 2
30
31struct ks8695_pci_cfg {
32 short mode;
33 int (*map_irq)(struct pci_dev *, u8, u8);
34};
35extern __init void ks8695_init_pci(struct ks8695_pci_cfg *);
36
37#endif
diff --git a/arch/arm/mach-ks8695/include/mach/dma.h b/arch/arm/mach-ks8695/include/mach/dma.h
new file mode 100644
index 000000000000..561206280089
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/dma.h
@@ -0,0 +1,17 @@
1/*
2 * arch/arm/mach-ks8695/include/mach/dma.h
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; either version 2 of the License, or
7 * (at your option) any later version.
8 *
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 */
diff --git a/arch/arm/mach-ks8695/include/mach/entry-macro.S b/arch/arm/mach-ks8695/include/mach/entry-macro.S
new file mode 100644
index 000000000000..b4fe0c11c6ce
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/entry-macro.S
@@ -0,0 +1,53 @@
1/*
2 * arch/arm/mach-ks8695/include/mach/entry-macro.S
3 *
4 * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
5 * Copyright (C) 2006 Simtec Electronics
6 *
7 * Low-level IRQ helper macros for KS8695
8 *
9 * This file is licensed under the terms of the GNU General Public
10 * License version 2. This program is licensed "as is" without any
11 * warranty of any kind, whether express or implied.
12*/
13
14#include <mach/hardware.h>
15#include <mach/regs-irq.h>
16
17 .macro disable_fiq
18 .endm
19
20 .macro get_irqnr_preamble, base, tmp
21 ldr \base, =KS8695_IRQ_VA @ Base address of interrupt controller
22 .endm
23
24 .macro arch_ret_to_user, tmp1, tmp2
25 .endm
26
27 .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
28 ldr \irqstat, [\base, #KS8695_INTMS] @ Mask Status register
29
30 teq \irqstat, #0
31 beq 1001f
32
33 mov \irqnr, #0
34
35 tst \irqstat, #0xff
36 moveq \irqstat, \irqstat, lsr #8
37 addeq \irqnr, \irqnr, #8
38 tsteq \irqstat, #0xff
39 moveq \irqstat, \irqstat, lsr #8
40 addeq \irqnr, \irqnr, #8
41 tsteq \irqstat, #0xff
42 moveq \irqstat, \irqstat, lsr #8
43 addeq \irqnr, \irqnr, #8
44 tst \irqstat, #0x0f
45 moveq \irqstat, \irqstat, lsr #4
46 addeq \irqnr, \irqnr, #4
47 tst \irqstat, #0x03
48 moveq \irqstat, \irqstat, lsr #2
49 addeq \irqnr, \irqnr, #2
50 tst \irqstat, #0x01
51 addeqs \irqnr, \irqnr, #1
521001:
53 .endm
diff --git a/arch/arm/mach-ks8695/include/mach/gpio.h b/arch/arm/mach-ks8695/include/mach/gpio.h
new file mode 100644
index 000000000000..73c84168761c
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/gpio.h
@@ -0,0 +1,79 @@
1/*
2 * arch/arm/mach-ks8695/include/mach/gpio.h
3 *
4 * Copyright (C) 2006 Andrew Victor
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10
11#ifndef __ASM_ARCH_GPIO_H_
12#define __ASM_ARCH_GPIO_H_
13
14#define KS8695_GPIO_0 0
15#define KS8695_GPIO_1 1
16#define KS8695_GPIO_2 2
17#define KS8695_GPIO_3 3
18#define KS8695_GPIO_4 4
19#define KS8695_GPIO_5 5
20#define KS8695_GPIO_6 6
21#define KS8695_GPIO_7 7
22#define KS8695_GPIO_8 8
23#define KS8695_GPIO_9 9
24#define KS8695_GPIO_10 10
25#define KS8695_GPIO_11 11
26#define KS8695_GPIO_12 12
27#define KS8695_GPIO_13 13
28#define KS8695_GPIO_14 14
29#define KS8695_GPIO_15 15
30
31
32/*
33 * Configure GPIO pin as external interrupt source.
34 */
35int __init_or_module ks8695_gpio_interrupt(unsigned int pin, unsigned int type);
36
37/*
38 * Configure the GPIO line as an input.
39 */
40int __init_or_module gpio_direction_input(unsigned int pin);
41
42/*
43 * Configure the GPIO line as an output, with default state.
44 */
45int __init_or_module gpio_direction_output(unsigned int pin, unsigned int state);
46
47/*
48 * Set the state of an output GPIO line.
49 */
50void gpio_set_value(unsigned int pin, unsigned int state);
51
52/*
53 * Read the state of a GPIO line.
54 */
55int gpio_get_value(unsigned int pin);
56
57/*
58 * Map GPIO line to IRQ number.
59 */
60int gpio_to_irq(unsigned int pin);
61
62/*
63 * Map IRQ number to GPIO line.
64 */
65int irq_to_gpio(unsigned int irq);
66
67
68#include <asm-generic/gpio.h>
69
70static inline int gpio_request(unsigned int pin, const char *label)
71{
72 return 0;
73}
74
75static inline void gpio_free(unsigned int pin)
76{
77}
78
79#endif
diff --git a/arch/arm/mach-ks8695/include/mach/hardware.h b/arch/arm/mach-ks8695/include/mach/hardware.h
new file mode 100644
index 000000000000..1d640d075b7e
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/hardware.h
@@ -0,0 +1,49 @@
1/*
2 * arch/arm/mach-ks8695/include/mach/hardware.h
3 *
4 * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
5 * Copyright (C) 2006 Simtec Electronics
6 *
7 * KS8695 - Memory Map definitions
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12*/
13
14#ifndef __ASM_ARCH_HARDWARE_H
15#define __ASM_ARCH_HARDWARE_H
16
17#include <asm/sizes.h>
18
19/*
20 * Physical RAM address.
21 */
22#define KS8695_SDRAM_PA 0x00000000
23
24
25/*
26 * We map an entire MiB with the System Configuration Registers in even
27 * though only 64KiB is needed. This makes it easier for use with the
28 * head debug code as the initial MMU setup only deals in L1 sections.
29 */
30#define KS8695_IO_PA 0x03F00000
31#define KS8695_IO_VA 0xF0000000
32#define KS8695_IO_SIZE SZ_1M
33
34#define KS8695_PCIMEM_PA 0x60000000
35#define KS8695_PCIMEM_SIZE SZ_512M
36
37#define KS8695_PCIIO_PA 0x80000000
38#define KS8695_PCIIO_SIZE SZ_64K
39
40
41/*
42 * PCI support
43 */
44#define pcibios_assign_all_busses() 1
45
46#define PCIBIOS_MIN_IO 0
47#define PCIBIOS_MIN_MEM 0
48
49#endif
diff --git a/arch/arm/mach-ks8695/include/mach/io.h b/arch/arm/mach-ks8695/include/mach/io.h
new file mode 100644
index 000000000000..f364f24ffe1e
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/io.h
@@ -0,0 +1,19 @@
1/*
2 * arch/arm/mach-ks8695/include/mach/io.h
3 *
4 * Copyright (C) 2006 Andrew Victor
5 *
6 * This file is licensed under the terms of the GNU General Public
7 * License version 2. This program is licensed "as is" without any
8 * warranty of any kind, whether express or implied.
9 */
10
11#ifndef __ASM_ARCH_IO_H
12#define __ASM_ARCH_IO_H
13
14#define IO_SPACE_LIMIT 0xffffffff
15
16#define __io(a) ((void __iomem *)(a))
17#define __mem_pci(a) (a)
18
19#endif
diff --git a/arch/arm/mach-ks8695/include/mach/irqs.h b/arch/arm/mach-ks8695/include/mach/irqs.h
new file mode 100644
index 000000000000..86fc9e6ce404
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/irqs.h
@@ -0,0 +1,54 @@
1/*
2 * arch/arm/mach-ks8695/include/mach/irqs.h
3 *
4 * Copyright (C) 2006 Simtec Electronics
5 * Ben Dooks <ben@simtec.co.uk>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 */
11
12#ifndef __ASM_ARCH_IRQS_H
13#define __ASM_ARCH_IRQS_H
14
15
16#define NR_IRQS 32
17
18/*
19 * IRQ definitions
20 */
21#define KS8695_IRQ_COMM_RX 0
22#define KS8695_IRQ_COMM_TX 1
23#define KS8695_IRQ_EXTERN0 2
24#define KS8695_IRQ_EXTERN1 3
25#define KS8695_IRQ_EXTERN2 4
26#define KS8695_IRQ_EXTERN3 5
27#define KS8695_IRQ_TIMER0 6
28#define KS8695_IRQ_TIMER1 7
29#define KS8695_IRQ_UART_TX 8
30#define KS8695_IRQ_UART_RX 9
31#define KS8695_IRQ_UART_LINE_STATUS 10
32#define KS8695_IRQ_UART_MODEM_STATUS 11
33#define KS8695_IRQ_LAN_RX_STOP 12
34#define KS8695_IRQ_LAN_TX_STOP 13
35#define KS8695_IRQ_LAN_RX_BUF 14
36#define KS8695_IRQ_LAN_TX_BUF 15
37#define KS8695_IRQ_LAN_RX_STATUS 16
38#define KS8695_IRQ_LAN_TX_STATUS 17
39#define KS8695_IRQ_HPNA_RX_STOP 18
40#define KS8695_IRQ_HPNA_TX_STOP 19
41#define KS8695_IRQ_HPNA_RX_BUF 20
42#define KS8695_IRQ_HPNA_TX_BUF 21
43#define KS8695_IRQ_HPNA_RX_STATUS 22
44#define KS8695_IRQ_HPNA_TX_STATUS 23
45#define KS8695_IRQ_BUS_ERROR 24
46#define KS8695_IRQ_WAN_RX_STOP 25
47#define KS8695_IRQ_WAN_TX_STOP 26
48#define KS8695_IRQ_WAN_RX_BUF 27
49#define KS8695_IRQ_WAN_TX_BUF 28
50#define KS8695_IRQ_WAN_RX_STATUS 29
51#define KS8695_IRQ_WAN_TX_STATUS 30
52#define KS8695_IRQ_WAN_LINK 31
53
54#endif
diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h
new file mode 100644
index 000000000000..dadbe66cb75c
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/memory.h
@@ -0,0 +1,49 @@
1/*
2 * arch/arm/mach-ks8695/include/mach/memory.h
3 *
4 * Copyright (C) 2006 Andrew Victor
5 *
6 * KS8695 Memory definitions
7 *
8 * This file is licensed under the terms of the GNU General Public
9 * License version 2. This program is licensed "as is" without any
10 * warranty of any kind, whether express or implied.
11 */
12
13#ifndef __ASM_ARCH_MEMORY_H
14#define __ASM_ARCH_MEMORY_H
15
16#include <mach/hardware.h>
17
18/*
19 * Physical SRAM offset.
20 */
21#define PHYS_OFFSET KS8695_SDRAM_PA
22
23#ifndef __ASSEMBLY__
24
25#ifdef CONFIG_PCI
26
27/* PCI mappings */
28#define __virt_to_bus(x) ((x) - PAGE_OFFSET + KS8695_PCIMEM_PA)
29#define __bus_to_virt(x) ((x) - KS8695_PCIMEM_PA + PAGE_OFFSET)
30
31/* Platform-bus mapping */
32extern struct bus_type platform_bus_type;
33#define is_lbus_device(dev) (dev && dev->bus == &platform_bus_type)
34#define __arch_dma_to_virt(dev, x) ({ is_lbus_device(dev) ? \
35 __phys_to_virt(x) : __bus_to_virt(x); })
36#define __arch_virt_to_dma(dev, x) ({ is_lbus_device(dev) ? \
37 (dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); })
38#define __arch_page_to_dma(dev, x) __arch_virt_to_dma(dev, page_address(x))
39
40#else
41
42#define __virt_to_bus(x) __virt_to_phys(x)
43#define __bus_to_virt(x) __phys_to_virt(x)
44
45#endif
46
47#endif
48
49#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-gpio.h b/arch/arm/mach-ks8695/include/mach/regs-gpio.h
new file mode 100644
index 000000000000..0df6fe61d1ce
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-gpio.h
@@ -0,0 +1,55 @@
1/*
2 * arch/arm/mach-ks8695/include/mach/regs-gpio.h
3 *
4 * Copyright (C) 2007 Andrew Victor
5 *
6 * KS8695 - GPIO control registers and bit definitions.
7 *
8 * This file is licensed under the terms of the GNU General Public
9 * License version 2. This program is licensed "as is" without any
10 * warranty of any kind, whether express or implied.
11 */
12
13#ifndef KS8695_GPIO_H
14#define KS8695_GPIO_H
15
16#define KS8695_GPIO_OFFSET (0xF0000 + 0xE600)
17#define KS8695_GPIO_VA (KS8695_IO_VA + KS8695_GPIO_OFFSET)
18#define KS8695_GPIO_PA (KS8695_IO_PA + KS8695_GPIO_OFFSET)
19
20
21#define KS8695_IOPM (0x00) /* I/O Port Mode Register */
22#define KS8695_IOPC (0x04) /* I/O Port Control Register */
23#define KS8695_IOPD (0x08) /* I/O Port Data Register */
24
25
26/* Port Mode Register */
27#define IOPM_(x) (1 << (x)) /* Mode for GPIO Pin x */
28
29/* Port Control Register */
30#define IOPC_IOTIM1EN (1 << 17) /* GPIO Pin for Timer1 Enable */
31#define IOPC_IOTIM0EN (1 << 16) /* GPIO Pin for Timer0 Enable */
32#define IOPC_IOEINT3EN (1 << 15) /* GPIO Pin for External/Soft Interrupt 3 Enable */
33#define IOPC_IOEINT3TM (7 << 12) /* GPIO Pin for External/Soft Interrupt 3 Trigger Mode */
34#define IOPC_IOEINT3_MODE(x) ((x) << 12)
35#define IOPC_IOEINT2EN (1 << 11) /* GPIO Pin for External/Soft Interrupt 2 Enable */
36#define IOPC_IOEINT2TM (7 << 8) /* GPIO Pin for External/Soft Interrupt 2 Trigger Mode */
37#define IOPC_IOEINT2_MODE(x) ((x) << 8)
38#define IOPC_IOEINT1EN (1 << 7) /* GPIO Pin for External/Soft Interrupt 1 Enable */
39#define IOPC_IOEINT1TM (7 << 4) /* GPIO Pin for External/Soft Interrupt 1 Trigger Mode */
40#define IOPC_IOEINT1_MODE(x) ((x) << 4)
41#define IOPC_IOEINT0EN (1 << 3) /* GPIO Pin for External/Soft Interrupt 0 Enable */
42#define IOPC_IOEINT0TM (7 << 0) /* GPIO Pin for External/Soft Interrupt 0 Trigger Mode */
43#define IOPC_IOEINT0_MODE(x) ((x) << 0)
44
45 /* Trigger Modes */
46#define IOPC_TM_LOW (0) /* Level Detection (Active Low) */
47#define IOPC_TM_HIGH (1) /* Level Detection (Active High) */
48#define IOPC_TM_RISING (2) /* Rising Edge Detection */
49#define IOPC_TM_FALLING (4) /* Falling Edge Detection */
50#define IOPC_TM_EDGE (6) /* Both Edge Detection */
51
52/* Port Data Register */
53#define IOPD_(x) (1 << (x)) /* Signal Level of GPIO Pin x */
54
55#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-hpna.h b/arch/arm/mach-ks8695/include/mach/regs-hpna.h
new file mode 100644
index 000000000000..815ce5c2e3b9
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-hpna.h
@@ -0,0 +1,25 @@
1/*
2 * arch/arm/mach-ks8695/include/mach/regs-wan.h
3 *
4 * Copyright (C) 2006 Andrew Victor
5 *
6 * KS8695 - HPNA Registers and bit definitions.
7 *
8 * This file is licensed under the terms of the GNU General Public
9 * License version 2. This program is licensed "as is" without any
10 * warranty of any kind, whether express or implied.
11 */
12
13#ifndef KS8695_HPNA_H
14#define KS8695_HPNA_H
15
16#define KS8695_HPNA_OFFSET (0xF0000 + 0xA000)
17#define KS8695_HPNA_VA (KS8695_IO_VA + KS8695_HPNA_OFFSET)
18#define KS8695_HPNA_PA (KS8695_IO_PA + KS8695_HPNA_OFFSET)
19
20
21/*
22 * HPNA registers
23 */
24
25#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-irq.h b/arch/arm/mach-ks8695/include/mach/regs-irq.h
new file mode 100644
index 000000000000..352b7e8704d5
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-irq.h
@@ -0,0 +1,41 @@
1/*
2 * arch/arm/mach-ks8695/include/mach/regs-irq.h
3 *
4 * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
5 * Copyright (C) 2006 Simtec Electronics
6 *
7 * KS8695 - IRQ registers and bit definitions
8 *
9 * This file is licensed under the terms of the GNU General Public
10 * License version 2. This program is licensed "as is" without any
11 * warranty of any kind, whether express or implied.
12 */
13
14#ifndef KS8695_IRQ_H
15#define KS8695_IRQ_H
16
17#define KS8695_IRQ_OFFSET (0xF0000 + 0xE200)
18#define KS8695_IRQ_VA (KS8695_IO_VA + KS8695_IRQ_OFFSET)
19#define KS8695_IRQ_PA (KS8695_IO_PA + KS8695_IRQ_OFFSET)
20
21
22/*
23 * Interrupt Controller registers
24 */
25#define KS8695_INTMC (0x00) /* Mode Control Register */
26#define KS8695_INTEN (0x04) /* Interrupt Enable Register */
27#define KS8695_INTST (0x08) /* Interrupt Status Register */
28#define KS8695_INTPW (0x0c) /* Interrupt Priority (WAN MAC) */
29#define KS8695_INTPH (0x10) /* Interrupt Priority (HPNA) [KS8695 only] */
30#define KS8695_INTPL (0x14) /* Interrupt Priority (LAN MAC) */
31#define KS8695_INTPT (0x18) /* Interrupt Priority (Timer) */
32#define KS8695_INTPU (0x1c) /* Interrupt Priority (UART) */
33#define KS8695_INTPE (0x20) /* Interrupt Priority (External Interrupt) */
34#define KS8695_INTPC (0x24) /* Interrupt Priority (Communications Channel) */
35#define KS8695_INTPBE (0x28) /* Interrupt Priority (Bus Error Response) */
36#define KS8695_INTMS (0x2c) /* Interrupt Mask Status Register */
37#define KS8695_INTHPF (0x30) /* Interrupt Pending Highest Priority (FIQ) */
38#define KS8695_INTHPI (0x34) /* Interrupt Pending Highest Priority (IRQ) */
39
40
41#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-lan.h b/arch/arm/mach-ks8695/include/mach/regs-lan.h
new file mode 100644
index 000000000000..9ef409901e76
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-lan.h
@@ -0,0 +1,65 @@
1/*
2 * arch/arm/mach-ks8695/include/mach/regs-lan.h
3 *
4 * Copyright (C) 2006 Andrew Victor
5 *
6 * KS8695 - LAN Registers and bit definitions.
7 *
8 * This file is licensed under the terms of the GNU General Public
9 * License version 2. This program is licensed "as is" without any
10 * warranty of any kind, whether express or implied.
11 */
12
13#ifndef KS8695_LAN_H
14#define KS8695_LAN_H
15
16#define KS8695_LAN_OFFSET (0xF0000 + 0x8000)
17#define KS8695_LAN_VA (KS8695_IO_VA + KS8695_LAN_OFFSET)
18#define KS8695_LAN_PA (KS8695_IO_PA + KS8695_LAN_OFFSET)
19
20
21/*
22 * LAN registers
23 */
24#define KS8695_LMDTXC (0x00) /* DMA Transmit Control */
25#define KS8695_LMDRXC (0x04) /* DMA Receive Control */
26#define KS8695_LMDTSC (0x08) /* DMA Transmit Start Command */
27#define KS8695_LMDRSC (0x0c) /* DMA Receive Start Command */
28#define KS8695_LTDLB (0x10) /* Transmit Descriptor List Base Address */
29#define KS8695_LRDLB (0x14) /* Receive Descriptor List Base Address */
30#define KS8695_LMAL (0x18) /* MAC Station Address Low */
31#define KS8695_LMAH (0x1c) /* MAC Station Address High */
32#define KS8695_LMAAL_(n) (0x80 + ((n)*8)) /* MAC Additional Station Address (0..15) Low */
33#define KS8695_LMAAH_(n) (0x84 + ((n)*8)) /* MAC Additional Station Address (0..15) High */
34
35
36/* DMA Transmit Control Register */
37#define LMDTXC_LMTRST (1 << 31) /* Soft Reset */
38#define LMDTXC_LMTBS (0x3f << 24) /* Transmit Burst Size */
39#define LMDTXC_LMTUCG (1 << 18) /* Transmit UDP Checksum Generate */
40#define LMDTXC_LMTTCG (1 << 17) /* Transmit TCP Checksum Generate */
41#define LMDTXC_LMTICG (1 << 16) /* Transmit IP Checksum Generate */
42#define LMDTXC_LMTFCE (1 << 9) /* Transmit Flow Control Enable */
43#define LMDTXC_LMTLB (1 << 8) /* Loopback mode */
44#define LMDTXC_LMTEP (1 << 2) /* Transmit Enable Padding */
45#define LMDTXC_LMTAC (1 << 1) /* Transmit Add CRC */
46#define LMDTXC_LMTE (1 << 0) /* TX Enable */
47
48/* DMA Receive Control Register */
49#define LMDRXC_LMRBS (0x3f << 24) /* Receive Burst Size */
50#define LMDRXC_LMRUCC (1 << 18) /* Receive UDP Checksum check */
51#define LMDRXC_LMRTCG (1 << 17) /* Receive TCP Checksum check */
52#define LMDRXC_LMRICG (1 << 16) /* Receive IP Checksum check */
53#define LMDRXC_LMRFCE (1 << 9) /* Receive Flow Control Enable */
54#define LMDRXC_LMRB (1 << 6) /* Receive Broadcast */
55#define LMDRXC_LMRM (1 << 5) /* Receive Multicast */
56#define LMDRXC_LMRU (1 << 4) /* Receive Unicast */
57#define LMDRXC_LMRERR (1 << 3) /* Receive Error Frame */
58#define LMDRXC_LMRA (1 << 2) /* Receive All */
59#define LMDRXC_LMRE (1 << 1) /* RX Enable */
60
61/* Additional Station Address High */
62#define LMAAH_E (1 << 31) /* Address Enabled */
63
64
65#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-mem.h b/arch/arm/mach-ks8695/include/mach/regs-mem.h
new file mode 100644
index 000000000000..55806bc68ce3
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-mem.h
@@ -0,0 +1,89 @@
1/*
2 * arch/arm/mach-ks8695/include/mach/regs-mem.h
3 *
4 * Copyright (C) 2006 Andrew Victor
5 *
6 * KS8695 - Memory Controller registers and bit definitions
7 *
8 * This file is licensed under the terms of the GNU General Public
9 * License version 2. This program is licensed "as is" without any
10 * warranty of any kind, whether express or implied.
11 */
12
13#ifndef KS8695_MEM_H
14#define KS8695_MEM_H
15
16#define KS8695_MEM_OFFSET (0xF0000 + 0x4000)
17#define KS8695_MEM_VA (KS8695_IO_VA + KS8695_MEM_OFFSET)
18#define KS8695_MEM_PA (KS8695_IO_PA + KS8695_MEM_OFFSET)
19
20
21/*
22 * Memory Controller Registers
23 */
24#define KS8695_EXTACON0 (0x00) /* External I/O 0 Access Control */
25#define KS8695_EXTACON1 (0x04) /* External I/O 1 Access Control */
26#define KS8695_EXTACON2 (0x08) /* External I/O 2 Access Control */
27#define KS8695_ROMCON0 (0x10) /* ROM/SRAM/Flash 1 Control Register */
28#define KS8695_ROMCON1 (0x14) /* ROM/SRAM/Flash 2 Control Register */
29#define KS8695_ERGCON (0x20) /* External I/O and ROM/SRAM/Flash General Register */
30#define KS8695_SDCON0 (0x30) /* SDRAM Control Register 0 */
31#define KS8695_SDCON1 (0x34) /* SDRAM Control Register 1 */
32#define KS8695_SDGCON (0x38) /* SDRAM General Control */
33#define KS8695_SDBCON (0x3c) /* SDRAM Buffer Control */
34#define KS8695_REFTIM (0x40) /* SDRAM Refresh Timer */
35
36
37/* External I/O Access Control Registers */
38#define EXTACON_EBNPTR (0x3ff << 22) /* Last Address Pointer */
39#define EXTACON_EBBPTR (0x3ff << 12) /* Base Pointer */
40#define EXTACON_EBTACT (7 << 9) /* Write Enable/Output Enable Active Time */
41#define EXTACON_EBTCOH (7 << 6) /* Chip Select Hold Time */
42#define EXTACON_EBTACS (7 << 3) /* Address Setup Time before ECSN */
43#define EXTACON_EBTCOS (7 << 0) /* Chip Select Time before OEN */
44
45/* ROM/SRAM/Flash Control Register */
46#define ROMCON_RBNPTR (0x3ff << 22) /* Next Pointer */
47#define ROMCON_RBBPTR (0x3ff << 12) /* Base Pointer */
48#define ROMCON_RBTACC (7 << 4) /* Access Cycle Time */
49#define ROMCON_RBTPA (3 << 2) /* Page Address Access Time */
50#define ROMCON_PMC (3 << 0) /* Page Mode Configuration */
51#define PMC_NORMAL (0 << 0)
52#define PMC_4WORD (1 << 0)
53#define PMC_8WORD (2 << 0)
54#define PMC_16WORD (3 << 0)
55
56/* External I/O and ROM/SRAM/Flash General Register */
57#define ERGCON_TMULT (3 << 28) /* Time Multiplier */
58#define ERGCON_DSX2 (3 << 20) /* Data Width (External I/O Bank 2) */
59#define ERGCON_DSX1 (3 << 18) /* Data Width (External I/O Bank 1) */
60#define ERGCON_DSX0 (3 << 16) /* Data Width (External I/O Bank 0) */
61#define ERGCON_DSR1 (3 << 2) /* Data Width (ROM/SRAM/Flash Bank 1) */
62#define ERGCON_DSR0 (3 << 0) /* Data Width (ROM/SRAM/Flash Bank 0) */
63
64/* SDRAM Control Register */
65#define SDCON_DBNPTR (0x3ff << 22) /* Last Address Pointer */
66#define SDCON_DBBPTR (0x3ff << 12) /* Base Pointer */
67#define SDCON_DBCAB (3 << 8) /* Column Address Bits */
68#define SDCON_DBBNUM (1 << 3) /* Number of Banks */
69#define SDCON_DBDBW (3 << 1) /* Data Bus Width */
70
71/* SDRAM General Control Register */
72#define SDGCON_SDTRC (3 << 2) /* RAS to CAS latency */
73#define SDGCON_SDCAS (3 << 0) /* CAS latency */
74
75/* SDRAM Buffer Control Register */
76#define SDBCON_SDESTA (1 << 31) /* SDRAM Engine Status */
77#define SDBCON_RBUFBDIS (1 << 24) /* Read Buffer Burst Enable */
78#define SDBCON_WFIFOEN (1 << 23) /* Write FIFO Enable */
79#define SDBCON_RBUFEN (1 << 22) /* Read Buffer Enable */
80#define SDBCON_FLUSHWFIFO (1 << 21) /* Flush Write FIFO */
81#define SDBCON_RBUFINV (1 << 20) /* Read Buffer Invalidate */
82#define SDBCON_SDINI (3 << 16) /* SDRAM Initialization Control */
83#define SDBCON_SDMODE (0x3fff << 0) /* SDRAM Mode Register Value Program */
84
85/* SDRAM Refresh Timer Register */
86#define REFTIM_REFTIM (0xffff << 0) /* Refresh Timer Value */
87
88
89#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-misc.h b/arch/arm/mach-ks8695/include/mach/regs-misc.h
new file mode 100644
index 000000000000..2740c52494a0
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-misc.h
@@ -0,0 +1,97 @@
1/*
2 * arch/arm/mach-ks8695/include/mach/regs-misc.h
3 *
4 * Copyright (C) 2006 Andrew Victor
5 *
6 * KS8695 - Miscellaneous Registers
7 *
8 * This file is licensed under the terms of the GNU General Public
9 * License version 2. This program is licensed "as is" without any
10 * warranty of any kind, whether express or implied.
11 */
12
13#ifndef KS8695_MISC_H
14#define KS8695_MISC_H
15
16#define KS8695_MISC_OFFSET (0xF0000 + 0xEA00)
17#define KS8695_MISC_VA (KS8695_IO_VA + KS8695_MISC_OFFSET)
18#define KS8695_MISC_PA (KS8695_IO_PA + KS8695_MISC_OFFSET)
19
20
21/*
22 * Miscellaneous registers
23 */
24#define KS8695_DID (0x00) /* Device ID */
25#define KS8695_RID (0x04) /* Revision ID */
26#define KS8695_HMC (0x08) /* HPNA Miscellaneous Control [KS8695 only] */
27#define KS8695_WMC (0x0c) /* WAN Miscellaneous Control */
28#define KS8695_WPPM (0x10) /* WAN PHY Power Management */
29#define KS8695_PPS (0x1c) /* PHY PowerSave */
30
31/* Device ID Register */
32#define DID_ID (0xffff << 0) /* Device ID */
33
34/* Revision ID Register */
35#define RID_SUBID (0xf << 4) /* Sub-Device ID */
36#define RID_REVISION (0xf << 0) /* Revision ID */
37
38/* HPNA Miscellaneous Control Register */
39#define HMC_HSS (1 << 1) /* Speed */
40#define HMC_HDS (1 << 0) /* Duplex */
41
42/* WAN Miscellaneous Control Register */
43#define WMC_WANC (1 << 30) /* Auto-negotiation complete */
44#define WMC_WANR (1 << 29) /* Auto-negotiation restart */
45#define WMC_WANAP (1 << 28) /* Advertise Pause */
46#define WMC_WANA100F (1 << 27) /* Advertise 100 FDX */
47#define WMC_WANA100H (1 << 26) /* Advertise 100 HDX */
48#define WMC_WANA10F (1 << 25) /* Advertise 10 FDX */
49#define WMC_WANA10H (1 << 24) /* Advertise 10 HDX */
50#define WMC_WLS (1 << 23) /* Link status */
51#define WMC_WDS (1 << 22) /* Duplex status */
52#define WMC_WSS (1 << 21) /* Speed status */
53#define WMC_WLPP (1 << 20) /* Link Partner Pause */
54#define WMC_WLP100F (1 << 19) /* Link Partner 100 FDX */
55#define WMC_WLP100H (1 << 18) /* Link Partner 100 HDX */
56#define WMC_WLP10F (1 << 17) /* Link Partner 10 FDX */
57#define WMC_WLP10H (1 << 16) /* Link Partner 10 HDX */
58#define WMC_WAND (1 << 15) /* Auto-negotiation disable */
59#define WMC_WANF100 (1 << 14) /* Force 100 */
60#define WMC_WANFF (1 << 13) /* Force FDX */
61#define WMC_WLED1S (7 << 4) /* LED1 Select */
62#define WLED1S_SPEED (0 << 4)
63#define WLED1S_LINK (1 << 4)
64#define WLED1S_DUPLEX (2 << 4)
65#define WLED1S_COLLISION (3 << 4)
66#define WLED1S_ACTIVITY (4 << 4)
67#define WLED1S_FDX_COLLISION (5 << 4)
68#define WLED1S_LINK_ACTIVITY (6 << 4)
69#define WMC_WLED0S (7 << 0) /* LED0 Select */
70#define WLED0S_SPEED (0 << 0)
71#define WLED0S_LINK (1 << 0)
72#define WLED0S_DUPLEX (2 << 0)
73#define WLED0S_COLLISION (3 << 0)
74#define WLED0S_ACTIVITY (4 << 0)
75#define WLED0S_FDX_COLLISION (5 << 0)
76#define WLED0S_LINK_ACTIVITY (6 << 0)
77
78/* WAN PHY Power Management Register */
79#define WPPM_WLPBK (1 << 14) /* Local Loopback */
80#define WPPM_WRLPKB (1 << 13) /* Remove Loopback */
81#define WPPM_WPI (1 << 12) /* PHY isolate */
82#define WPPM_WFL (1 << 10) /* Force link */
83#define WPPM_MDIXS (1 << 9) /* MDIX Status */
84#define WPPM_FEF (1 << 8) /* Far End Fault */
85#define WPPM_AMDIXP (1 << 7) /* Auto MDIX Parameter */
86#define WPPM_TXDIS (1 << 6) /* Disable transmitter */
87#define WPPM_DFEF (1 << 5) /* Disable Far End Fault */
88#define WPPM_PD (1 << 4) /* Power Down */
89#define WPPM_DMDX (1 << 3) /* Disable Auto MDI/MDIX */
90#define WPPM_FMDX (1 << 2) /* Force MDIX */
91#define WPPM_LPBK (1 << 1) /* MAX Loopback */
92
93/* PHY Power Save Register */
94#define PPS_PPSM (1 << 0) /* PHY Power Save Mode */
95
96
97#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-pci.h b/arch/arm/mach-ks8695/include/mach/regs-pci.h
new file mode 100644
index 000000000000..75a9db6edbd9
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-pci.h
@@ -0,0 +1,53 @@
1/*
2 * arch/arm/mach-ks8695/include/mach/regs-pci.h
3 *
4 * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
5 * Copyright (C) 2006 Simtec Electronics
6 *
7 * KS8695 - PCI bridge registers and bit definitions.
8 *
9 * This file is licensed under the terms of the GNU General Public
10 * License version 2. This program is licensed "as is" without any
11 * warranty of any kind, whether express or implied.
12 */
13
14#define KS8695_PCI_OFFSET (0xF0000 + 0x2000)
15#define KS8695_PCI_VA (KS8695_IO_VA + KS8695_PCI_OFFSET)
16#define KS8695_PCI_PA (KS8695_IO_PA + KS8695_PCI_OFFSET)
17
18
19#define KS8695_CRCFID (0x000) /* Configuration: Identification */
20#define KS8695_CRCFCS (0x004) /* Configuration: Command and Status */
21#define KS8695_CRCFRV (0x008) /* Configuration: Revision */
22#define KS8695_CRCFLT (0x00C) /* Configuration: Latency Timer */
23#define KS8695_CRCBMA (0x010) /* Configuration: Base Memory Address */
24#define KS8695_CRCSID (0x02C) /* Configuration: Subsystem ID */
25#define KS8695_CRCFIT (0x03C) /* Configuration: Interrupt */
26#define KS8695_PBCA (0x100) /* Bridge Configuration Address */
27#define KS8695_PBCD (0x104) /* Bridge Configuration Data */
28#define KS8695_PBM (0x200) /* Bridge Mode */
29#define KS8695_PBCS (0x204) /* Bridge Control and Status */
30#define KS8695_PMBA (0x208) /* Bridge Memory Base Address */
31#define KS8695_PMBAC (0x20C) /* Bridge Memory Base Address Control */
32#define KS8695_PMBAM (0x210) /* Bridge Memory Base Address Mask */
33#define KS8695_PMBAT (0x214) /* Bridge Memory Base Address Translation */
34#define KS8695_PIOBA (0x218) /* Bridge I/O Base Address */
35#define KS8695_PIOBAC (0x21C) /* Bridge I/O Base Address Control */
36#define KS8695_PIOBAM (0x220) /* Bridge I/O Base Address Mask */
37#define KS8695_PIOBAT (0x224) /* Bridge I/O Base Address Translation */
38
39
40/* Configuration: Identification */
41
42/* Configuration: Command and Status */
43
44/* Configuration: Revision */
45
46
47
48#define CFRV_GUEST (1 << 23)
49
50#define PBCA_TYPE1 (1)
51#define PBCA_ENABLE (1 << 31)
52
53
diff --git a/arch/arm/mach-ks8695/include/mach/regs-switch.h b/arch/arm/mach-ks8695/include/mach/regs-switch.h
new file mode 100644
index 000000000000..56d12e8de895
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-switch.h
@@ -0,0 +1,66 @@
1/*
2 * arch/arm/mach-ks8695/include/mach/regs-switch.h
3 *
4 * Copyright (C) 2006 Andrew Victor
5 *
6 * KS8695 - Switch Registers and bit definitions.
7 *
8 * This file is licensed under the terms of the GNU General Public
9 * License version 2. This program is licensed "as is" without any
10 * warranty of any kind, whether express or implied.
11 */
12
13#ifndef KS8695_SWITCH_H
14#define KS8695_SWITCH_H
15
16#define KS8695_SWITCH_OFFSET (0xF0000 + 0xe800)
17#define KS8695_SWITCH_VA (KS8695_IO_VA + KS8695_SWITCH_OFFSET)
18#define KS8695_SWITCH_PA (KS8695_IO_PA + KS8695_SWITCH_OFFSET)
19
20
21/*
22 * Switch registers
23 */
24#define KS8695_SEC0 (0x00) /* Switch Engine Control 0 */
25#define KS8695_SEC1 (0x04) /* Switch Engine Control 1 */
26#define KS8695_SEC2 (0x08) /* Switch Engine Control 2 */
27
28#define KS8695_P(x)_C(z) (0xc0 + (((x)-1)*3 + ((z)-1))*4) /* Port Configuration Registers */
29
30#define KS8695_SEP12AN (0x48) /* Port 1 & 2 Auto-Negotiation */
31#define KS8695_SEP34AN (0x4c) /* Port 3 & 4 Auto-Negotiation */
32#define KS8695_SEIAC (0x50) /* Indirect Access Control */
33#define KS8695_SEIADH2 (0x54) /* Indirect Access Data High 2 */
34#define KS8695_SEIADH1 (0x58) /* Indirect Access Data High 1 */
35#define KS8695_SEIADL (0x5c) /* Indirect Access Data Low */
36#define KS8695_SEAFC (0x60) /* Advance Feature Control */
37#define KS8695_SEDSCPH (0x64) /* TOS Priority High */
38#define KS8695_SEDSCPL (0x68) /* TOS Priority Low */
39#define KS8695_SEMAH (0x6c) /* Switch Engine MAC Address High */
40#define KS8695_SEMAL (0x70) /* Switch Engine MAC Address Low */
41#define KS8695_LPPM12 (0x74) /* Port 1 & 2 PHY Power Management */
42#define KS8695_LPPM34 (0x78) /* Port 3 & 4 PHY Power Management */
43
44
45/* Switch Engine Control 0 */
46#define SEC0_LLED1S (7 << 25) /* LED1 Select */
47#define LLED1S_SPEED (0 << 25)
48#define LLED1S_LINK (1 << 25)
49#define LLED1S_DUPLEX (2 << 25)
50#define LLED1S_COLLISION (3 << 25)
51#define LLED1S_ACTIVITY (4 << 25)
52#define LLED1S_FDX_COLLISION (5 << 25)
53#define LLED1S_LINK_ACTIVITY (6 << 25)
54#define SEC0_LLED0S (7 << 22) /* LED0 Select */
55#define LLED0S_SPEED (0 << 22)
56#define LLED0S_LINK (1 << 22)
57#define LLED0S_DUPLEX (2 << 22)
58#define LLED0S_COLLISION (3 << 22)
59#define LLED0S_ACTIVITY (4 << 22)
60#define LLED0S_FDX_COLLISION (5 << 22)
61#define LLED0S_LINK_ACTIVITY (6 << 22)
62#define SEC0_ENABLE (1 << 0) /* Enable Switch */
63
64
65
66#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-sys.h b/arch/arm/mach-ks8695/include/mach/regs-sys.h
new file mode 100644
index 000000000000..57c20be0c129
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-sys.h
@@ -0,0 +1,34 @@
1/*
2 * arch/arm/mach-ks8695/include/mach/regs-sys.h
3 *
4 * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
5 * Copyright (C) 2006 Simtec Electronics
6 *
7 * KS8695 - System control registers and bit definitions
8 *
9 * This file is licensed under the terms of the GNU General Public
10 * License version 2. This program is licensed "as is" without any
11 * warranty of any kind, whether express or implied.
12 */
13
14#ifndef KS8695_SYS_H
15#define KS8695_SYS_H
16
17#define KS8695_SYS_OFFSET (0xF0000 + 0x0000)
18#define KS8695_SYS_VA (KS8695_IO_VA + KS8695_SYS_OFFSET)
19#define KS8695_SYS_PA (KS8695_IO_PA + KS8695_SYS_OFFSET)
20
21
22#define KS8695_SYSCFG (0x00) /* System Configuration Register */
23#define KS8695_CLKCON (0x04) /* System Clock and Bus Control Register */
24
25
26/* System Configuration Register */
27#define SYSCFG_SPRBP (0x3ff << 16) /* Register Bank Base Pointer */
28
29/* System Clock and Bus Control Register */
30#define CLKCON_SFMODE (1 << 8) /* System Fast Mode for Simulation */
31#define CLKCON_SCDC (7 << 0) /* System Clock Divider Select */
32
33
34#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-timer.h b/arch/arm/mach-ks8695/include/mach/regs-timer.h
new file mode 100644
index 000000000000..e620cda99d2d
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-timer.h
@@ -0,0 +1,40 @@
1/*
2 * arch/arm/mach-ks8695/include/mach/regs-timer.h
3 *
4 * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
5 * Copyright (C) 2006 Simtec Electronics
6 *
7 * KS8695 - Timer registers and bit definitions.
8 *
9 * This file is licensed under the terms of the GNU General Public
10 * License version 2. This program is licensed "as is" without any
11 * warranty of any kind, whether express or implied.
12 */
13
14#ifndef KS8695_TIMER_H
15#define KS8695_TIMER_H
16
17#define KS8695_TMR_OFFSET (0xF0000 + 0xE400)
18#define KS8695_TMR_VA (KS8695_IO_VA + KS8695_TMR_OFFSET)
19#define KS8695_TMR_PA (KS8695_IO_PA + KS8695_TMR_OFFSET)
20
21
22/*
23 * Timer registers
24 */
25#define KS8695_TMCON (0x00) /* Timer Control Register */
26#define KS8695_T1TC (0x04) /* Timer 1 Timeout Count Register */
27#define KS8695_T0TC (0x08) /* Timer 0 Timeout Count Register */
28#define KS8695_T1PD (0x0C) /* Timer 1 Pulse Count Register */
29#define KS8695_T0PD (0x10) /* Timer 0 Pulse Count Register */
30
31
32/* Timer Control Register */
33#define TMCON_T1EN (1 << 1) /* Timer 1 Enable */
34#define TMCON_T0EN (1 << 0) /* Timer 0 Enable */
35
36/* Timer0 Timeout Counter Register */
37#define T0TC_WATCHDOG (0xff) /* Enable watchdog mode */
38
39
40#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-uart.h b/arch/arm/mach-ks8695/include/mach/regs-uart.h
new file mode 100644
index 000000000000..8581fbc6245f
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-uart.h
@@ -0,0 +1,92 @@
1/*
2 * arch/arm/mach-ks8695/include/mach/regs-uart.h
3 *
4 * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
5 * Copyright (C) 2006 Simtec Electronics
6 *
7 * KS8695 - UART register and bit definitions.
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 */
13
14#ifndef KS8695_UART_H
15#define KS8695_UART_H
16
17#define KS8695_UART_OFFSET (0xF0000 + 0xE000)
18#define KS8695_UART_VA (KS8695_IO_VA + KS8695_UART_OFFSET)
19#define KS8695_UART_PA (KS8695_IO_PA + KS8695_UART_OFFSET)
20
21
22/*
23 * UART registers
24 */
25#define KS8695_URRB (0x00) /* Receive Buffer Register */
26#define KS8695_URTH (0x04) /* Transmit Holding Register */
27#define KS8695_URFC (0x08) /* FIFO Control Register */
28#define KS8695_URLC (0x0C) /* Line Control Register */
29#define KS8695_URMC (0x10) /* Modem Control Register */
30#define KS8695_URLS (0x14) /* Line Status Register */
31#define KS8695_URMS (0x18) /* Modem Status Register */
32#define KS8695_URBD (0x1C) /* Baud Rate Divisor Register */
33#define KS8695_USR (0x20) /* Status Register */
34
35
36/* FIFO Control Register */
37#define URFC_URFRT (3 << 6) /* Receive FIFO Trigger Level */
38#define URFC_URFRT_1 (0 << 6)
39#define URFC_URFRT_4 (1 << 6)
40#define URFC_URFRT_8 (2 << 6)
41#define URFC_URFRT_14 (3 << 6)
42#define URFC_URTFR (1 << 2) /* Transmit FIFO Reset */
43#define URFC_URRFR (1 << 1) /* Receive FIFO Reset */
44#define URFC_URFE (1 << 0) /* FIFO Enable */
45
46/* Line Control Register */
47#define URLC_URSBC (1 << 6) /* Set Break Condition */
48#define URLC_PARITY (7 << 3) /* Parity */
49#define URPE_NONE (0 << 3)
50#define URPE_ODD (1 << 3)
51#define URPE_EVEN (3 << 3)
52#define URPE_MARK (5 << 3)
53#define URPE_SPACE (7 << 3)
54#define URLC_URSB (1 << 2) /* Stop Bits */
55#define URLC_URCL (3 << 0) /* Character Length */
56#define URCL_5 (0 << 0)
57#define URCL_6 (1 << 0)
58#define URCL_7 (2 << 0)
59#define URCL_8 (3 << 0)
60
61/* Modem Control Register */
62#define URMC_URLB (1 << 4) /* Loop-back mode */
63#define URMC_UROUT2 (1 << 3) /* OUT2 signal */
64#define URMC_UROUT1 (1 << 2) /* OUT1 signal */
65#define URMC_URRTS (1 << 1) /* Request to Send */
66#define URMC_URDTR (1 << 0) /* Data Terminal Ready */
67
68/* Line Status Register */
69#define URLS_URRFE (1 << 7) /* Receive FIFO Error */
70#define URLS_URTE (1 << 6) /* Transmit Empty */
71#define URLS_URTHRE (1 << 5) /* Transmit Holding Register Empty */
72#define URLS_URBI (1 << 4) /* Break Interrupt */
73#define URLS_URFE (1 << 3) /* Framing Error */
74#define URLS_URPE (1 << 2) /* Parity Error */
75#define URLS_URROE (1 << 1) /* Receive Overrun Error */
76#define URLS_URDR (1 << 0) /* Receive Data Ready */
77
78/* Modem Status Register */
79#define URMS_URDCD (1 << 7) /* Data Carrier Detect */
80#define URMS_URRI (1 << 6) /* Ring Indicator */
81#define URMS_URDSR (1 << 5) /* Data Set Ready */
82#define URMS_URCTS (1 << 4) /* Clear to Send */
83#define URMS_URDDCD (1 << 3) /* Delta Data Carrier Detect */
84#define URMS_URTERI (1 << 2) /* Trailing Edge Ring Indicator */
85#define URMS_URDDST (1 << 1) /* Delta Data Set Ready */
86#define URMS_URDCTS (1 << 0) /* Delta Clear to Send */
87
88/* Status Register */
89#define USR_UTI (1 << 0) /* Timeout Indication */
90
91
92#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-wan.h b/arch/arm/mach-ks8695/include/mach/regs-wan.h
new file mode 100644
index 000000000000..eb494ec6e956
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-wan.h
@@ -0,0 +1,65 @@
1/*
2 * arch/arm/mach-ks8695/include/mach/regs-wan.h
3 *
4 * Copyright (C) 2006 Andrew Victor
5 *
6 * KS8695 - WAN Registers and bit definitions.
7 *
8 * This file is licensed under the terms of the GNU General Public
9 * License version 2. This program is licensed "as is" without any
10 * warranty of any kind, whether express or implied.
11 */
12
13#ifndef KS8695_WAN_H
14#define KS8695_WAN_H
15
16#define KS8695_WAN_OFFSET (0xF0000 + 0x6000)
17#define KS8695_WAN_VA (KS8695_IO_VA + KS8695_WAN_OFFSET)
18#define KS8695_WAN_PA (KS8695_IO_PA + KS8695_WAN_OFFSET)
19
20
21/*
22 * WAN registers
23 */
24#define KS8695_WMDTXC (0x00) /* DMA Transmit Control */
25#define KS8695_WMDRXC (0x04) /* DMA Receive Control */
26#define KS8695_WMDTSC (0x08) /* DMA Transmit Start Command */
27#define KS8695_WMDRSC (0x0c) /* DMA Receive Start Command */
28#define KS8695_WTDLB (0x10) /* Transmit Descriptor List Base Address */
29#define KS8695_WRDLB (0x14) /* Receive Descriptor List Base Address */
30#define KS8695_WMAL (0x18) /* MAC Station Address Low */
31#define KS8695_WMAH (0x1c) /* MAC Station Address High */
32#define KS8695_WMAAL_(n) (0x80 + ((n)*8)) /* MAC Additional Station Address (0..15) Low */
33#define KS8695_WMAAH_(n) (0x84 + ((n)*8)) /* MAC Additional Station Address (0..15) High */
34
35
36/* DMA Transmit Control Register */
37#define WMDTXC_WMTRST (1 << 31) /* Soft Reset */
38#define WMDTXC_WMTBS (0x3f << 24) /* Transmit Burst Size */
39#define WMDTXC_WMTUCG (1 << 18) /* Transmit UDP Checksum Generate */
40#define WMDTXC_WMTTCG (1 << 17) /* Transmit TCP Checksum Generate */
41#define WMDTXC_WMTICG (1 << 16) /* Transmit IP Checksum Generate */
42#define WMDTXC_WMTFCE (1 << 9) /* Transmit Flow Control Enable */
43#define WMDTXC_WMTLB (1 << 8) /* Loopback mode */
44#define WMDTXC_WMTEP (1 << 2) /* Transmit Enable Padding */
45#define WMDTXC_WMTAC (1 << 1) /* Transmit Add CRC */
46#define WMDTXC_WMTE (1 << 0) /* TX Enable */
47
48/* DMA Receive Control Register */
49#define WMDRXC_WMRBS (0x3f << 24) /* Receive Burst Size */
50#define WMDRXC_WMRUCC (1 << 18) /* Receive UDP Checksum check */
51#define WMDRXC_WMRTCG (1 << 17) /* Receive TCP Checksum check */
52#define WMDRXC_WMRICG (1 << 16) /* Receive IP Checksum check */
53#define WMDRXC_WMRFCE (1 << 9) /* Receive Flow Control Enable */
54#define WMDRXC_WMRB (1 << 6) /* Receive Broadcast */
55#define WMDRXC_WMRM (1 << 5) /* Receive Multicast */
56#define WMDRXC_WMRU (1 << 4) /* Receive Unicast */
57#define WMDRXC_WMRERR (1 << 3) /* Receive Error Frame */
58#define WMDRXC_WMRA (1 << 2) /* Receive All */
59#define WMDRXC_WMRE (1 << 0) /* RX Enable */
60
61/* Additional Station Address High */
62#define WMAAH_E (1 << 31) /* Address Enabled */
63
64
65#endif
diff --git a/arch/arm/mach-ks8695/include/mach/system.h b/arch/arm/mach-ks8695/include/mach/system.h
new file mode 100644
index 000000000000..2a6f91869056
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/system.h
@@ -0,0 +1,48 @@
1/*
2 * arch/arm/mach-s3c2410/include/mach/system.h
3 *
4 * Copyright (C) 2006 Simtec Electronics
5 * Ben Dooks <ben@simtec.co.uk>
6 *
7 * KS8695 - System function defines and includes
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 */
13
14#ifndef __ASM_ARCH_SYSTEM_H
15#define __ASM_ARCH_SYSTEM_H
16
17#include <asm/io.h>
18#include <mach/regs-timer.h>
19
20static void arch_idle(void)
21{
22 /*
23 * This should do all the clock switching
24 * and wait for interrupt tricks,
25 */
26 cpu_do_idle();
27
28}
29
30static void arch_reset(char mode)
31{
32 unsigned int reg;
33
34 if (mode == 's')
35 cpu_reset(0);
36
37 /* disable timer0 */
38 reg = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
39 __raw_writel(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
40
41 /* enable watchdog mode */
42 __raw_writel((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
43
44 /* re-enable timer0 */
45 __raw_writel(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
46}
47
48#endif
diff --git a/arch/arm/mach-ks8695/include/mach/timex.h b/arch/arm/mach-ks8695/include/mach/timex.h
new file mode 100644
index 000000000000..4682e350369b
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/timex.h
@@ -0,0 +1,20 @@
1/*
2 * arch/arm/mach-ks8695/include/mach/timex.h
3 *
4 * Copyright (C) 2006 Simtec Electronics
5 * Ben Dooks <ben@simtec.co.uk>
6 *
7 * KS8695 - Time Parameters
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 */
13
14#ifndef __ASM_ARCH_TIMEX_H
15#define __ASM_ARCH_TIMEX_H
16
17/* timers are derived from MCLK, which is 25MHz */
18#define CLOCK_TICK_RATE 25000000
19
20#endif
diff --git a/arch/arm/mach-ks8695/include/mach/uncompress.h b/arch/arm/mach-ks8695/include/mach/uncompress.h
new file mode 100644
index 000000000000..0eee37a69075
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/uncompress.h
@@ -0,0 +1,37 @@
1/*
2 * arch/arm/mach-ks8695/include/mach/uncompress.h
3 *
4 * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
5 * Copyright (C) 2006 Simtec Electronics
6 *
7 * KS8695 - Kernel uncompressor
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 */
13
14#ifndef __ASM_ARCH_UNCOMPRESS_H
15#define __ASM_ARCH_UNCOMPRESS_H
16
17#include <asm/io.h>
18#include <mach/regs-uart.h>
19
20static void putc(char c)
21{
22 while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTHRE))
23 barrier();
24
25 __raw_writel(c, KS8695_UART_PA + KS8695_URTH);
26}
27
28static inline void flush(void)
29{
30 while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTE))
31 barrier();
32}
33
34#define arch_decomp_setup()
35#define arch_decomp_wdog()
36
37#endif
diff --git a/arch/arm/mach-ks8695/include/mach/vmalloc.h b/arch/arm/mach-ks8695/include/mach/vmalloc.h
new file mode 100644
index 000000000000..744ac66be3a2
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/vmalloc.h
@@ -0,0 +1,19 @@
1/*
2 * arch/arm/mach-ks8695/include/mach/vmalloc.h
3 *
4 * Copyright (C) 2006 Ben Dooks
5 * Copyright (C) 2006 Simtec Electronics <linux@simtec.co.uk>
6 *
7 * KS8695 vmalloc definition
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 */
13
14#ifndef __ASM_ARCH_VMALLOC_H
15#define __ASM_ARCH_VMALLOC_H
16
17#define VMALLOC_END (KS8695_IO_VA & PGDIR_MASK)
18
19#endif
diff --git a/arch/arm/mach-ks8695/irq.c b/arch/arm/mach-ks8695/irq.c
index 0773ae79572e..e5e71f4dbb84 100644
--- a/arch/arm/mach-ks8695/irq.c
+++ b/arch/arm/mach-ks8695/irq.c
@@ -25,14 +25,14 @@
25#include <linux/ioport.h> 25#include <linux/ioport.h>
26#include <linux/sysdev.h> 26#include <linux/sysdev.h>
27 27
28#include <asm/arch/hardware.h> 28#include <mach/hardware.h>
29#include <asm/irq.h> 29#include <asm/irq.h>
30#include <asm/io.h> 30#include <asm/io.h>
31 31
32#include <asm/mach/irq.h> 32#include <asm/mach/irq.h>
33 33
34#include <asm/arch/regs-irq.h> 34#include <mach/regs-irq.h>
35#include <asm/arch/regs-gpio.h> 35#include <mach/regs-gpio.h>
36 36
37static void ks8695_irq_mask(unsigned int irqno) 37static void ks8695_irq_mask(unsigned int irqno)
38{ 38{
diff --git a/arch/arm/mach-ks8695/leds.c b/arch/arm/mach-ks8695/leds.c
index 17c5ef13b0d1..184ef74e4bee 100644
--- a/arch/arm/mach-ks8695/leds.c
+++ b/arch/arm/mach-ks8695/leds.c
@@ -13,8 +13,8 @@
13#include <linux/init.h> 13#include <linux/init.h>
14 14
15#include <asm/leds.h> 15#include <asm/leds.h>
16#include <asm/arch/devices.h> 16#include <mach/devices.h>
17#include <asm/arch/gpio.h> 17#include <mach/gpio.h>
18 18
19 19
20static inline void ks8695_led_on(unsigned int led) 20static inline void ks8695_led_on(unsigned int led)
diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c
index c0c2d5901590..1746c67af176 100644
--- a/arch/arm/mach-ks8695/pci.c
+++ b/arch/arm/mach-ks8695/pci.c
@@ -31,10 +31,10 @@
31#include <asm/io.h> 31#include <asm/io.h>
32#include <asm/signal.h> 32#include <asm/signal.h>
33#include <asm/mach/pci.h> 33#include <asm/mach/pci.h>
34#include <asm/arch/hardware.h> 34#include <mach/hardware.h>
35 35
36#include <asm/arch/devices.h> 36#include <mach/devices.h>
37#include <asm/arch/regs-pci.h> 37#include <mach/regs-pci.h>
38 38
39 39
40static int pci_dbg; 40static int pci_dbg;
diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c
index 02f766b3121d..940888dffc16 100644
--- a/arch/arm/mach-ks8695/time.c
+++ b/arch/arm/mach-ks8695/time.c
@@ -28,8 +28,8 @@
28#include <asm/io.h> 28#include <asm/io.h>
29#include <asm/mach/time.h> 29#include <asm/mach/time.h>
30 30
31#include <asm/arch/regs-timer.h> 31#include <mach/regs-timer.h>
32#include <asm/arch/regs-irq.h> 32#include <mach/regs-irq.h>
33 33
34#include "generic.h" 34#include "generic.h"
35 35
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-03 12:24:22 -0500