ARM: Kirkwood: Convert openblocks A6 board to pinctrl

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

1 files changed, 0 insertions, 44 deletions

diff --git a/arch/arm/mach-kirkwood/board-openblocks_a6.c b/arch/arm/mach-kirkwood/board-openblocks_a6.c
index 815fc6451d52..b11d8fdeca93 100644
--- a/arch/arm/mach-kirkwood/board-openblocks_a6.c
+++ b/arch/arm/mach-kirkwood/board-openblocks_a6.c
@@ -11,60 +11,16 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/clk.h>
-#include <linux/clk-private.h>
 #include "common.h"
-#include "mpp.h"
 
 static struct mv643xx_eth_platform_data openblocks_ge00_data = {
         .phy_addr       = MV643XX_ETH_PHY_ADDR(0),
 };
 
-static unsigned int openblocks_a6_mpp_config[] __initdata = {
-        MPP0_NF_IO2,
-        MPP1_NF_IO3,
-        MPP2_NF_IO4,
-        MPP3_NF_IO5,
-        MPP4_NF_IO6,
-        MPP5_NF_IO7,
-        MPP6_SYSRST_OUTn,
-        MPP8_UART1_RTS,
-        MPP9_UART1_CTS,
-        MPP10_UART0_TXD,
-        MPP11_UART0_RXD,
-        MPP13_UART1_TXD,
-        MPP14_UART1_RXD,
-        MPP15_UART0_RTS,
-        MPP16_UART0_CTS,
-        MPP18_NF_IO0,
-        MPP19_NF_IO1,
-        MPP20_GPIO, /* DIP SW0 */
-        MPP21_GPIO, /* DIP SW1 */
-        MPP22_GPIO, /* DIP SW2 */
-        MPP23_GPIO, /* DIP SW3 */
-        MPP24_GPIO, /* GPIO 0 */
-        MPP25_GPIO, /* GPIO 1 */
-        MPP26_GPIO, /* GPIO 2 */
-        MPP27_GPIO, /* GPIO 3 */
-        MPP28_GPIO, /* GPIO 4 */
-        MPP29_GPIO, /* GPIO 5 */
-        MPP30_GPIO, /* GPIO 6 */
-        MPP31_GPIO, /* GPIO 7 */
-        MPP36_TW1_SDA,
-        MPP37_TW1_SCK,
-        MPP38_GPIO, /* INIT */
-        MPP39_GPIO, /* USB OC */
-        MPP41_GPIO, /* LED: Red */
-        MPP42_GPIO, /* LED: Green */
-        MPP43_GPIO, /* LED: Yellow */
-        0,
-};
-
 void __init openblocks_a6_init(void)
 {
         /*
          * Basic setup. Needs to be called early.
          */
-        kirkwood_mpp_conf(openblocks_a6_mpp_config);
         kirkwood_ge00_init(&openblocks_ge00_data);
 }