Merge branch 'devel-stable' into devel

Conflicts:
	arch/arm/mach-pxa/clock.c
	arch/arm/mach-pxa/clock.h

1 files changed, 14 insertions, 2 deletions

diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index 6710bd7773b8..dc999c4c5806 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -80,15 +80,19 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = {
         MPP11_UART0_RXD,
         MPP13_UART1_TXD,        /* PIC controller */
         MPP14_UART1_RXD,        /* PIC controller */
-        MPP15_GPIO,             /* USB Copy button */
-        MPP16_GPIO,             /* Reset button */
+        MPP15_GPIO,             /* USB Copy button (on devices with 88F6281) */
+        MPP16_GPIO,             /* Reset button (on devices with 88F6281) */
         MPP36_GPIO,             /* RAM: 0: 256 MB, 1: 512 MB */
+        MPP37_GPIO,             /* Reset button (on devices with 88F6282) */
+        MPP43_GPIO,             /* USB Copy button (on devices with 88F6282) */
         MPP44_GPIO,             /* Board ID: 0: TS-11x, 1: TS-21x */
         0
 };
 
 static void __init qnap_ts219_init(void)
 {
+        u32 dev, rev;
+
         /*
          * Basic setup. Needs to be called early.
          */
@@ -100,6 +104,14 @@ static void __init qnap_ts219_init(void)
         qnap_tsx1x_register_flash();
         kirkwood_i2c_init();
         i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1);
+
+        kirkwood_pcie_id(&dev, &rev);
+        if (dev == MV88F6282_DEV_ID) {
+                qnap_ts219_buttons[0].gpio = 43; /* USB Copy button */
+                qnap_ts219_buttons[1].gpio = 37; /* Reset button */
+                qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
+        }
+
         kirkwood_ge00_init(&qnap_ts219_ge00_data);
         kirkwood_sata_init(&qnap_ts219_sata_data);
         kirkwood_ehci_init();