[ARM] Kirkwood: remove duplicated code in LaCie setup files

Signed-off-by: Simon Guinot <sguinot@lacie.com>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>

1 files changed, 9 insertions, 110 deletions

diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
index 2bd14c5079de..aec528d6081f 100644
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
@@ -23,55 +23,18 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/leds.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/time.h>
 #include <mach/kirkwood.h>
-#include <plat/time.h>
 #include "common.h"
 #include "mpp.h"
-
-/*****************************************************************************
- * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
- ****************************************************************************/
-
-static struct mtd_partition netxbig_v2_flash_parts[] = {
-        {
-                .name = "u-boot",
-                .size = MTDPART_SIZ_FULL,
-                .offset = 0,
-                .mask_flags = MTD_WRITEABLE, /* force read-only */
-        },
-};
-
-static const struct flash_platform_data netxbig_v2_flash = {
-        .type           = "mx25l4005a",
-        .name           = "spi_flash",
-        .parts          = netxbig_v2_flash_parts,
-        .nr_parts       = ARRAY_SIZE(netxbig_v2_flash_parts),
-};
-
-static struct spi_board_info __initdata netxbig_v2_spi_slave_info[] = {
-        {
-                .modalias       = "m25p80",
-                .platform_data  = &netxbig_v2_flash,
-                .irq            = -1,
-                .max_speed_hz   = 20000000,
-                .bus_num        = 0,
-                .chip_select    = 0,
-        },
-};
+#include "lacie_v2-common.h"
 
 /*****************************************************************************
  * Ethernet
@@ -86,27 +49,6 @@ static struct mv643xx_eth_platform_data netxbig_v2_ge01_data = {
 };
 
 /*****************************************************************************
- * I2C devices
- ****************************************************************************/
-
-static struct at24_platform_data at24c04 = {
-        .byte_len       = SZ_4K / 8,
-        .page_size      = 16,
-};
-
-/*
- * i2c addr | chip         | description
- * 0x50     | HT24LC04     | eeprom (512B)
- */
-
-static struct i2c_board_info __initdata netxbig_v2_i2c_info[] = {
-        {
-                I2C_BOARD_INFO("24c04", 0x50),
-                .platform_data  = &at24c04,
-        }
-};
-
-/*****************************************************************************
  * SATA
  ****************************************************************************/
 
@@ -114,34 +56,6 @@ static struct mv_sata_platform_data netxbig_v2_sata_data = {
         .n_ports        = 2,
 };
 
-static int __initdata netxbig_v2_gpio_hdd_power[] = { 16, 17, 41, 42, 43 };
-
-static void __init netxbig_v2_sata_power_init(void)
-{
-        int i;
-        int err;
-        int hdd_nb;
-
-        if (machine_is_net2big_v2())
-                hdd_nb = 2;
-        else
-                hdd_nb = 5;
-
-        /* Power up all hard disks. */
-        for (i = 0; i < hdd_nb; i++) {
-                err = gpio_request(netxbig_v2_gpio_hdd_power[i], NULL);
-                if (err == 0) {
-                        err = gpio_direction_output(
-                                        netxbig_v2_gpio_hdd_power[i], 1);
-                        /* Free the HDD power GPIOs. This allow user-space to
-                         * configure them via the gpiolib sysfs interface. */
-                        gpio_free(netxbig_v2_gpio_hdd_power[i]);
-                }
-                if (err)
-                        pr_err("netxbig_v2: failed to power up HDD%d\n", i + 1);
-        }
-}
-
 /*****************************************************************************
  * GPIO keys
  ****************************************************************************/
@@ -246,20 +160,6 @@ static struct platform_device netxbig_v2_gpio_buttons = {
  */
 
 /*****************************************************************************
- * Timer
- ****************************************************************************/
-
-static void netxbig_v2_timer_init(void)
-{
-        kirkwood_tclk = 166666667;
-        orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
-}
-
-struct sys_timer netxbig_v2_timer = {
-        .init = netxbig_v2_timer_init,
-};
-
-/*****************************************************************************
  * General Setup
  ****************************************************************************/
 
@@ -366,7 +266,10 @@ static void __init netxbig_v2_init(void)
         else
                 kirkwood_mpp_conf(net5big_v2_mpp_config);
 
-        netxbig_v2_sata_power_init();
+        if (machine_is_net2big_v2())
+                lacie_v2_hdd_power_init(2);
+        else
+                lacie_v2_hdd_power_init(5);
 
         kirkwood_ehci_init();
         kirkwood_ge00_init(&netxbig_v2_ge00_data);
@@ -374,12 +277,8 @@ static void __init netxbig_v2_init(void)
                 kirkwood_ge01_init(&netxbig_v2_ge01_data);
         kirkwood_sata_init(&netxbig_v2_sata_data);
         kirkwood_uart0_init();
-        spi_register_board_info(netxbig_v2_spi_slave_info,
-                                ARRAY_SIZE(netxbig_v2_spi_slave_info));
-        kirkwood_spi_init();
-        kirkwood_i2c_init();
-        i2c_register_board_info(0, netxbig_v2_i2c_info,
-                                ARRAY_SIZE(netxbig_v2_i2c_info));
+        lacie_v2_register_flash();
+        lacie_v2_register_i2c_devices();
 
         platform_device_register(&netxbig_v2_gpio_buttons);
 
@@ -398,7 +297,7 @@ MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
         .init_machine   = netxbig_v2_init,
         .map_io         = kirkwood_map_io,
         .init_irq       = kirkwood_init_irq,
-        .timer          = &netxbig_v2_timer,
+        .timer          = &lacie_v2_timer,
 MACHINE_END
 #endif
 
@@ -410,6 +309,6 @@ MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
         .init_machine   = netxbig_v2_init,
         .map_io         = kirkwood_map_io,
         .init_irq       = kirkwood_init_irq,
-        .timer          = &netxbig_v2_timer,
+        .timer          = &lacie_v2_timer,
 MACHINE_END
 #endif