Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits)
  MAINTAINERS: EB110ATX is not ebsa110
  MAINTAINERS: update Eric Miao's email address and status
  fb: add support of LCD display controller on pxa168/910 (base layer)
  [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN
  [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
  [ARM] 5544/1: Trust PrimeCell resource sizes
  [ARM] pxa/sharpsl_pm: cleanup of gpio-related code.
  [ARM] pxa/sharpsl_pm: drop set_irq_type calls
  [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
  [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific
  [ARM] sa1100: remove unused collie_pm.c
  [ARM] pxa: fix the conflicting non-static declarations of global_gpios[]
  [ARM] 5550/1: Add default configure file for w90p910 platform
  [ARM] 5549/1: Add clock api for w90p910 platform.
  [ARM] 5548/1: Add gpio api for w90p910 platform
  [ARM] 5551/1: Add multi-function pin api for w90p910 platform.
  [ARM] Make ARM_VIC_NR depend on ARM_VIC
  [ARM] 5546/1: ARM PL022 SSP/SPI driver v3
  ARM: OMAP4: SMP: Update defconfig for OMAP4430
  ARM: OMAP4: SMP: Enable SMP support for OMAP4430
  ...

1 files changed, 159 insertions, 0 deletions

diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index be1ca28fed3f..0f6919838011 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -16,6 +16,7 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/mv643xx_i2c.h>
 #include <linux/ata_platform.h>
+#include <linux/mtd/nand.h>
 #include <linux/spi/orion_spi.h>
 #include <net/dsa.h>
 #include <asm/page.h>
@@ -29,6 +30,7 @@
 #include <plat/mvsdio.h>
 #include <plat/mv_xor.h>
 #include <plat/orion_nand.h>
+#include <plat/orion_wdt.h>
 #include <plat/time.h>
 #include "common.h"
 
@@ -54,6 +56,13 @@ void __init kirkwood_map_io(void)
         iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
 }
 
+/*
+ * Default clock control bits.  Any bit _not_ set in this variable
+ * will be cleared from the hardware after platform devices have been
+ * registered.  Some reserved bits must be set to 1.
+ */
+unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED;
+        
 
 /*****************************************************************************
  * EHCI
@@ -95,6 +104,7 @@ static struct platform_device kirkwood_ehci = {
 
 void __init kirkwood_ehci_init(void)
 {
+        kirkwood_clk_ctrl |= CGC_USB0;
         platform_device_register(&kirkwood_ehci);
 }
 
@@ -151,6 +161,7 @@ static struct platform_device kirkwood_ge00 = {
 
 void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
+        kirkwood_clk_ctrl |= CGC_GE0;
         eth_data->shared = &kirkwood_ge00_shared;
         kirkwood_ge00.dev.platform_data = eth_data;
 
@@ -212,6 +223,7 @@ static struct platform_device kirkwood_ge01 = {
 
 void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
 {
+        kirkwood_clk_ctrl |= CGC_GE1;
         eth_data->shared = &kirkwood_ge01_shared;
         kirkwood_ge01.dev.platform_data = eth_data;
 
@@ -258,6 +270,43 @@ void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq)
 
 
 /*****************************************************************************
+ * NAND flash
+ ****************************************************************************/
+static struct resource kirkwood_nand_resource = {
+        .flags          = IORESOURCE_MEM,
+        .start          = KIRKWOOD_NAND_MEM_PHYS_BASE,
+        .end            = KIRKWOOD_NAND_MEM_PHYS_BASE +
+                                KIRKWOOD_NAND_MEM_SIZE - 1,
+};
+
+static struct orion_nand_data kirkwood_nand_data = {
+        .cle            = 0,
+        .ale            = 1,
+        .width          = 8,
+};
+
+static struct platform_device kirkwood_nand_flash = {
+        .name           = "orion_nand",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &kirkwood_nand_data,
+        },
+        .resource       = &kirkwood_nand_resource,
+        .num_resources  = 1,
+};
+
+void __init kirkwood_nand_init(struct mtd_partition *parts, int nr_parts,
+                               int chip_delay)
+{
+        kirkwood_clk_ctrl |= CGC_RUNIT;
+        kirkwood_nand_data.parts = parts;
+        kirkwood_nand_data.nr_parts = nr_parts;
+        kirkwood_nand_data.chip_delay = chip_delay;
+        platform_device_register(&kirkwood_nand_flash);
+}
+
+
+/*****************************************************************************
  * SoC RTC
  ****************************************************************************/
 static struct resource kirkwood_rtc_resource = {
@@ -301,6 +350,9 @@ static struct platform_device kirkwood_sata = {
 
 void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
 {
+        kirkwood_clk_ctrl |= CGC_SATA0;
+        if (sata_data->n_ports > 1)
+                kirkwood_clk_ctrl |= CGC_SATA1;
         sata_data->dram = &kirkwood_mbus_dram_info;
         kirkwood_sata.dev.platform_data = sata_data;
         platform_device_register(&kirkwood_sata);
@@ -346,6 +398,7 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
         else
                 mvsdio_data->clock = 200000000;
         mvsdio_data->dram = &kirkwood_mbus_dram_info;
+        kirkwood_clk_ctrl |= CGC_SDIO;
         kirkwood_sdio.dev.platform_data = mvsdio_data;
         platform_device_register(&kirkwood_sdio);
 }
@@ -377,6 +430,7 @@ static struct platform_device kirkwood_spi = {
 
 void __init kirkwood_spi_init()
 {
+        kirkwood_clk_ctrl |= CGC_RUNIT;
         platform_device_register(&kirkwood_spi);
 }
 
@@ -507,6 +561,43 @@ void __init kirkwood_uart1_init(void)
 
 
 /*****************************************************************************
+ * Cryptographic Engines and Security Accelerator (CESA)
+ ****************************************************************************/
+
+static struct resource kirkwood_crypto_res[] = {
+        {
+                .name   = "regs",
+                .start  = CRYPTO_PHYS_BASE,
+                .end    = CRYPTO_PHYS_BASE + 0xffff,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .name   = "sram",
+                .start  = KIRKWOOD_SRAM_PHYS_BASE,
+                .end    = KIRKWOOD_SRAM_PHYS_BASE + KIRKWOOD_SRAM_SIZE - 1,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .name   = "crypto interrupt",
+                .start  = IRQ_KIRKWOOD_CRYPTO,
+                .end    = IRQ_KIRKWOOD_CRYPTO,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device kirkwood_crypto_device = {
+        .name           = "mv_crypto",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(kirkwood_crypto_res),
+        .resource       = kirkwood_crypto_res,
+};
+
+void __init kirkwood_crypto_init(void)
+{
+        kirkwood_clk_ctrl |= CGC_CRYPTO;
+        platform_device_register(&kirkwood_crypto_device);
+}
+
+
+/*****************************************************************************
  * XOR
  ****************************************************************************/
 static struct mv_xor_platform_shared_data kirkwood_xor_shared_data = {
@@ -597,6 +688,7 @@ static struct platform_device kirkwood_xor01_channel = {
 
 static void __init kirkwood_xor0_init(void)
 {
+        kirkwood_clk_ctrl |= CGC_XOR0;
         platform_device_register(&kirkwood_xor0_shared);
 
         /*
@@ -695,6 +787,7 @@ static struct platform_device kirkwood_xor11_channel = {
 
 static void __init kirkwood_xor1_init(void)
 {
+        kirkwood_clk_ctrl |= CGC_XOR1;
         platform_device_register(&kirkwood_xor1_shared);
 
         /*
@@ -713,6 +806,29 @@ static void __init kirkwood_xor1_init(void)
 
 
 /*****************************************************************************
+ * Watchdog
+ ****************************************************************************/
+static struct orion_wdt_platform_data kirkwood_wdt_data = {
+        .tclk           = 0,
+};
+
+static struct platform_device kirkwood_wdt_device = {
+        .name           = "orion_wdt",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &kirkwood_wdt_data,
+        },
+        .num_resources  = 0,
+};
+
+static void __init kirkwood_wdt_init(void)
+{
+        kirkwood_wdt_data.tclk = kirkwood_tclk;
+        platform_device_register(&kirkwood_wdt_device);
+}
+
+
+/*****************************************************************************
  * Time handling
  ****************************************************************************/
 int kirkwood_tclk;
@@ -804,6 +920,49 @@ void __init kirkwood_init(void)
 
         /* internal devices that every board has */
         kirkwood_rtc_init();
+        kirkwood_wdt_init();
         kirkwood_xor0_init();
         kirkwood_xor1_init();
+        kirkwood_crypto_init();
+}
+
+static int __init kirkwood_clock_gate(void)
+{
+        unsigned int curr = readl(CLOCK_GATING_CTRL);
+
+        printk(KERN_DEBUG "Gating clock of unused units\n");
+        printk(KERN_DEBUG "before: 0x%08x\n", curr);
+
+        /* Make sure those units are accessible */
+        writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0, CLOCK_GATING_CTRL);
+
+        /* For SATA: first shutdown the phy */
+        if (!(kirkwood_clk_ctrl & CGC_SATA0)) {
+                /* Disable PLL and IVREF */
+                writel(readl(SATA0_PHY_MODE_2) & ~0xf, SATA0_PHY_MODE_2);
+                /* Disable PHY */
+                writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL);
+        }
+        if (!(kirkwood_clk_ctrl & CGC_SATA1)) {
+                /* Disable PLL and IVREF */
+                writel(readl(SATA1_PHY_MODE_2) & ~0xf, SATA1_PHY_MODE_2);
+                /* Disable PHY */
+                writel(readl(SATA1_IF_CTRL) | 0x200, SATA1_IF_CTRL);
+        }
+        
+        /* For PCIe: first shutdown the phy */
+        if (!(kirkwood_clk_ctrl & CGC_PEX0)) {
+                writel(readl(PCIE_LINK_CTRL) | 0x10, PCIE_LINK_CTRL);
+                while (1)
+                        if (readl(PCIE_STATUS) & 0x1)
+                                break;
+                writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL);
+        }
+
+        /* Now gate clock the required units */
+        writel(kirkwood_clk_ctrl, CLOCK_GATING_CTRL);
+        printk(KERN_DEBUG " after: 0x%08x\n", readl(CLOCK_GATING_CTRL));
+
+        return 0;
 }
+late_initcall(kirkwood_clock_gate);