ARM: kirkwood: Add support for RaidSonic IB-NAS6210/6220 using devicetree

Add support for the IB-NAS6210 and IB-NAS 6220. Describe as much as
currently possible in the devicetree files, including the NAND partitions.
Use the partition scheme of the original firmware by default.

Create a board-ib62x0.c for everything else.

Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

1 files changed, 143 insertions, 0 deletions

diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c
new file mode 100644
index 000000000000..eddf1df8891f
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-ib62x0.c
@@ -0,0 +1,143 @@
+/*
+ * Copyright 2012 (C), Simon Baatz <gmbnomis@gmail.com>
+ *
+ * arch/arm/mach-kirkwood/board-ib62x0.c
+ *
+ * RaidSonic ICY BOX IB-NAS6210 & IB-NAS6220 init for drivers not
+ * converted to flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+#define IB62X0_GPIO_POWER_OFF   24
+
+static struct mv643xx_eth_platform_data ib62x0_ge00_data = {
+        .phy_addr       = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data ib62x0_sata_data = {
+        .n_ports        = 2,
+};
+
+static unsigned int ib62x0_mpp_config[] __initdata = {
+        MPP0_NF_IO2,
+        MPP1_NF_IO3,
+        MPP2_NF_IO4,
+        MPP3_NF_IO5,
+        MPP4_NF_IO6,
+        MPP5_NF_IO7,
+        MPP18_NF_IO0,
+        MPP19_NF_IO1,
+        MPP22_GPIO,     /* OS LED red */
+        MPP24_GPIO,     /* Power off device */
+        MPP25_GPIO,     /* OS LED green */
+        MPP27_GPIO,     /* USB transfer LED */
+        MPP28_GPIO,     /* Reset button */
+        MPP29_GPIO,     /* USB Copy button */
+        0
+};
+
+static struct gpio_led ib62x0_led_pins[] = {
+        {
+                .name                   = "ib62x0:green:os",
+                .default_trigger        = "default-on",
+                .gpio                   = 25,
+                .active_low             = 0,
+        },
+        {
+                .name                   = "ib62x0:red:os",
+                .default_trigger        = "none",
+                .gpio                   = 22,
+                .active_low             = 0,
+        },
+        {
+                .name                   = "ib62x0:red:usb_copy",
+                .default_trigger        = "none",
+                .gpio                   = 27,
+                .active_low             = 0,
+        },
+};
+
+static struct gpio_led_platform_data ib62x0_led_data = {
+        .leds           = ib62x0_led_pins,
+        .num_leds       = ARRAY_SIZE(ib62x0_led_pins),
+};
+
+static struct platform_device ib62x0_led_device = {
+        .name   = "leds-gpio",
+        .id     = -1,
+        .dev    = {
+                .platform_data  = &ib62x0_led_data,
+        }
+};
+
+static struct gpio_keys_button ib62x0_button_pins[] = {
+        {
+                .code           = KEY_COPY,
+                .gpio           = 29,
+                .desc           = "USB Copy",
+                .active_low     = 1,
+        },
+        {
+                .code           = KEY_RESTART,
+                .gpio           = 28,
+                .desc           = "Reset",
+                .active_low     = 1,
+        },
+};
+
+static struct gpio_keys_platform_data ib62x0_button_data = {
+        .buttons        = ib62x0_button_pins,
+        .nbuttons       = ARRAY_SIZE(ib62x0_button_pins),
+};
+
+static struct platform_device ib62x0_button_device = {
+        .name           = "gpio-keys",
+        .id             = -1,
+        .num_resources  = 0,
+        .dev            = {
+                .platform_data  = &ib62x0_button_data,
+        }
+};
+
+static void ib62x0_power_off(void)
+{
+        gpio_set_value(IB62X0_GPIO_POWER_OFF, 1);
+}
+
+void __init ib62x0_init(void)
+{
+        /*
+         * Basic setup. Needs to be called early.
+         */
+        kirkwood_mpp_conf(ib62x0_mpp_config);
+
+        kirkwood_ehci_init();
+        kirkwood_ge00_init(&ib62x0_ge00_data);
+        kirkwood_sata_init(&ib62x0_sata_data);
+        platform_device_register(&ib62x0_led_device);
+        platform_device_register(&ib62x0_button_device);
+        if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 &&
+            gpio_direction_output(IB62X0_GPIO_POWER_OFF, 0) == 0)
+                pm_power_off = ib62x0_power_off;
+        else
+                pr_err("board-ib62x0: failed to configure power-off GPIO\n");
+}