Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 353 insertions, 0 deletions

diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
new file mode 100644
index 000000000000..267ba02d77dc
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -0,0 +1,353 @@
+/*
+ * arch/arm/mach-ixp4xx/common.c
+ *
+ * Generic code shared across all IXP4XX platforms
+ *
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2002 (c) Intel Corporation
+ * Copyright 2003-2004 (c) MontaVista, Software, Inc. 
+ * 
+ * This file is licensed under  the terms of the GNU General Public 
+ * License version 2. This program is licensed "as is" without any 
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/sched.h>
+#include <linux/tty.h>
+#include <linux/serial_core.h>
+#include <linux/bootmem.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+
+#include <asm/hardware.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/irq.h>
+
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+
+enum ixp4xx_irq_type {
+        IXP4XX_IRQ_LEVEL, IXP4XX_IRQ_EDGE
+};
+static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type);
+
+/*************************************************************************
+ * GPIO acces functions
+ *************************************************************************/
+
+/*
+ * Configure GPIO line for input, interrupt, or output operation
+ *
+ * TODO: Enable/disable the irq_desc based on interrupt or output mode.
+ * TODO: Should these be named ixp4xx_gpio_?
+ */
+void gpio_line_config(u8 line, u32 style)
+{
+        static const int gpio2irq[] = {
+                6, 7, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29
+        };
+        u32 enable;
+        volatile u32 *int_reg;
+        u32 int_style;
+        enum ixp4xx_irq_type irq_type;
+
+        enable = *IXP4XX_GPIO_GPOER;
+
+        if (style & IXP4XX_GPIO_OUT) {
+                enable &= ~((1) << line);
+        } else if (style & IXP4XX_GPIO_IN) {
+                enable |= ((1) << line);
+
+                switch (style & IXP4XX_GPIO_INTSTYLE_MASK)
+                {
+                case (IXP4XX_GPIO_ACTIVE_HIGH):
+                        int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
+                        irq_type = IXP4XX_IRQ_LEVEL;
+                        break;
+                case (IXP4XX_GPIO_ACTIVE_LOW):
+                        int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
+                        irq_type = IXP4XX_IRQ_LEVEL;
+                        break;
+                case (IXP4XX_GPIO_RISING_EDGE):
+                        int_style = IXP4XX_GPIO_STYLE_RISING_EDGE;
+                        irq_type = IXP4XX_IRQ_EDGE;
+                        break;
+                case (IXP4XX_GPIO_FALLING_EDGE):
+                        int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE;
+                        irq_type = IXP4XX_IRQ_EDGE;
+                        break;
+                case (IXP4XX_GPIO_TRANSITIONAL):
+                        int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL;
+                        irq_type = IXP4XX_IRQ_EDGE;
+                        break;
+                default:
+                        int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
+                        irq_type = IXP4XX_IRQ_LEVEL;
+                        break;
+                }
+
+                if (style & IXP4XX_GPIO_INTSTYLE_MASK)
+                        ixp4xx_config_irq(gpio2irq[line], irq_type);
+
+                if (line >= 8) {        /* pins 8-15 */ 
+                        line -= 8;
+                        int_reg = IXP4XX_GPIO_GPIT2R;
+                }
+                else {                  /* pins 0-7 */
+                        int_reg = IXP4XX_GPIO_GPIT1R;
+                }
+
+                /* Clear the style for the appropriate pin */
+                *int_reg &= ~(IXP4XX_GPIO_STYLE_CLEAR << 
+                                (line * IXP4XX_GPIO_STYLE_SIZE));
+
+                /* Set the new style */
+                *int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE));
+        }
+
+        *IXP4XX_GPIO_GPOER = enable;
+}
+
+EXPORT_SYMBOL(gpio_line_config);
+
+/*************************************************************************
+ * IXP4xx chipset I/O mapping
+ *************************************************************************/
+static struct map_desc ixp4xx_io_desc[] __initdata = {
+        {       /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACs, USB .... */
+                .virtual        = IXP4XX_PERIPHERAL_BASE_VIRT,
+                .physical       = IXP4XX_PERIPHERAL_BASE_PHYS,
+                .length         = IXP4XX_PERIPHERAL_REGION_SIZE,
+                .type           = MT_DEVICE
+        }, {    /* Expansion Bus Config Registers */
+                .virtual        = IXP4XX_EXP_CFG_BASE_VIRT,
+                .physical       = IXP4XX_EXP_CFG_BASE_PHYS,
+                .length         = IXP4XX_EXP_CFG_REGION_SIZE,
+                .type           = MT_DEVICE
+        }, {    /* PCI Registers */
+                .virtual        = IXP4XX_PCI_CFG_BASE_VIRT,
+                .physical       = IXP4XX_PCI_CFG_BASE_PHYS,
+                .length         = IXP4XX_PCI_CFG_REGION_SIZE,
+                .type           = MT_DEVICE
+        }
+};
+
+void __init ixp4xx_map_io(void)
+{
+        iotable_init(ixp4xx_io_desc, ARRAY_SIZE(ixp4xx_io_desc));
+}
+
+
+/*************************************************************************
+ * IXP4xx chipset IRQ handling
+ *
+ * TODO: GPIO IRQs should be marked invalid until the user of the IRQ
+ *       (be it PCI or something else) configures that GPIO line
+ *       as an IRQ.
+ **************************************************************************/
+static void ixp4xx_irq_mask(unsigned int irq)
+{
+        if (cpu_is_ixp46x() && irq >= 32)
+                *IXP4XX_ICMR2 &= ~(1 << (irq - 32));
+        else
+                *IXP4XX_ICMR &= ~(1 << irq);
+}
+
+static void ixp4xx_irq_unmask(unsigned int irq)
+{
+        if (cpu_is_ixp46x() && irq >= 32)
+                *IXP4XX_ICMR2 |= (1 << (irq - 32));
+        else
+                *IXP4XX_ICMR |= (1 << irq);
+}
+
+static void ixp4xx_irq_ack(unsigned int irq)
+{
+        static int irq2gpio[32] = {
+                -1, -1, -1, -1, -1, -1,  0,  1,
+                -1, -1, -1, -1, -1, -1, -1, -1,
+                -1, -1, -1,  2,  3,  4,  5,  6,
+                 7,  8,  9, 10, 11, 12, -1, -1,
+        };
+        int line = (irq < 32) ? irq2gpio[irq] : -1;
+
+        if (line >= 0)
+                gpio_line_isr_clear(line);
+}
+
+/*
+ * Level triggered interrupts on GPIO lines can only be cleared when the
+ * interrupt condition disappears.
+ */
+static void ixp4xx_irq_level_unmask(unsigned int irq)
+{
+        ixp4xx_irq_ack(irq);
+        ixp4xx_irq_unmask(irq);
+}
+
+static struct irqchip ixp4xx_irq_level_chip = {
+        .ack    = ixp4xx_irq_mask,
+        .mask   = ixp4xx_irq_mask,
+        .unmask = ixp4xx_irq_level_unmask,
+};
+
+static struct irqchip ixp4xx_irq_edge_chip = {
+        .ack    = ixp4xx_irq_ack,
+        .mask   = ixp4xx_irq_mask,
+        .unmask = ixp4xx_irq_unmask,
+};
+
+static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type)
+{
+        switch (type) {
+        case IXP4XX_IRQ_LEVEL:
+                set_irq_chip(irq, &ixp4xx_irq_level_chip);
+                set_irq_handler(irq, do_level_IRQ);
+                break;
+        case IXP4XX_IRQ_EDGE:
+                set_irq_chip(irq, &ixp4xx_irq_edge_chip);
+                set_irq_handler(irq, do_edge_IRQ);
+                break;
+        }
+        set_irq_flags(irq, IRQF_VALID);
+}
+
+void __init ixp4xx_init_irq(void)
+{
+        int i = 0;
+
+        /* Route all sources to IRQ instead of FIQ */
+        *IXP4XX_ICLR = 0x0;
+
+        /* Disable all interrupt */
+        *IXP4XX_ICMR = 0x0; 
+
+        if (cpu_is_ixp46x()) {
+                /* Route upper 32 sources to IRQ instead of FIQ */
+                *IXP4XX_ICLR2 = 0x00;
+
+                /* Disable upper 32 interrupts */
+                *IXP4XX_ICMR2 = 0x00;
+        }
+
+        /* Default to all level triggered */
+        for(i = 0; i < NR_IRQS; i++)
+                ixp4xx_config_irq(i, IXP4XX_IRQ_LEVEL);
+}
+
+
+/*************************************************************************
+ * IXP4xx timer tick
+ * We use OS timer1 on the CPU for the timer tick and the timestamp 
+ * counter as a source of real clock ticks to account for missed jiffies.
+ *************************************************************************/
+
+static unsigned volatile last_jiffy_time;
+
+#define CLOCK_TICKS_PER_USEC    ((CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
+
+/* IRQs are disabled before entering here from do_gettimeofday() */
+static unsigned long ixp4xx_gettimeoffset(void)
+{
+        u32 elapsed;
+
+        elapsed = *IXP4XX_OSTS - last_jiffy_time;
+
+        return elapsed / CLOCK_TICKS_PER_USEC;
+}
+
+static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+        write_seqlock(&xtime_lock);
+
+        /* Clear Pending Interrupt by writing '1' to it */
+        *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
+
+        /*
+         * Catch up with the real idea of time
+         */
+        while ((*IXP4XX_OSTS - last_jiffy_time) > LATCH) {
+                timer_tick(regs);
+                last_jiffy_time += LATCH;
+        }
+
+        write_sequnlock(&xtime_lock);
+
+        return IRQ_HANDLED;
+}
+
+static struct irqaction ixp4xx_timer_irq = {
+        .name           = "IXP4xx Timer Tick",
+        .flags          = SA_INTERRUPT,
+        .handler        = ixp4xx_timer_interrupt
+};
+
+static void __init ixp4xx_timer_init(void)
+{
+        /* Clear Pending Interrupt by writing '1' to it */
+        *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
+
+        /* Setup the Timer counter value */
+        *IXP4XX_OSRT1 = (LATCH & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
+
+        /* Reset time-stamp counter */
+        *IXP4XX_OSTS = 0;
+        last_jiffy_time = 0;
+
+        /* Connect the interrupt handler and enable the interrupt */
+        setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq);
+}
+
+struct sys_timer ixp4xx_timer = {
+        .init           = ixp4xx_timer_init,
+        .offset         = ixp4xx_gettimeoffset,
+};
+
+static struct resource ixp46x_i2c_resources[] = {
+        [0] = {
+                .start  = 0xc8011000,
+                .end    = 0xc801101c,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = IRQ_IXP4XX_I2C,
+                .end    = IRQ_IXP4XX_I2C,
+                .flags  = IORESOURCE_IRQ
+        }
+};
+
+/*
+ * I2C controller. The IXP46x uses the same block as the IOP3xx, so
+ * we just use the same device name.
+ */
+static struct platform_device ixp46x_i2c_controller = {
+        .name           = "IOP3xx-I2C",
+        .id             = 0,
+        .num_resources  = 2,
+        .resource       = ixp46x_i2c_resources
+};
+
+static struct platform_device *ixp46x_devices[] __initdata = {
+        &ixp46x_i2c_controller
+};
+
+void __init ixp4xx_sys_init(void)
+{
+        if (cpu_is_ixp46x()) {
+                platform_add_devices(ixp46x_devices,
+                                ARRAY_SIZE(ixp46x_devices));
+        }
+}
+