Merge with temp tree to get David's gdb inferior calls patch

1 files changed, 134 insertions, 13 deletions

diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c
index c4683aaff84a..aec13c7108a9 100644
--- a/arch/arm/mach-ixp2000/ixdp2800.c
+++ b/arch/arm/mach-ixp2000/ixdp2800.c
@@ -65,19 +65,102 @@ static struct sys_timer ixdp2800_timer = {
 /*************************************************************************
  * IXDP2800 PCI
  *************************************************************************/
+static void __init ixdp2800_slave_disable_pci_master(void)
+{
+        *IXP2000_PCI_CMDSTAT &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+}
+
+static void __init ixdp2800_master_wait_for_slave(void)
+{
+        volatile u32 *addr;
+
+        printk(KERN_INFO "IXDP2800: waiting for slave NPU to configure "
+                         "its BAR sizes\n");
+
+        addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN,
+                                        PCI_BASE_ADDRESS_1);
+        do {
+                *addr = 0xffffffff;
+                cpu_relax();
+        } while (*addr != 0xfe000008);
+
+        addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN,
+                                        PCI_BASE_ADDRESS_2);
+        do {
+                *addr = 0xffffffff;
+                cpu_relax();
+        } while (*addr != 0xc0000008);
+
+        /*
+         * Configure the slave's SDRAM BAR by hand.
+         */
+        *addr = 0x40000008;
+}
+
+static void __init ixdp2800_slave_wait_for_master_enable(void)
+{
+        printk(KERN_INFO "IXDP2800: waiting for master NPU to enable us\n");
+
+        while ((*IXP2000_PCI_CMDSTAT & PCI_COMMAND_MASTER) == 0)
+                cpu_relax();
+}
+
 void __init ixdp2800_pci_preinit(void)
 {
         printk("ixdp2x00_pci_preinit called\n");
 
-        *IXP2000_PCI_ADDR_EXT =  0x0000e000;
+        *IXP2000_PCI_ADDR_EXT = 0x0001e000;
+
+        if (!ixdp2x00_master_npu())
+                ixdp2800_slave_disable_pci_master();
 
-        *IXP2000_PCI_DRAM_BASE_ADDR_MASK = (0x40000000 - 1) & ~0xfffff;
         *IXP2000_PCI_SRAM_BASE_ADDR_MASK = (0x2000000 - 1) & ~0x3ffff;
+        *IXP2000_PCI_DRAM_BASE_ADDR_MASK = (0x40000000 - 1) & ~0xfffff;
 
         ixp2000_pci_preinit();
+
+        if (ixdp2x00_master_npu()) {
+                /*
+                 * Wait until the slave set its SRAM/SDRAM BAR sizes
+                 * correctly before we proceed to scan and enumerate
+                 * the bus.
+                 */
+                ixdp2800_master_wait_for_slave();
+
+                /*
+                 * We configure the SDRAM BARs by hand because they
+                 * are 1G and fall outside of the regular allocated
+                 * PCI address space.
+                 */
+                *IXP2000_PCI_SDRAM_BAR = 0x00000008;
+        } else {
+                /*
+                 * Wait for the master to complete scanning the bus
+                 * and assigning resources before we proceed to scan
+                 * the bus ourselves.  Set pci=firmware to honor the
+                 * master's resource assignment.
+                 */
+                ixdp2800_slave_wait_for_master_enable();
+                pcibios_setup("firmware");
+        }
 }
 
-int ixdp2800_pci_setup(int nr, struct pci_sys_data *sys)
+/*
+ * We assign the SDRAM BARs for the two IXP2800 CPUs by hand, outside
+ * of the regular PCI window, because there's only 512M of outbound PCI
+ * memory window on each IXP, while we need 1G for each of the BARs.
+ */
+static void __devinit ixp2800_pci_fixup(struct pci_dev *dev)
+{
+        if (machine_is_ixdp2800()) {
+                dev->resource[2].start = 0;
+                dev->resource[2].end   = 0;
+                dev->resource[2].flags = 0;
+        }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IXP2800, ixp2800_pci_fixup);
+
+static int __init ixdp2800_pci_setup(int nr, struct pci_sys_data *sys)
 {
         sys->mem_offset = 0x00000000;
 
@@ -129,22 +212,47 @@ static int __init ixdp2800_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
         } else return IRQ_IXP2000_PCIB; /* Slave NIC interrupt */
 }
 
-static void ixdp2800_pci_postinit(void)
+static void __init ixdp2800_master_enable_slave(void)
 {
-        struct pci_dev *dev;
+        volatile u32 *addr;
 
-        if (ixdp2x00_master_npu()) {
-                dev = pci_find_slot(1, IXDP2800_SLAVE_ENET_DEVFN);
-                pci_remove_bus_device(dev);
-        } else {
-                dev = pci_find_slot(1, IXDP2800_MASTER_ENET_DEVFN);
-                pci_remove_bus_device(dev);
+        printk(KERN_INFO "IXDP2800: enabling slave NPU\n");
+
+        addr = (volatile u32 *)ixp2000_pci_config_addr(0,
+                                        IXDP2X00_SLAVE_NPU_DEVFN,
+                                        PCI_COMMAND);
+
+        *addr |= PCI_COMMAND_MASTER;
+}
 
+static void __init ixdp2800_master_wait_for_slave_bus_scan(void)
+{
+        volatile u32 *addr;
+
+        printk(KERN_INFO "IXDP2800: waiting for slave to finish bus scan\n");
+
+        addr = (volatile u32 *)ixp2000_pci_config_addr(0,
+                                        IXDP2X00_SLAVE_NPU_DEVFN,
+                                        PCI_COMMAND);
+        while ((*addr & PCI_COMMAND_MEMORY) == 0)
+                cpu_relax();
+}
+
+static void __init ixdp2800_slave_signal_bus_scan_completion(void)
+{
+        printk(KERN_INFO "IXDP2800: bus scan done, signaling master\n");
+        *IXP2000_PCI_CMDSTAT |= PCI_COMMAND_MEMORY;
+}
+
+static void __init ixdp2800_pci_postinit(void)
+{
+        if (!ixdp2x00_master_npu()) {
                 ixdp2x00_slave_pci_postinit();
+                ixdp2800_slave_signal_bus_scan_completion();
         }
 }
 
-struct hw_pci ixdp2800_pci __initdata = {
+struct __initdata hw_pci ixdp2800_pci __initdata = {
         .nr_controllers = 1,
         .setup          = ixdp2800_pci_setup,
         .preinit        = ixdp2800_pci_preinit,
@@ -155,8 +263,21 @@ struct hw_pci ixdp2800_pci __initdata = {
 
 int __init ixdp2800_pci_init(void)
 {
-        if (machine_is_ixdp2800())
+        if (machine_is_ixdp2800()) {
+                struct pci_dev *dev;
+
                 pci_common_init(&ixdp2800_pci);
+                if (ixdp2x00_master_npu()) {
+                        dev = pci_find_slot(1, IXDP2800_SLAVE_ENET_DEVFN);
+                        pci_remove_bus_device(dev);
+
+                        ixdp2800_master_enable_slave();
+                        ixdp2800_master_wait_for_slave_bus_scan();
+                } else {
+                        dev = pci_find_slot(1, IXDP2800_MASTER_ENET_DEVFN);
+                        pci_remove_bus_device(dev);
+                }
+        }
 
         return 0;
 }