Merge tag 'arm-soc-imx-move' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Consolidate i.MX 5 platforms to be under the new shared i.MX 3/5/6 tree.

* tag 'arm-soc-imx-move' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM i.MX: Update defconfig
  ARM i.MX: Merge i.MX5 support into mach-imx
  ARM i.MX5: remove unnecessary includes from board files

Fix up fairly trivial conflicts due to various changes nearby in
arch/arm/{mach,plat}-imx/{Kconfig,Makefile}

Pull request had been sent to the wrong email address, but happened
before the merge window closed.  I'm merging the MX 5 consolidation,
since it apparently will help the next development window and will avoid
conflicts later as per Arnd.

1 files changed, 296 insertions, 0 deletions

diff --git a/arch/arm/mach-imx/mach-mx51_efikamx.c b/arch/arm/mach-imx/mach-mx51_efikamx.c
new file mode 100644
index 000000000000..3a5ed2dd885a
--- /dev/null
+++ b/arch/arm/mach-imx/mach-mx51_efikamx.c
@@ -0,0 +1,296 @@
+/*
+ * Copyright (C) 2010 Linaro Limited
+ *
+ * based on code from the following
+ * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
+ * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/mfd/mc13892.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/consumer.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx51.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "devices-imx51.h"
+#include "efika.h"
+
+#define EFIKAMX_PCBID0          IMX_GPIO_NR(3, 16)
+#define EFIKAMX_PCBID1          IMX_GPIO_NR(3, 17)
+#define EFIKAMX_PCBID2          IMX_GPIO_NR(3, 11)
+
+#define EFIKAMX_BLUE_LED        IMX_GPIO_NR(3, 13)
+#define EFIKAMX_GREEN_LED       IMX_GPIO_NR(3, 14)
+#define EFIKAMX_RED_LED         IMX_GPIO_NR(3, 15)
+
+#define EFIKAMX_POWER_KEY       IMX_GPIO_NR(2, 31)
+
+/* board 1.1 doesn't have same reset gpio */
+#define EFIKAMX_RESET1_1        IMX_GPIO_NR(3, 2)
+#define EFIKAMX_RESET           IMX_GPIO_NR(1, 4)
+
+#define EFIKAMX_POWEROFF        IMX_GPIO_NR(4, 13)
+
+#define EFIKAMX_PMIC            IMX_GPIO_NR(1, 6)
+
+/* the pci ids pin have pull up. they're driven low according to board id */
+#define MX51_PAD_PCBID0 IOMUX_PAD(0x518, 0x130, 3, 0x0,   0, PAD_CTL_PUS_100K_UP)
+#define MX51_PAD_PCBID1 IOMUX_PAD(0x51C, 0x134, 3, 0x0,   0, PAD_CTL_PUS_100K_UP)
+#define MX51_PAD_PCBID2 IOMUX_PAD(0x504, 0x128, 3, 0x0,   0, PAD_CTL_PUS_100K_UP)
+#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0,   0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
+
+static iomux_v3_cfg_t mx51efikamx_pads[] = {
+        /* board id */
+        MX51_PAD_PCBID0,
+        MX51_PAD_PCBID1,
+        MX51_PAD_PCBID2,
+
+        /* leds */
+        MX51_PAD_CSI1_D9__GPIO3_13,
+        MX51_PAD_CSI1_VSYNC__GPIO3_14,
+        MX51_PAD_CSI1_HSYNC__GPIO3_15,
+
+        /* power key */
+        MX51_PAD_PWRKEY,
+
+        /* reset */
+        MX51_PAD_DI1_PIN13__GPIO3_2,
+        MX51_PAD_GPIO1_4__GPIO1_4,
+
+        /* power off */
+        MX51_PAD_CSI2_VSYNC__GPIO4_13,
+};
+
+/*   PCBID2  PCBID1 PCBID0  STATE
+        1       1      1    ER1:rev1.1
+        1       1      0    ER2:rev1.2
+        1       0      1    ER3:rev1.3
+        1       0      0    ER4:rev1.4
+*/
+static void __init mx51_efikamx_board_id(void)
+{
+        int id;
+
+        /* things are taking time to settle */
+        msleep(150);
+
+        gpio_request(EFIKAMX_PCBID0, "pcbid0");
+        gpio_direction_input(EFIKAMX_PCBID0);
+        gpio_request(EFIKAMX_PCBID1, "pcbid1");
+        gpio_direction_input(EFIKAMX_PCBID1);
+        gpio_request(EFIKAMX_PCBID2, "pcbid2");
+        gpio_direction_input(EFIKAMX_PCBID2);
+
+        id = gpio_get_value(EFIKAMX_PCBID0) ? 1 : 0;
+        id |= (gpio_get_value(EFIKAMX_PCBID1) ? 1 : 0) << 1;
+        id |= (gpio_get_value(EFIKAMX_PCBID2) ? 1 : 0) << 2;
+
+        switch (id) {
+        case 7:
+                system_rev = 0x11;
+                break;
+        case 6:
+                system_rev = 0x12;
+                break;
+        case 5:
+                system_rev = 0x13;
+                break;
+        case 4:
+                system_rev = 0x14;
+                break;
+        default:
+                system_rev = 0x10;
+                break;
+        }
+
+        if ((system_rev == 0x10)
+                || (system_rev == 0x12)
+                || (system_rev == 0x14)) {
+                printk(KERN_WARNING
+                        "EfikaMX: Unsupported board revision 1.%u!\n",
+                        system_rev & 0xf);
+        }
+}
+
+static struct gpio_led mx51_efikamx_leds[] __initdata = {
+        {
+                .name = "efikamx:green",
+                .default_trigger = "default-on",
+                .gpio = EFIKAMX_GREEN_LED,
+        },
+        {
+                .name = "efikamx:red",
+                .default_trigger = "ide-disk",
+                .gpio = EFIKAMX_RED_LED,
+        },
+        {
+                .name = "efikamx:blue",
+                .default_trigger = "mmc0",
+                .gpio = EFIKAMX_BLUE_LED,
+        },
+};
+
+static const struct gpio_led_platform_data
+                mx51_efikamx_leds_data __initconst = {
+        .leds = mx51_efikamx_leds,
+        .num_leds = ARRAY_SIZE(mx51_efikamx_leds),
+};
+
+static struct esdhc_platform_data sd_pdata = {
+        .cd_type = ESDHC_CD_CONTROLLER,
+        .wp_type = ESDHC_WP_CONTROLLER,
+};
+
+static struct gpio_keys_button mx51_efikamx_powerkey[] = {
+        {
+                .code = KEY_POWER,
+                .gpio = EFIKAMX_POWER_KEY,
+                .type = EV_PWR,
+                .desc = "Power Button (CM)",
+                .wakeup = 1,
+                .debounce_interval = 10, /* ms */
+        },
+};
+
+static const struct gpio_keys_platform_data mx51_efikamx_powerkey_data __initconst = {
+        .buttons = mx51_efikamx_powerkey,
+        .nbuttons = ARRAY_SIZE(mx51_efikamx_powerkey),
+};
+
+static void mx51_efikamx_restart(char mode, const char *cmd)
+{
+        if (system_rev == 0x11)
+                gpio_direction_output(EFIKAMX_RESET1_1, 0);
+        else
+                gpio_direction_output(EFIKAMX_RESET, 0);
+}
+
+static struct regulator *pwgt1, *pwgt2, *coincell;
+
+static void mx51_efikamx_power_off(void)
+{
+        if (!IS_ERR(coincell))
+                regulator_disable(coincell);
+
+        if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
+                regulator_disable(pwgt2);
+                regulator_disable(pwgt1);
+        }
+        gpio_direction_output(EFIKAMX_POWEROFF, 1);
+}
+
+static int __init mx51_efikamx_power_init(void)
+{
+        if (machine_is_mx51_efikamx()) {
+                pwgt1 = regulator_get(NULL, "pwgt1");
+                pwgt2 = regulator_get(NULL, "pwgt2");
+                if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
+                        regulator_enable(pwgt1);
+                        regulator_enable(pwgt2);
+                }
+                gpio_request(EFIKAMX_POWEROFF, "poweroff");
+                pm_power_off = mx51_efikamx_power_off;
+
+                /* enable coincell charger. maybe need a small power driver ? */
+                coincell = regulator_get(NULL, "coincell");
+                if (!IS_ERR(coincell)) {
+                        regulator_set_voltage(coincell, 3000000, 3000000);
+                        regulator_enable(coincell);
+                }
+
+                regulator_has_full_constraints();
+        }
+
+        return 0;
+}
+late_initcall(mx51_efikamx_power_init);
+
+static void __init mx51_efikamx_init(void)
+{
+        imx51_soc_init();
+
+        mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
+                                        ARRAY_SIZE(mx51efikamx_pads));
+        efika_board_common_init();
+
+        mx51_efikamx_board_id();
+
+        /* on < 1.2 boards both SD controllers are used */
+        if (system_rev < 0x12) {
+                imx51_add_sdhci_esdhc_imx(0, NULL);
+                imx51_add_sdhci_esdhc_imx(1, &sd_pdata);
+                mx51_efikamx_leds[2].default_trigger = "mmc1";
+        } else
+                imx51_add_sdhci_esdhc_imx(0, &sd_pdata);
+
+        gpio_led_register_device(-1, &mx51_efikamx_leds_data);
+        imx_add_gpio_keys(&mx51_efikamx_powerkey_data);
+
+        if (system_rev == 0x11) {
+                gpio_request(EFIKAMX_RESET1_1, "reset");
+                gpio_direction_output(EFIKAMX_RESET1_1, 1);
+        } else {
+                gpio_request(EFIKAMX_RESET, "reset");
+                gpio_direction_output(EFIKAMX_RESET, 1);
+        }
+
+        /*
+         * enable wifi by default only on mx
+         * sb and mx have same wlan pin but the value to enable it are
+         * different :/
+         */
+        gpio_request(EFIKA_WLAN_EN, "wlan_en");
+        gpio_direction_output(EFIKA_WLAN_EN, 0);
+        msleep(10);
+
+        gpio_request(EFIKA_WLAN_RESET, "wlan_rst");
+        gpio_direction_output(EFIKA_WLAN_RESET, 0);
+        msleep(10);
+        gpio_set_value(EFIKA_WLAN_RESET, 1);
+}
+
+static void __init mx51_efikamx_timer_init(void)
+{
+        mx51_clocks_init(32768, 24000000, 22579200, 24576000);
+}
+
+static struct sys_timer mx51_efikamx_timer = {
+        .init = mx51_efikamx_timer_init,
+};
+
+MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
+        /* Maintainer: Amit Kucheria <amit.kucheria@linaro.org> */
+        .atag_offset = 0x100,
+        .map_io = mx51_map_io,
+        .init_early = imx51_init_early,
+        .init_irq = mx51_init_irq,
+        .handle_irq = imx51_handle_irq,
+        .timer = &mx51_efikamx_timer,
+        .init_machine = mx51_efikamx_init,
+        .restart = mx51_efikamx_restart,
+MACHINE_END