Merge branch 'master' into for-next

1 files changed, 357 insertions, 0 deletions

diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
new file mode 100644
index 000000000000..9c77da98a10e
--- /dev/null
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -0,0 +1,357 @@
+/*
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/gpio.h>
+#include <mach/iomux-mx27.h>
+#include <mach/mxc_nand.h>
+#include <mach/imxfb.h>
+#include <mach/mmc.h>
+
+#include "devices-imx27.h"
+#include "devices.h"
+
+/*
+ * Base address of PBC controller, CS4
+ */
+#define PBC_BASE_ADDRESS        0xf4300000
+#define PBC_REG_ADDR(offset)    (void __force __iomem *) \
+                (PBC_BASE_ADDRESS + (offset))
+
+/* When the PBC address connection is fixed in h/w, defined as 1 */
+#define PBC_ADDR_SH             0
+
+/* Offsets for the PBC Controller register */
+/*
+ * PBC Board version register offset
+ */
+#define PBC_VERSION_REG         PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 1 set address.
+ */
+#define PBC_BCTRL1_SET_REG      PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 1 clear address.
+ */
+#define PBC_BCTRL1_CLEAR_REG    PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH)
+
+/* PBC Board Control Register 1 bit definitions */
+#define PBC_BCTRL1_LCDON        0x0800  /* Enable the LCD */
+
+/* to determine the correct external crystal reference */
+#define CKIH_27MHZ_BIT_SET      (1 << 3)
+
+static unsigned int mx27ads_pins[] = {
+        /* UART0 */
+        PE12_PF_UART1_TXD,
+        PE13_PF_UART1_RXD,
+        PE14_PF_UART1_CTS,
+        PE15_PF_UART1_RTS,
+        /* UART1 */
+        PE3_PF_UART2_CTS,
+        PE4_PF_UART2_RTS,
+        PE6_PF_UART2_TXD,
+        PE7_PF_UART2_RXD,
+        /* UART2 */
+        PE8_PF_UART3_TXD,
+        PE9_PF_UART3_RXD,
+        PE10_PF_UART3_CTS,
+        PE11_PF_UART3_RTS,
+        /* UART3 */
+        PB26_AF_UART4_RTS,
+        PB28_AF_UART4_TXD,
+        PB29_AF_UART4_CTS,
+        PB31_AF_UART4_RXD,
+        /* UART4 */
+        PB18_AF_UART5_TXD,
+        PB19_AF_UART5_RXD,
+        PB20_AF_UART5_CTS,
+        PB21_AF_UART5_RTS,
+        /* UART5 */
+        PB10_AF_UART6_TXD,
+        PB12_AF_UART6_CTS,
+        PB11_AF_UART6_RXD,
+        PB13_AF_UART6_RTS,
+        /* FEC */
+        PD0_AIN_FEC_TXD0,
+        PD1_AIN_FEC_TXD1,
+        PD2_AIN_FEC_TXD2,
+        PD3_AIN_FEC_TXD3,
+        PD4_AOUT_FEC_RX_ER,
+        PD5_AOUT_FEC_RXD1,
+        PD6_AOUT_FEC_RXD2,
+        PD7_AOUT_FEC_RXD3,
+        PD8_AF_FEC_MDIO,
+        PD9_AIN_FEC_MDC,
+        PD10_AOUT_FEC_CRS,
+        PD11_AOUT_FEC_TX_CLK,
+        PD12_AOUT_FEC_RXD0,
+        PD13_AOUT_FEC_RX_DV,
+        PD14_AOUT_FEC_RX_CLK,
+        PD15_AOUT_FEC_COL,
+        PD16_AIN_FEC_TX_ER,
+        PF23_AIN_FEC_TX_EN,
+        /* I2C2 */
+        PC5_PF_I2C2_SDA,
+        PC6_PF_I2C2_SCL,
+        /* FB */
+        PA5_PF_LSCLK,
+        PA6_PF_LD0,
+        PA7_PF_LD1,
+        PA8_PF_LD2,
+        PA9_PF_LD3,
+        PA10_PF_LD4,
+        PA11_PF_LD5,
+        PA12_PF_LD6,
+        PA13_PF_LD7,
+        PA14_PF_LD8,
+        PA15_PF_LD9,
+        PA16_PF_LD10,
+        PA17_PF_LD11,
+        PA18_PF_LD12,
+        PA19_PF_LD13,
+        PA20_PF_LD14,
+        PA21_PF_LD15,
+        PA22_PF_LD16,
+        PA23_PF_LD17,
+        PA24_PF_REV,
+        PA25_PF_CLS,
+        PA26_PF_PS,
+        PA27_PF_SPL_SPR,
+        PA28_PF_HSYNC,
+        PA29_PF_VSYNC,
+        PA30_PF_CONTRAST,
+        PA31_PF_OE_ACD,
+        /* OWIRE */
+        PE16_AF_OWIRE,
+        /* SDHC1*/
+        PE18_PF_SD1_D0,
+        PE19_PF_SD1_D1,
+        PE20_PF_SD1_D2,
+        PE21_PF_SD1_D3,
+        PE22_PF_SD1_CMD,
+        PE23_PF_SD1_CLK,
+        /* SDHC2*/
+        PB4_PF_SD2_D0,
+        PB5_PF_SD2_D1,
+        PB6_PF_SD2_D2,
+        PB7_PF_SD2_D3,
+        PB8_PF_SD2_CMD,
+        PB9_PF_SD2_CLK,
+};
+
+static const struct mxc_nand_platform_data
+mx27ads_nand_board_info __initconst = {
+        .width = 1,
+        .hw_ecc = 1,
+};
+
+/* ADS's NOR flash */
+static struct physmap_flash_data mx27ads_flash_data = {
+        .width = 2,
+};
+
+static struct resource mx27ads_flash_resource = {
+        .start = 0xc0000000,
+        .end = 0xc0000000 + 0x02000000 - 1,
+        .flags = IORESOURCE_MEM,
+
+};
+
+static struct platform_device mx27ads_nor_mtd_device = {
+        .name = "physmap-flash",
+        .id = 0,
+        .dev = {
+                .platform_data = &mx27ads_flash_data,
+        },
+        .num_resources = 1,
+        .resource = &mx27ads_flash_resource,
+};
+
+static const struct imxi2c_platform_data mx27ads_i2c1_data __initconst = {
+        .bitrate = 100000,
+};
+
+static struct i2c_board_info mx27ads_i2c_devices[] = {
+};
+
+void lcd_power(int on)
+{
+        if (on)
+                __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
+        else
+                __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
+}
+
+static struct imx_fb_videomode mx27ads_modes[] = {
+        {
+                .mode = {
+                        .name           = "Sharp-LQ035Q7",
+                        .refresh        = 60,
+                        .xres           = 240,
+                        .yres           = 320,
+                        .pixclock       = 188679, /* in ps (5.3MHz) */
+                        .hsync_len      = 1,
+                        .left_margin    = 9,
+                        .right_margin   = 16,
+                        .vsync_len      = 1,
+                        .upper_margin   = 7,
+                        .lower_margin   = 9,
+                },
+                .bpp            = 16,
+                .pcr            = 0xFB008BC0,
+        },
+};
+
+static struct imx_fb_platform_data mx27ads_fb_data = {
+        .mode = mx27ads_modes,
+        .num_modes = ARRAY_SIZE(mx27ads_modes),
+
+        /*
+         * - HSYNC active high
+         * - VSYNC active high
+         * - clk notenabled while idle
+         * - clock inverted
+         * - data not inverted
+         * - data enable low active
+         * - enable sharp mode
+         */
+        .pwmr           = 0x00A903FF,
+        .lscr1          = 0x00120300,
+        .dmacr          = 0x00020010,
+
+        .lcd_power      = lcd_power,
+};
+
+static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+                              void *data)
+{
+        return request_irq(IRQ_GPIOE(21), detect_irq, IRQF_TRIGGER_RISING,
+                           "sdhc1-card-detect", data);
+}
+
+static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+                              void *data)
+{
+        return request_irq(IRQ_GPIOB(7), detect_irq, IRQF_TRIGGER_RISING,
+                           "sdhc2-card-detect", data);
+}
+
+static void mx27ads_sdhc1_exit(struct device *dev, void *data)
+{
+        free_irq(IRQ_GPIOE(21), data);
+}
+
+static void mx27ads_sdhc2_exit(struct device *dev, void *data)
+{
+        free_irq(IRQ_GPIOB(7), data);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+        .init = mx27ads_sdhc1_init,
+        .exit = mx27ads_sdhc1_exit,
+};
+
+static struct imxmmc_platform_data sdhc2_pdata = {
+        .init = mx27ads_sdhc2_init,
+        .exit = mx27ads_sdhc2_exit,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+        &mx27ads_nor_mtd_device,
+        &mxc_fec_device,
+        &mxc_w1_master_device,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+        .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static void __init mx27ads_board_init(void)
+{
+        mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
+                        "mx27ads");
+
+        imx27_add_imx_uart0(&uart_pdata);
+        imx27_add_imx_uart1(&uart_pdata);
+        imx27_add_imx_uart2(&uart_pdata);
+        imx27_add_imx_uart3(&uart_pdata);
+        imx27_add_imx_uart4(&uart_pdata);
+        imx27_add_imx_uart5(&uart_pdata);
+        imx27_add_mxc_nand(&mx27ads_nand_board_info);
+
+        /* only the i2c master 1 is used on this CPU card */
+        i2c_register_board_info(1, mx27ads_i2c_devices,
+                                ARRAY_SIZE(mx27ads_i2c_devices));
+        imx27_add_i2c_imx1(&mx27ads_i2c1_data);
+        mxc_register_device(&mxc_fb_device, &mx27ads_fb_data);
+        mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
+        mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata);
+
+        platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx27ads_timer_init(void)
+{
+        unsigned long fref = 26000000;
+
+        if ((__raw_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0)
+                fref = 27000000;
+
+        mx27_clocks_init(fref);
+}
+
+static struct sys_timer mx27ads_timer = {
+        .init   = mx27ads_timer_init,
+};
+
+static struct map_desc mx27ads_io_desc[] __initdata = {
+        {
+                .virtual = PBC_BASE_ADDRESS,
+                .pfn = __phys_to_pfn(MX27_CS4_BASE_ADDR),
+                .length = SZ_1M,
+                .type = MT_DEVICE,
+        },
+};
+
+static void __init mx27ads_map_io(void)
+{
+        mx27_map_io();
+        iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
+}
+
+MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
+        /* maintainer: Freescale Semiconductor, Inc. */
+        .phys_io        = MX27_AIPI_BASE_ADDR,
+        .io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+        .boot_params    = MX27_PHYS_OFFSET + 0x100,
+        .map_io         = mx27ads_map_io,
+        .init_irq       = mx27_init_irq,
+        .init_machine   = mx27ads_board_init,
+        .timer          = &mx27ads_timer,
+MACHINE_END