ARM: imx: rename mach dir for mx21 and mx27 to mach-imx

Finally all imx code should end up there, start with mach-mx2.  While
touching all files rename some files to use a hyphen instead of an
underscore.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

1 files changed, 235 insertions, 0 deletions

diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
new file mode 100644
index 000000000000..1f616dcaabc9
--- /dev/null
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -0,0 +1,235 @@
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm038.c which is :
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/board-eukrea_cpuimx27.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
+#include <mach/iomux-mx27.h>
+#include <mach/imx-uart.h>
+#include <mach/mxc_nand.h>
+
+#include "devices.h"
+
+static int eukrea_cpuimx27_pins[] = {
+        /* UART1 */
+        PE12_PF_UART1_TXD,
+        PE13_PF_UART1_RXD,
+        PE14_PF_UART1_CTS,
+        PE15_PF_UART1_RTS,
+        /* UART4 */
+        PB26_AF_UART4_RTS,
+        PB28_AF_UART4_TXD,
+        PB29_AF_UART4_CTS,
+        PB31_AF_UART4_RXD,
+        /* FEC */
+        PD0_AIN_FEC_TXD0,
+        PD1_AIN_FEC_TXD1,
+        PD2_AIN_FEC_TXD2,
+        PD3_AIN_FEC_TXD3,
+        PD4_AOUT_FEC_RX_ER,
+        PD5_AOUT_FEC_RXD1,
+        PD6_AOUT_FEC_RXD2,
+        PD7_AOUT_FEC_RXD3,
+        PD8_AF_FEC_MDIO,
+        PD9_AIN_FEC_MDC,
+        PD10_AOUT_FEC_CRS,
+        PD11_AOUT_FEC_TX_CLK,
+        PD12_AOUT_FEC_RXD0,
+        PD13_AOUT_FEC_RX_DV,
+        PD14_AOUT_FEC_RX_CLK,
+        PD15_AOUT_FEC_COL,
+        PD16_AIN_FEC_TX_ER,
+        PF23_AIN_FEC_TX_EN,
+        /* I2C1 */
+        PD17_PF_I2C_DATA,
+        PD18_PF_I2C_CLK,
+        /* SDHC2 */
+        PB4_PF_SD2_D0,
+        PB5_PF_SD2_D1,
+        PB6_PF_SD2_D2,
+        PB7_PF_SD2_D3,
+        PB8_PF_SD2_CMD,
+        PB9_PF_SD2_CLK,
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+        /* Quad UART's IRQ */
+        GPIO_PORTD | 22 | GPIO_GPIO | GPIO_IN,
+        GPIO_PORTD | 23 | GPIO_GPIO | GPIO_IN,
+        GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN,
+        GPIO_PORTD | 30 | GPIO_GPIO | GPIO_IN,
+#endif
+};
+
+static struct physmap_flash_data eukrea_cpuimx27_flash_data = {
+        .width = 2,
+};
+
+static struct resource eukrea_cpuimx27_flash_resource = {
+        .start = 0xc0000000,
+        .end   = 0xc3ffffff,
+        .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device eukrea_cpuimx27_nor_mtd_device = {
+        .name = "physmap-flash",
+        .id = 0,
+        .dev = {
+                .platform_data = &eukrea_cpuimx27_flash_data,
+        },
+        .num_resources = 1,
+        .resource = &eukrea_cpuimx27_flash_resource,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+        {
+                .flags = IMXUART_HAVE_RTSCTS,
+        }, {
+                .flags = IMXUART_HAVE_RTSCTS,
+        },
+};
+
+static struct mxc_nand_platform_data eukrea_cpuimx27_nand_board_info = {
+        .width = 1,
+        .hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+        &eukrea_cpuimx27_nor_mtd_device,
+        &mxc_fec_device,
+};
+
+static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = {
+        .bitrate = 100000,
+};
+
+static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
+        {
+                I2C_BOARD_INFO("pcf8563", 0x51),
+        },
+};
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+static struct plat_serial8250_port serial_platform_data[] = {
+        {
+                .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000),
+                .irq = IRQ_GPIOB(23),
+                .uartclk = 14745600,
+                .regshift = 1,
+                .iotype = UPIO_MEM,
+                .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+        }, {
+                .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000),
+                .irq = IRQ_GPIOB(22),
+                .uartclk = 14745600,
+                .regshift = 1,
+                .iotype = UPIO_MEM,
+                .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+        }, {
+                .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000),
+                .irq = IRQ_GPIOB(27),
+                .uartclk = 14745600,
+                .regshift = 1,
+                .iotype = UPIO_MEM,
+                .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+        }, {
+                .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000),
+                .irq = IRQ_GPIOB(30),
+                .uartclk = 14745600,
+                .regshift = 1,
+                .iotype = UPIO_MEM,
+                .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+        }, {
+        }
+};
+
+static struct platform_device serial_device = {
+        .name = "serial8250",
+        .id = 0,
+        .dev = {
+                .platform_data = serial_platform_data,
+        },
+};
+#endif
+
+static void __init eukrea_cpuimx27_init(void)
+{
+        mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
+                ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
+
+        mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+
+        mxc_register_device(&imx27_nand_device,
+                        &eukrea_cpuimx27_nand_board_info);
+
+        i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
+                                ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
+
+        mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx27_i2c_1_data);
+
+        platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
+        /* SDHC2 can be used for Wifi */
+        mxc_register_device(&mxc_sdhc_device1, NULL);
+        /* in which case UART4 is also used for Bluetooth */
+        mxc_register_device(&mxc_uart_device3, &uart_pdata[1]);
+#endif
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+        platform_device_register(&serial_device);
+#endif
+
+#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
+        eukrea_mbimx27_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx27_timer_init(void)
+{
+        mx27_clocks_init(26000000);
+}
+
+static struct sys_timer eukrea_cpuimx27_timer = {
+        .init = eukrea_cpuimx27_timer_init,
+};
+
+MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
+        .phys_io        = MX27_AIPI_BASE_ADDR,
+        .io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+        .boot_params    = MX27_PHYS_OFFSET + 0x100,
+        .map_io         = mx27_map_io,
+        .init_irq       = mx27_init_irq,
+        .init_machine   = eukrea_cpuimx27_init,
+        .timer          = &eukrea_cpuimx27_timer,
+MACHINE_END