ARM: 5937/1: Add support for EP9315 based Snapper CL15 board

Add support for Bluewater Systems EP9315 based Snapper CL15 single board
computer module.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: Hartley Sweeten <hartleys@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 172 insertions, 0 deletions

diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
new file mode 100644
index 000000000000..51134b0382ca
--- /dev/null
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -0,0 +1,172 @@
+/*
+ * arch/arm/mach-ep93xx/snappercl15.c
+ * Bluewater Systems Snapper CL15 system module
+ *
+ * Copyright (C) 2009 Bluewater Systems Ltd
+ * Author: Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * NAND code adapted from driver by:
+ *   Andre Renaud <andre@bluewatersys.com>
+ *   James R. McKaskill
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/fb.h>
+
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+
+#include <mach/hardware.h>
+#include <mach/fb.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#define SNAPPERCL15_NAND_BASE   (EP93XX_CS7_PHYS_BASE + SZ_16M)
+
+#define SNAPPERCL15_NAND_WPN    (1 << 8)  /* Write protect (active low) */
+#define SNAPPERCL15_NAND_ALE    (1 << 9)  /* Address latch */
+#define SNAPPERCL15_NAND_CLE    (1 << 10) /* Command latch */
+#define SNAPPERCL15_NAND_CEN    (1 << 11) /* Chip enable (active low) */
+#define SNAPPERCL15_NAND_RDY    (1 << 14) /* Device ready */
+
+#define NAND_CTRL_ADDR(chip)    (chip->IO_ADDR_W + 0x40)
+
+static void snappercl15_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+                                      unsigned int ctrl)
+{
+        struct nand_chip *chip = mtd->priv;
+        static u16 nand_state = SNAPPERCL15_NAND_WPN;
+        u16 set;
+
+        if (ctrl & NAND_CTRL_CHANGE) {
+                set = SNAPPERCL15_NAND_CEN | SNAPPERCL15_NAND_WPN;
+
+                if (ctrl & NAND_NCE)
+                        set &= ~SNAPPERCL15_NAND_CEN;
+                if (ctrl & NAND_CLE)
+                        set |= SNAPPERCL15_NAND_CLE;
+                if (ctrl & NAND_ALE)
+                        set |= SNAPPERCL15_NAND_ALE;
+
+                nand_state &= ~(SNAPPERCL15_NAND_CEN |
+                                SNAPPERCL15_NAND_CLE |
+                                SNAPPERCL15_NAND_ALE);
+                nand_state |= set;
+                __raw_writew(nand_state, NAND_CTRL_ADDR(chip));
+        }
+
+        if (cmd != NAND_CMD_NONE)
+                __raw_writew((cmd & 0xff) | nand_state, chip->IO_ADDR_W);
+}
+
+static int snappercl15_nand_dev_ready(struct mtd_info *mtd)
+{
+        struct nand_chip *chip = mtd->priv;
+
+        return !!(__raw_readw(NAND_CTRL_ADDR(chip)) & SNAPPERCL15_NAND_RDY);
+}
+
+static const char *snappercl15_nand_part_probes[] = {"cmdlinepart", NULL};
+
+static struct mtd_partition snappercl15_nand_parts[] = {
+        {
+                .name           = "Kernel",
+                .offset         = 0,
+                .size           = SZ_2M,
+        },
+        {
+                .name           = "Filesystem",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = MTDPART_SIZ_FULL,
+        },
+};
+
+static struct platform_nand_data snappercl15_nand_data = {
+        .chip = {
+                .nr_chips               = 1,
+                .part_probe_types       = snappercl15_nand_part_probes,
+                .partitions             = snappercl15_nand_parts,
+                .nr_partitions          = ARRAY_SIZE(snappercl15_nand_parts),
+                .options                = NAND_NO_AUTOINCR,
+                .chip_delay             = 25,
+        },
+        .ctrl = {
+                .dev_ready              = snappercl15_nand_dev_ready,
+                .cmd_ctrl               = snappercl15_nand_cmd_ctrl,
+        },
+};
+
+static struct resource snappercl15_nand_resource[] = {
+        {
+                .start          = SNAPPERCL15_NAND_BASE,
+                .end            = SNAPPERCL15_NAND_BASE + SZ_4K - 1,
+                .flags          = IORESOURCE_MEM,
+        },
+};
+
+static struct platform_device snappercl15_nand_device = {
+        .name                   = "gen_nand",
+        .id                     = -1,
+        .dev.platform_data      = &snappercl15_nand_data,
+        .resource               = snappercl15_nand_resource,
+        .num_resources          = ARRAY_SIZE(snappercl15_nand_resource),
+};
+
+static struct ep93xx_eth_data snappercl15_eth_data = {
+        .phy_id                 = 1,
+};
+
+static struct i2c_gpio_platform_data snappercl15_i2c_gpio_data = {
+        .sda_pin                = EP93XX_GPIO_LINE_EEDAT,
+        .sda_is_open_drain      = 0,
+        .scl_pin                = EP93XX_GPIO_LINE_EECLK,
+        .scl_is_open_drain      = 0,
+        .udelay                 = 0,
+        .timeout                = 0,
+};
+
+static struct i2c_board_info __initdata snappercl15_i2c_data[] = {
+        {
+                /* Audio codec */
+                I2C_BOARD_INFO("tlv320aic23", 0x1a),
+        },
+};
+
+static struct ep93xxfb_mach_info snappercl15_fb_info = {
+        .num_modes              = EP93XXFB_USE_MODEDB,
+        .bpp                    = 16,
+};
+
+static void __init snappercl15_init_machine(void)
+{
+        ep93xx_init_devices();
+        ep93xx_register_eth(&snappercl15_eth_data, 1);
+        ep93xx_register_i2c(&snappercl15_i2c_gpio_data, snappercl15_i2c_data,
+                            ARRAY_SIZE(snappercl15_i2c_data));
+        ep93xx_register_fb(&snappercl15_fb_info);
+        platform_device_register(&snappercl15_nand_device);
+}
+
+MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
+        /* Maintainer: Ryan Mallon <ryan@bluewatersys.com> */
+        .phys_io        = EP93XX_APB_PHYS_BASE,
+        .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+        .boot_params    = EP93XX_SDCE0_PHYS_BASE + 0x100,
+        .map_io         = ep93xx_map_io,
+        .init_irq       = ep93xx_init_irq,
+        .timer          = &ep93xx_timer,
+        .init_machine   = snappercl15_init_machine,
+MACHINE_END