davinci: da8xx: Add base DA830/OMAP-L137 SoC support

The da830/omap l137 is a new SoC from TI that is similar
to the davinci line.  Since its so similar to davinci,
put the support for the da830 in the same directory as
the davinci code.

There are differences, however.  Some of those differences
prevent support for davinci and da830 platforms to work
in the same kernel binary.  Those differences are:

1) Different physical address for RAM.  This is relevant
   to Makefile.boot addresses and PHYS_OFFSET.  The
   Makefile.boot issue isn't truly a kernel issue but
   it means u-boot won't work with a uImage including
   both architectures.  The PHYS_OFFSET issue is
   addressed by the "Allow for runtime-determined
   PHYS_OFFSET" patch by Lennert Buytenhek but it
   hasn't been accepted yet.

2) Different uart addresses.  This is only an issue
   for the 'addruart' assembly macro when CONFIG_DEBUG_LL
   is enabled.  Since the code in that macro is called
   so early (e.g., by _error_p in kernel/head.S when
   the processor lookup fails), we can't determine what
   platform the kernel is running on at runtime to use
   the correct uart address.

These areas have compile errors intentionally inserted
to indicate to the builder they're doing something wrong.

A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added
to distinguish between a true davinci architecture and
the da830 architecture.

Note that the da830 currently has an issue with writeback
data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be
enabled when building a da830 kernel.

Additional generalizations for future SoCs in the da8xx family done by
Sudhakar Rajashekhara and Sekhar Nori.

Signed-off-by: Steve Chen <schen@mvista.com>
Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com>
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Cc: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

1 files changed, 287 insertions, 0 deletions

diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
new file mode 100644
index 000000000000..c367055ae9b9
--- /dev/null
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -0,0 +1,287 @@
+/*
+ * DA8XX/OMAP L1XX platform device data
+ *
+ * Copyright (c) 2007-2009, MontaVista Software, Inc. <source@mvista.com>
+ * Derived from code that was:
+ *      Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/serial_8250.h>
+
+#include <mach/cputype.h>
+#include <mach/common.h>
+#include <mach/time.h>
+#include <mach/da8xx.h>
+
+#include "clock.h"
+
+#define DA8XX_TPCC_BASE                 0x01c00000
+#define DA8XX_TPTC0_BASE                0x01c08000
+#define DA8XX_TPTC1_BASE                0x01c08400
+#define DA8XX_WDOG_BASE                 0x01c21000 /* DA8XX_TIMER64P1_BASE */
+#define DA8XX_I2C0_BASE                 0x01c22000
+#define DA8XX_EMAC_CPPI_PORT_BASE       0x01e20000
+#define DA8XX_EMAC_CPGMACSS_BASE        0x01e22000
+#define DA8XX_EMAC_CPGMAC_BASE          0x01e23000
+#define DA8XX_EMAC_MDIO_BASE            0x01e24000
+#define DA8XX_GPIO_BASE                 0x01e26000
+#define DA8XX_I2C1_BASE                 0x01e28000
+
+#define DA8XX_EMAC_CTRL_REG_OFFSET      0x3000
+#define DA8XX_EMAC_MOD_REG_OFFSET       0x2000
+#define DA8XX_EMAC_RAM_OFFSET           0x0000
+#define DA8XX_MDIO_REG_OFFSET           0x4000
+#define DA8XX_EMAC_CTRL_RAM_SIZE        SZ_8K
+
+static struct plat_serial8250_port da8xx_serial_pdata[] = {
+        {
+                .mapbase        = DA8XX_UART0_BASE,
+                .irq            = IRQ_DA8XX_UARTINT0,
+                .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+                                        UPF_IOREMAP,
+                .iotype         = UPIO_MEM,
+                .regshift       = 2,
+        },
+        {
+                .mapbase        = DA8XX_UART1_BASE,
+                .irq            = IRQ_DA8XX_UARTINT1,
+                .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+                                        UPF_IOREMAP,
+                .iotype         = UPIO_MEM,
+                .regshift       = 2,
+        },
+        {
+                .mapbase        = DA8XX_UART2_BASE,
+                .irq            = IRQ_DA8XX_UARTINT2,
+                .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+                                        UPF_IOREMAP,
+                .iotype         = UPIO_MEM,
+                .regshift       = 2,
+        },
+        {
+                .flags  = 0,
+        },
+};
+
+struct platform_device da8xx_serial_device = {
+        .name   = "serial8250",
+        .id     = PLAT8250_DEV_PLATFORM,
+        .dev    = {
+                .platform_data  = da8xx_serial_pdata,
+        },
+};
+
+static const s8 da8xx_dma_chan_no_event[] = {
+        20, 21,
+        -1
+};
+
+static const s8 da8xx_queue_tc_mapping[][2] = {
+        /* {event queue no, TC no} */
+        {0, 0},
+        {1, 1},
+        {-1, -1}
+};
+
+static const s8 da8xx_queue_priority_mapping[][2] = {
+        /* {event queue no, Priority} */
+        {0, 3},
+        {1, 7},
+        {-1, -1}
+};
+
+static struct edma_soc_info da8xx_edma_info[] = {
+        {
+                .n_channel              = 32,
+                .n_region               = 4,
+                .n_slot                 = 128,
+                .n_tc                   = 2,
+                .n_cc                   = 1,
+                .noevent                = da8xx_dma_chan_no_event,
+                .queue_tc_mapping       = da8xx_queue_tc_mapping,
+                .queue_priority_mapping = da8xx_queue_priority_mapping,
+        },
+};
+
+static struct resource da8xx_edma_resources[] = {
+        {
+                .name   = "edma_cc0",
+                .start  = DA8XX_TPCC_BASE,
+                .end    = DA8XX_TPCC_BASE + SZ_32K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        {
+                .name   = "edma_tc0",
+                .start  = DA8XX_TPTC0_BASE,
+                .end    = DA8XX_TPTC0_BASE + SZ_1K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        {
+                .name   = "edma_tc1",
+                .start  = DA8XX_TPTC1_BASE,
+                .end    = DA8XX_TPTC1_BASE + SZ_1K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        {
+                .name   = "edma0",
+                .start  = IRQ_DA8XX_TCERRINT0,
+                .flags  = IORESOURCE_IRQ,
+        },
+        {
+                .name   = "edma0_err",
+                .start  = IRQ_DA8XX_CCERRINT,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device da8xx_edma_device = {
+        .name           = "edma",
+        .id             = -1,
+        .dev = {
+                .platform_data  = da8xx_edma_info,
+        },
+        .num_resources  = ARRAY_SIZE(da8xx_edma_resources),
+        .resource       = da8xx_edma_resources,
+};
+
+int __init da8xx_register_edma(void)
+{
+        return platform_device_register(&da8xx_edma_device);
+}
+
+static struct resource da8xx_i2c_resources0[] = {
+        {
+                .start  = DA8XX_I2C0_BASE,
+                .end    = DA8XX_I2C0_BASE + SZ_4K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        {
+                .start  = IRQ_DA8XX_I2CINT0,
+                .end    = IRQ_DA8XX_I2CINT0,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device da8xx_i2c_device0 = {
+        .name           = "i2c_davinci",
+        .id             = 1,
+        .num_resources  = ARRAY_SIZE(da8xx_i2c_resources0),
+        .resource       = da8xx_i2c_resources0,
+};
+
+static struct resource da8xx_i2c_resources1[] = {
+        {
+                .start  = DA8XX_I2C1_BASE,
+                .end    = DA8XX_I2C1_BASE + SZ_4K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        {
+                .start  = IRQ_DA8XX_I2CINT1,
+                .end    = IRQ_DA8XX_I2CINT1,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device da8xx_i2c_device1 = {
+        .name           = "i2c_davinci",
+        .id             = 2,
+        .num_resources  = ARRAY_SIZE(da8xx_i2c_resources1),
+        .resource       = da8xx_i2c_resources1,
+};
+
+int __init da8xx_register_i2c(int instance,
+                struct davinci_i2c_platform_data *pdata)
+{
+        struct platform_device *pdev;
+
+        if (instance == 0)
+                pdev = &da8xx_i2c_device0;
+        else if (instance == 1)
+                pdev = &da8xx_i2c_device1;
+        else
+                return -EINVAL;
+
+        pdev->dev.platform_data = pdata;
+        return platform_device_register(pdev);
+}
+
+static struct resource da8xx_watchdog_resources[] = {
+        {
+                .start  = DA8XX_WDOG_BASE,
+                .end    = DA8XX_WDOG_BASE + SZ_4K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+struct platform_device davinci_wdt_device = {
+        .name           = "watchdog",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(da8xx_watchdog_resources),
+        .resource       = da8xx_watchdog_resources,
+};
+
+int __init da8xx_register_watchdog(void)
+{
+        return platform_device_register(&davinci_wdt_device);
+}
+
+static struct resource da8xx_emac_resources[] = {
+        {
+                .start  = DA8XX_EMAC_CPPI_PORT_BASE,
+                .end    = DA8XX_EMAC_CPPI_PORT_BASE + 0x5000 - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        {
+                .start  = IRQ_DA8XX_C0_RX_THRESH_PULSE,
+                .end    = IRQ_DA8XX_C0_RX_THRESH_PULSE,
+                .flags  = IORESOURCE_IRQ,
+        },
+        {
+                .start  = IRQ_DA8XX_C0_RX_PULSE,
+                .end    = IRQ_DA8XX_C0_RX_PULSE,
+                .flags  = IORESOURCE_IRQ,
+        },
+        {
+                .start  = IRQ_DA8XX_C0_TX_PULSE,
+                .end    = IRQ_DA8XX_C0_TX_PULSE,
+                .flags  = IORESOURCE_IRQ,
+        },
+        {
+                .start  = IRQ_DA8XX_C0_MISC_PULSE,
+                .end    = IRQ_DA8XX_C0_MISC_PULSE,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+struct emac_platform_data da8xx_emac_pdata = {
+        .ctrl_reg_offset        = DA8XX_EMAC_CTRL_REG_OFFSET,
+        .ctrl_mod_reg_offset    = DA8XX_EMAC_MOD_REG_OFFSET,
+        .ctrl_ram_offset        = DA8XX_EMAC_RAM_OFFSET,
+        .mdio_reg_offset        = DA8XX_MDIO_REG_OFFSET,
+        .ctrl_ram_size          = DA8XX_EMAC_CTRL_RAM_SIZE,
+        .version                = EMAC_VERSION_2,
+};
+
+static struct platform_device da8xx_emac_device = {
+        .name           = "davinci_emac",
+        .id             = 1,
+        .dev = {
+                .platform_data  = &da8xx_emac_pdata,
+        },
+        .num_resources  = ARRAY_SIZE(da8xx_emac_resources),
+        .resource       = da8xx_emac_resources,
+};
+
+int __init da8xx_register_emac(void)
+{
+        return platform_device_register(&da8xx_emac_device);
+}