davinci: da8xx: Add support for DA830/OMAP-L137 EVM board

Add support for the DA830/OMAP-L137 Evaluation Module (EVM)
from TI.  The EVM has User Interface (UI) and Audio cards
that can be connected which contain various devices.
Support for those devices and ones on the EVM will be
added in subsequent patches.

Additional generalizations for future SoCs in da8xx family done by
Sudhakar Rajashekhara and Sekhar Nori.

Signed-off-by: Steve Chen <schen@mvista.com>
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Cc: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

1 files changed, 127 insertions, 0 deletions

diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
new file mode 100644
index 000000000000..0409eb67cfe1
--- /dev/null
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -0,0 +1,127 @@
+/*
+ * TI DA830/OMAP L137 EVM board
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ * Derived from: arch/arm/mach-davinci/board-dm644x-evm.c
+ *
+ * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/cp_intc.h>
+#include <mach/da8xx.h>
+
+#define DA830_EVM_PHY_MASK              0x0
+#define DA830_EVM_MDIO_FREQUENCY        2200000 /* PHY bus frequency */
+
+static struct at24_platform_data da830_evm_i2c_eeprom_info = {
+        .byte_len       = SZ_256K / 8,
+        .page_size      = 64,
+        .flags          = AT24_FLAG_ADDR16,
+        .setup          = davinci_get_mac_addr,
+        .context        = (void *)0x7f00,
+};
+
+static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
+        {
+                I2C_BOARD_INFO("24c256", 0x50),
+                .platform_data  = &da830_evm_i2c_eeprom_info,
+        },
+};
+
+static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = {
+        .bus_freq       = 100,  /* kHz */
+        .bus_delay      = 0,    /* usec */
+};
+
+static struct davinci_uart_config da830_evm_uart_config __initdata = {
+        .enabled_uarts = 0x7,
+};
+
+static __init void da830_evm_init(void)
+{
+        struct davinci_soc_info *soc_info = &davinci_soc_info;
+        int ret;
+
+        ret = da8xx_register_edma();
+        if (ret)
+                pr_warning("da830_evm_init: edma registration failed: %d\n",
+                                ret);
+
+        ret = da830_pinmux_setup(da830_i2c0_pins);
+        if (ret)
+                pr_warning("da830_evm_init: i2c0 mux setup failed: %d\n",
+                                ret);
+
+        ret = da8xx_register_i2c(0, &da830_evm_i2c_0_pdata);
+        if (ret)
+                pr_warning("da830_evm_init: i2c0 registration failed: %d\n",
+                                ret);
+
+        soc_info->emac_pdata->phy_mask = DA830_EVM_PHY_MASK;
+        soc_info->emac_pdata->mdio_max_freq = DA830_EVM_MDIO_FREQUENCY;
+        soc_info->emac_pdata->rmii_en = 1;
+
+        ret = da830_pinmux_setup(da830_cpgmac_pins);
+        if (ret)
+                pr_warning("da830_evm_init: cpgmac mux setup failed: %d\n",
+                                ret);
+
+        ret = da8xx_register_emac();
+        if (ret)
+                pr_warning("da830_evm_init: emac registration failed: %d\n",
+                                ret);
+
+        ret = da8xx_register_watchdog();
+        if (ret)
+                pr_warning("da830_evm_init: watchdog registration failed: %d\n",
+                                ret);
+
+        davinci_serial_init(&da830_evm_uart_config);
+        i2c_register_board_info(1, da830_evm_i2c_devices,
+                        ARRAY_SIZE(da830_evm_i2c_devices));
+}
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+static int __init da830_evm_console_init(void)
+{
+        return add_preferred_console("ttyS", 2, "115200");
+}
+console_initcall(da830_evm_console_init);
+#endif
+
+static __init void da830_evm_irq_init(void)
+{
+        struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+        cp_intc_init((void __iomem *)DA8XX_CP_INTC_VIRT, DA830_N_CP_INTC_IRQ,
+                        soc_info->intc_irq_prios);
+}
+
+static void __init da830_evm_map_io(void)
+{
+        da830_init();
+}
+
+MACHINE_START(DAVINCI_DA8XX_EVM, "DaVinci DA830/OMAP L137 EVM")
+        .phys_io        = IO_PHYS,
+        .io_pg_offst    = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+        .boot_params    = (DA8XX_DDR_BASE + 0x100),
+        .map_io         = da830_evm_map_io,
+        .init_irq       = da830_evm_irq_init,
+        .timer          = &davinci_timer,
+        .init_machine   = da830_evm_init,
+MACHINE_END