[ARM] 3240/2: AT91RM9200 support for 2.6 (Core)

Patch from SAN People

Following changes were made to clock.c:

1) Replaced <asm/hardware/clock.h> with <linux/clk.h>
2) Removed old unused clk_enable & clk_disable.
3) Replaced clk_use/clk_unuse with clk_enable/clk_disable.

Otherwise it's the same as the previous patch.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 170 insertions, 0 deletions

diff --git a/arch/arm/mach-at91rm9200/irq.c b/arch/arm/mach-at91rm9200/irq.c
new file mode 100644
index 000000000000..cb62bc83a1dd
--- /dev/null
+++ b/arch/arm/mach-at91rm9200/irq.c
@@ -0,0 +1,170 @@
+/*
+ * linux/arch/arm/mach-at91rm9200/irq.c
+ *
+ *  Copyright (C) 2004 SAN People
+ *  Copyright (C) 2004 ATMEL
+ *  Copyright (C) Rick Bronson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/types.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/setup.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+
+#include "generic.h"
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
+        7,      /* Advanced Interrupt Controller */
+        7,      /* System Peripheral */
+        0,      /* Parallel IO Controller A */
+        0,      /* Parallel IO Controller B */
+        0,      /* Parallel IO Controller C */
+        0,      /* Parallel IO Controller D */
+        6,      /* USART 0 */
+        6,      /* USART 1 */
+        6,      /* USART 2 */
+        6,      /* USART 3 */
+        0,      /* Multimedia Card Interface */
+        4,      /* USB Device Port */
+        0,      /* Two-Wire Interface */
+        6,      /* Serial Peripheral Interface */
+        5,      /* Serial Synchronous Controller */
+        5,      /* Serial Synchronous Controller */
+        5,      /* Serial Synchronous Controller */
+        0,      /* Timer Counter 0 */
+        0,      /* Timer Counter 1 */
+        0,      /* Timer Counter 2 */
+        0,      /* Timer Counter 3 */
+        0,      /* Timer Counter 4 */
+        0,      /* Timer Counter 5 */
+        3,      /* USB Host port */
+        3,      /* Ethernet MAC */
+        0,      /* Advanced Interrupt Controller */
+        0,      /* Advanced Interrupt Controller */
+        0,      /* Advanced Interrupt Controller */
+        0,      /* Advanced Interrupt Controller */
+        0,      /* Advanced Interrupt Controller */
+        0,      /* Advanced Interrupt Controller */
+        0       /* Advanced Interrupt Controller */
+};
+
+
+static void at91rm9200_mask_irq(unsigned int irq)
+{
+        /* Disable interrupt on AIC */
+        at91_sys_write(AT91_AIC_IDCR, 1 << irq);
+}
+
+static void at91rm9200_unmask_irq(unsigned int irq)
+{
+        /* Enable interrupt on AIC */
+        at91_sys_write(AT91_AIC_IECR, 1 << irq);
+}
+
+static int at91rm9200_irq_type(unsigned irq, unsigned type)
+{
+        unsigned int smr, srctype;
+
+        /* change triggering only for FIQ and external IRQ0..IRQ6 */
+        if ((irq < AT91_ID_IRQ0) && (irq != AT91_ID_FIQ))
+                return -EINVAL;
+
+        switch (type) {
+        case IRQT_HIGH:
+                srctype = AT91_AIC_SRCTYPE_HIGH;
+                break;
+        case IRQT_RISING:
+                srctype = AT91_AIC_SRCTYPE_RISING;
+                break;
+        case IRQT_LOW:
+                srctype = AT91_AIC_SRCTYPE_LOW;
+                break;
+        case IRQT_FALLING:
+                srctype = AT91_AIC_SRCTYPE_FALLING;
+                break;
+        default:
+                return -EINVAL;
+        }
+
+        smr = at91_sys_read(AT91_AIC_SMR(irq)) & ~AT91_AIC_SRCTYPE;
+        at91_sys_write(AT91_AIC_SMR(irq), smr | srctype);
+        return 0;
+}
+
+static struct irqchip at91rm9200_irq_chip = {
+        .ack            = at91rm9200_mask_irq,
+        .mask           = at91rm9200_mask_irq,
+        .unmask         = at91rm9200_unmask_irq,
+        .set_type       = at91rm9200_irq_type,
+};
+
+/*
+ * Initialize the AIC interrupt controller.
+ */
+void __init at91rm9200_init_irq(unsigned int priority[NR_AIC_IRQS])
+{
+        unsigned int i;
+
+        /* No priority list specified for this board -> use defaults */
+        if (priority == NULL)
+                priority = at91rm9200_default_irq_priority;
+
+        /*
+         * The IVR is used by macro get_irqnr_and_base to read and verify.
+         * The irq number is NR_AIC_IRQS when a spurious interrupt has occurred.
+         */
+        for (i = 0; i < NR_AIC_IRQS; i++) {
+                /* Put irq number in Source Vector Register: */
+                at91_sys_write(AT91_AIC_SVR(i), i);
+                /* Store the Source Mode Register as defined in table above */
+                at91_sys_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]);
+
+                set_irq_chip(i, &at91rm9200_irq_chip);
+                set_irq_handler(i, do_level_IRQ);
+                set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+
+                /* Perform 8 End Of Interrupt Command to make sure AIC will not Lock out nIRQ */
+                if (i < 8)
+                        at91_sys_write(AT91_AIC_EOICR, 0);
+        }
+
+        /*
+         * Spurious Interrupt ID in Spurious Vector Register is NR_AIC_IRQS
+         * When there is no current interrupt, the IRQ Vector Register reads the value stored in AIC_SPU
+         */
+        at91_sys_write(AT91_AIC_SPU, NR_AIC_IRQS);
+
+        /* No debugging in AIC: Debug (Protect) Control Register */
+        at91_sys_write(AT91_AIC_DCR, 0);
+
+        /* Disable and clear all interrupts initially */
+        at91_sys_write(AT91_AIC_IDCR, 0xFFFFFFFF);
+        at91_sys_write(AT91_AIC_ICCR, 0xFFFFFFFF);
+}