[ARM] 4124/1: Rename mach-at91rm9200 and arch-at91rm9200 directories

Now that Linux includes support for the Atmel AT91SAM9260 and
AT91SAM9261 processors in addition to the original Atmel AT91RM9200
(with support for more AT91 processors pending), the "mach-at91rm9200"
and "arch-at91rm9200" directories should be renamed to indicate their
more generic nature.

The following git commands should be run BEFORE applying this patch:
  git-mv arch/arm/mach-at91rm9200 arch/arm/mach-at91
  git-mv include/asm-arm/arch-at91rm9200 include/asm-arm/arch-at91

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 0 insertions, 143 deletions

diff --git a/arch/arm/mach-at91rm9200/board-kb9202.c b/arch/arm/mach-at91rm9200/board-kb9202.c
deleted file mode 100644
index 759d8191854f..000000000000
--- a/arch/arm/mach-at91rm9200/board-kb9202.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * linux/arch/arm/mach-at91rm9200/board-kb9202.c
- *
- *  Copyright (c) 2005 kb_admin
- *                     KwikByte, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <asm/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-
-#include "generic.h"
-
-
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata kb9202_uart_config = {
-        .console_tty    = 0,                                    /* ttyS0 */
-        .nr_tty         = 3,
-        .tty_map        = { 4, 0, 1, -1, -1 }                   /* ttyS0, ..., ttyS4 */
-};
-
-static void __init kb9202_map_io(void)
-{
-        /* Initialize processor: 10 MHz crystal */
-        at91rm9200_initialize(10000000, AT91RM9200_PQFP);
-
-        /* Set up the LEDs */
-        at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
-
-        /* Setup the serial ports and console */
-        at91_init_serial(&kb9202_uart_config);
-}
-
-static void __init kb9202_init_irq(void)
-{
-        at91rm9200_init_interrupts(NULL);
-}
-
-static struct at91_eth_data __initdata kb9202_eth_data = {
-        .phy_irq_pin    = AT91_PIN_PB29,
-        .is_rmii        = 0,
-};
-
-static struct at91_usbh_data __initdata kb9202_usbh_data = {
-        .ports          = 1,
-};
-
-static struct at91_udc_data __initdata kb9202_udc_data = {
-        .vbus_pin       = AT91_PIN_PB24,
-        .pullup_pin     = AT91_PIN_PB22,
-};
-
-static struct at91_mmc_data __initdata kb9202_mmc_data = {
-        .det_pin        = AT91_PIN_PB2,
-        .slot_b         = 0,
-        .wire4          = 1,
-};
-
-static struct mtd_partition __initdata kb9202_nand_partition[] = {
-        {
-                .name   = "nand_fs",
-                .offset = 0,
-                .size   = MTDPART_SIZ_FULL,
-        },
-};
-
-static struct mtd_partition *nand_partitions(int size, int *num_partitions)
-{
-        *num_partitions = ARRAY_SIZE(kb9202_nand_partition);
-        return kb9202_nand_partition;
-}
-
-static struct at91_nand_data __initdata kb9202_nand_data = {
-        .ale            = 22,
-        .cle            = 21,
-        // .det_pin     = ... not there
-        .rdy_pin        = AT91_PIN_PC29,
-        .enable_pin     = AT91_PIN_PC28,
-        .partition_info = nand_partitions,
-};
-
-static void __init kb9202_board_init(void)
-{
-        /* Serial */
-        at91_add_device_serial();
-        /* Ethernet */
-        at91_add_device_eth(&kb9202_eth_data);
-        /* USB Host */
-        at91_add_device_usbh(&kb9202_usbh_data);
-        /* USB Device */
-        at91_add_device_udc(&kb9202_udc_data);
-        /* MMC */
-        at91_add_device_mmc(&kb9202_mmc_data);
-        /* I2C */
-        at91_add_device_i2c();
-        /* SPI */
-        at91_add_device_spi(NULL, 0);
-        /* NAND */
-        at91_add_device_nand(&kb9202_nand_data);
-}
-
-MACHINE_START(KB9200, "KB920x")
-        /* Maintainer: KwikByte, Inc. */
-        .phys_io        = AT91_BASE_SYS,
-        .io_pg_offst    = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-        .boot_params    = AT91_SDRAM_BASE + 0x100,
-        .timer          = &at91rm9200_timer,
-        .map_io         = kb9202_map_io,
-        .init_irq       = kb9202_init_irq,
-        .init_machine   = kb9202_board_init,
-MACHINE_END