arm: at91 move board.h to arch/arm/mach-at91

as this is only used board old style board

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>

1 files changed, 141 insertions, 0 deletions

diff --git a/arch/arm/mach-at91/board.h b/arch/arm/mach-at91/board.h
new file mode 100644
index 000000000000..662451d85fc9
--- /dev/null
+++ b/arch/arm/mach-at91/board.h
@@ -0,0 +1,141 @@
+/*
+ * arch/arm/mach-at91/include/mach/board.h
+ *
+ *  Copyright (C) 2005 HP Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * These are data structures found in platform_device.dev.platform_data,
+ * and describing board-specific data needed by drivers.  For example,
+ * which pin is used for a given GPIO role.
+ *
+ * In 2.6, drivers should strongly avoid board-specific knowledge so
+ * that supporting new boards normally won't require driver patches.
+ * Most board-specific knowledge should be in arch/.../board-*.c files.
+ */
+
+#ifndef __ASM_ARCH_BOARD_H
+#define __ASM_ARCH_BOARD_H
+
+#include <linux/platform_data/atmel.h>
+
+ /* USB Device */
+extern void __init at91_add_device_udc(struct at91_udc_data *data);
+
+ /* USB High Speed Device */
+extern void __init at91_add_device_usba(struct usba_platform_data *data);
+
+ /* Compact Flash */
+extern void __init at91_add_device_cf(struct at91_cf_data *data);
+
+ /* MMC / SD */
+  /* at91_mci platform config */
+struct at91_mmc_data {
+        int             det_pin;        /* card detect IRQ */
+        unsigned        slot_b:1;       /* uses Slot B */
+        unsigned        wire4:1;        /* (SD) supports DAT0..DAT3 */
+        int             wp_pin;         /* (SD) writeprotect detect */
+        int             vcc_pin;        /* power switching (high == on) */
+};
+extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
+
+  /* atmel-mci platform config */
+extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data);
+
+extern void __init at91_add_device_eth(struct macb_platform_data *data);
+
+ /* USB Host */
+extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
+extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
+extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
+
+extern void __init at91_add_device_nand(struct atmel_nand_data *data);
+
+ /* I2C*/
+#if defined(CONFIG_ARCH_AT91SAM9G45)
+extern void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices);
+#else
+extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);
+#endif
+
+ /* SPI */
+extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
+
+ /* Serial */
+#define ATMEL_UART_CTS  0x01
+#define ATMEL_UART_RTS  0x02
+#define ATMEL_UART_DSR  0x04
+#define ATMEL_UART_DTR  0x08
+#define ATMEL_UART_DCD  0x10
+#define ATMEL_UART_RI   0x20
+
+extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
+
+extern struct platform_device *atmel_default_console_device;
+
+extern void __init at91_add_device_serial(void);
+
+/*
+ * PWM
+ */
+#define AT91_PWM0       0
+#define AT91_PWM1       1
+#define AT91_PWM2       2
+#define AT91_PWM3       3
+
+extern void __init at91_add_device_pwm(u32 mask);
+
+/*
+ * SSC -- accessed through ssc_request(id).  Drivers don't bind to SSC
+ * platform devices.  Their SSC ID is part of their configuration data,
+ * along with information about which SSC signals they should use.
+ */
+#define ATMEL_SSC_TK    0x01
+#define ATMEL_SSC_TF    0x02
+#define ATMEL_SSC_TD    0x04
+#define ATMEL_SSC_TX    (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
+
+#define ATMEL_SSC_RK    0x10
+#define ATMEL_SSC_RF    0x20
+#define ATMEL_SSC_RD    0x40
+#define ATMEL_SSC_RX    (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
+
+extern void __init at91_add_device_ssc(unsigned id, unsigned pins);
+
+ /* LCD Controller */
+struct atmel_lcdfb_info;
+extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
+
+ /* AC97 */
+extern void __init at91_add_device_ac97(struct ac97c_platform_data *data);
+
+ /* ISI */
+struct isi_platform_data;
+extern void __init at91_add_device_isi(struct isi_platform_data *data,
+                bool use_pck_as_mck);
+
+ /* Touchscreen Controller */
+extern void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data);
+
+/* CAN */
+extern void __init at91_add_device_can(struct at91_can_data *data);
+
+ /* LEDs */
+extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
+extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
+
+#endif