at91: Refactor Stamp9G20 and PControl G20 board file

As PControl G20 is a carrier board for the Stamp9G20 SoM, some code can
be shared. Therefore board-stamp9g20.c is refactored to allow reusing the
SoM initialization and board-pcontrol-g20.c is modified to use it.

Signed-off-by: Christian Glindkamp <christian.glindkamp@taskit.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

1 files changed, 43 insertions, 39 deletions

diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 5206eef4a67e..f8902b118960 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -32,7 +32,7 @@
 #include "generic.h"
 
 
-static void __init portuxg20_map_io(void)
+void __init stamp9g20_map_io(void)
 {
         /* Initialize processor: 18.432 MHz crystal */
         at91sam9260_initialize(18432000);
@@ -40,6 +40,24 @@ static void __init portuxg20_map_io(void)
         /* DGBU on ttyS0. (Rx & Tx only) */
         at91_register_uart(0, 0, 0);
 
+        /* set serial console to ttyS0 (ie, DBGU) */
+        at91_set_serial_console(0);
+}
+
+static void __init stamp9g20evb_map_io(void)
+{
+        stamp9g20_map_io();
+
+        /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+        at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+                                                | ATMEL_UART_DTR | ATMEL_UART_DSR
+                                                | ATMEL_UART_DCD | ATMEL_UART_RI);
+}
+
+static void __init portuxg20_map_io(void)
+{
+        stamp9g20_map_io();
+
         /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
         at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
                                                 | ATMEL_UART_DTR | ATMEL_UART_DSR
@@ -56,26 +74,6 @@ static void __init portuxg20_map_io(void)
 
         /* USART5 on ttyS6. (Rx, Tx only) */
         at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
-
-        /* set serial console to ttyS0 (ie, DBGU) */
-        at91_set_serial_console(0);
-}
-
-static void __init stamp9g20_map_io(void)
-{
-        /* Initialize processor: 18.432 MHz crystal */
-        at91sam9260_initialize(18432000);
-
-        /* DGBU on ttyS0. (Rx & Tx only) */
-        at91_register_uart(0, 0, 0);
-
-        /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-        at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-                                                | ATMEL_UART_DTR | ATMEL_UART_DSR
-                                                | ATMEL_UART_DCD | ATMEL_UART_RI);
-
-        /* set serial console to ttyS0 (ie, DBGU) */
-        at91_set_serial_console(0);
 }
 
 static void __init init_irq(void)
@@ -156,7 +154,7 @@ static struct at91_udc_data __initdata portuxg20_udc_data = {
         .pullup_pin     = 0,            /* pull-up driven by UDC */
 };
 
-static struct at91_udc_data __initdata stamp9g20_udc_data = {
+static struct at91_udc_data __initdata stamp9g20evb_udc_data = {
         .vbus_pin       = AT91_PIN_PA22,
         .pullup_pin     = 0,            /* pull-up driven by UDC */
 };
@@ -190,7 +188,7 @@ static struct gpio_led portuxg20_leds[] = {
         }
 };
 
-static struct gpio_led stamp9g20_leds[] = {
+static struct gpio_led stamp9g20evb_leds[] = {
         {
                 .name                   = "D8",
                 .gpio                   = AT91_PIN_PB18,
@@ -250,7 +248,7 @@ void add_w1(void)
 }
 
 
-static void __init generic_board_init(void)
+void __init stamp9g20_board_init(void)
 {
         /* Serial */
         at91_add_device_serial();
@@ -262,34 +260,40 @@ static void __init generic_board_init(void)
 #else
         at91_add_device_mmc(0, &mmc_data);
 #endif
-        /* USB Host */
-        at91_add_device_usbh(&usbh_data);
-        /* Ethernet */
-        at91_add_device_eth(&macb_data);
-        /* I2C */
-        at91_add_device_i2c(NULL, 0);
         /* W1 */
         add_w1();
 }
 
 static void __init portuxg20_board_init(void)
 {
-        generic_board_init();
-        /* SPI */
-        at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices));
+        stamp9g20_board_init();
+        /* USB Host */
+        at91_add_device_usbh(&usbh_data);
         /* USB Device */
         at91_add_device_udc(&portuxg20_udc_data);
+        /* Ethernet */
+        at91_add_device_eth(&macb_data);
+        /* I2C */
+        at91_add_device_i2c(NULL, 0);
+        /* SPI */
+        at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices));
         /* LEDs */
         at91_gpio_leds(portuxg20_leds, ARRAY_SIZE(portuxg20_leds));
 }
 
-static void __init stamp9g20_board_init(void)
+static void __init stamp9g20evb_board_init(void)
 {
-        generic_board_init();
+        stamp9g20_board_init();
+        /* USB Host */
+        at91_add_device_usbh(&usbh_data);
         /* USB Device */
-        at91_add_device_udc(&stamp9g20_udc_data);
+        at91_add_device_udc(&stamp9g20evb_udc_data);
+        /* Ethernet */
+        at91_add_device_eth(&macb_data);
+        /* I2C */
+        at91_add_device_i2c(NULL, 0);
         /* LEDs */
-        at91_gpio_leds(stamp9g20_leds, ARRAY_SIZE(stamp9g20_leds));
+        at91_gpio_leds(stamp9g20evb_leds, ARRAY_SIZE(stamp9g20evb_leds));
 }
 
 MACHINE_START(PORTUXG20, "taskit PortuxG20")
@@ -305,7 +309,7 @@ MACHINE_START(STAMP9G20, "taskit Stamp9G20")
         /* Maintainer: taskit GmbH */
         .boot_params    = AT91_SDRAM_BASE + 0x100,
         .timer          = &at91sam926x_timer,
-        .map_io         = stamp9g20_map_io,
+        .map_io         = stamp9g20evb_map_io,
         .init_irq       = init_irq,
-        .init_machine   = stamp9g20_board_init,
+        .init_machine   = stamp9g20evb_board_init,
 MACHINE_END