at91: introduce commom AT91_BASE_SYS

On all at91 except rm9200 and x40 have the System Controller starts
at address 0xffffc000 and has a size of 16KiB.

On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting
at 0xfffff000

This patch removes the individual definitions of AT91_BASE_SYS and
replaces them with a common version at base 0xfffffc000 and size 16KiB
and map the same memory space

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>

1 files changed, 2 insertions, 2 deletions

diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index b60c22b6e241..d8e0aa08009a 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -57,7 +57,7 @@
 static void __init ek_init_early(void)
 {
         /* Initialize processor: 18.432 MHz crystal */
-        at91sam9261_initialize(18432000);
+        at91_initialize(18432000);
 
         /* Setup the LEDs */
         at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
@@ -621,7 +621,7 @@ MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
 #endif
         /* Maintainer: Atmel */
         .timer          = &at91sam926x_timer,
-        .map_io         = at91sam9261_map_io,
+        .map_io         = at91_map_io,
         .init_early     = ek_init_early,
         .init_irq       = ek_init_irq,
         .init_machine   = ek_board_init,