[ARM] 4905/1: [AT91] Atmel SAM9 boards updated to new-style UART initialization

Convert the Atmel SAM9260-EK, SAM9261-EK, SAM9263-EK and SAM9RL-EK
boards to use the new-style UART initialization.

Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 5 insertions, 13 deletions

diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index f71ff750b3d2..3c73825b58de 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -49,17 +49,6 @@
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 2 = USART0 .. USART2
- *    3      = DBGU
- */
-static struct at91_uart_config __initdata ek_uart_config = {
-        .console_tty    = 0,                            /* ttyS0 */
-        .nr_tty         = 1,
-        .tty_map        = { 3, -1, -1, -1 }             /* ttyS0, ..., ttyS3 */
-};
-
 static void __init ek_map_io(void)
 {
         /* Initialize processor: 18.432 MHz crystal */
@@ -68,8 +57,11 @@ static void __init ek_map_io(void)
         /* Setup the LEDs */
         at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
 
-        /* Setup the serial ports and console */
-        at91_init_serial(&ek_uart_config);
+        /* DGBU on ttyS0. (Rx & Tx only) */
+        at91_register_uart(0, 0, 0);
+
+        /* set serial console to ttyS0 (ie, DBGU) */
+        at91_set_serial_console(0);
 }
 
 static void __init ek_init_irq(void)