[ARM] 5289/1: [AT91] Convert boards to use sam9_smc_configure()

Convert the SAM9 and CAP9 board-specific files to make use of the
sam9_smc_configure() method to configure the memory-controller for
external peripherals.

The following boards have been modified:
 cam60 : NAND
 cap9adk : NAND, NOR
 qil-a9260 : NAND
 sam9-l9260 : NAND
 sam9260ek : NAND
 sam9261ek : DM9000 Ethernet, NAND
 sam9263 : NAND
 sam9g20ek : NAND
 sam9rlek : NAND
 usb-a9260 : NAND
 usb-a9263 .: NAND

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 29 insertions, 6 deletions

diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 99bb4cc23a09..b48346977534 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -38,7 +38,9 @@
 
 #include <mach/board.h>
 #include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
 
+#include "sam9_smc.h"
 #include "generic.h"
 
 
@@ -148,13 +150,34 @@ static struct atmel_nand_data __initdata ek_nand_data = {
         .rdy_pin        = AT91_PIN_PC13,
         .enable_pin     = AT91_PIN_PC14,
         .partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
-        .bus_width_16   = 1,
-#else
-        .bus_width_16   = 0,
-#endif
 };
 
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+        .ncs_read_setup         = 0,
+        .nrd_setup              = 1,
+        .ncs_write_setup        = 0,
+        .nwe_setup              = 1,
+
+        .ncs_read_pulse         = 3,
+        .nrd_pulse              = 3,
+        .ncs_write_pulse        = 3,
+        .nwe_pulse              = 3,
+
+        .read_cycle             = 5,
+        .write_cycle            = 5,
+
+        .mode                   = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+        .tdf_cycles             = 2,
+};
+
+static void __init ek_add_device_nand(void)
+{
+        /* configure chip-select 3 (NAND) */
+        sam9_smc_configure(3, &ek_nand_smc_config);
+
+        at91_add_device_nand(&ek_nand_data);
+}
+
 
 /*
  * MCI (SD/MMC)
@@ -178,7 +201,7 @@ static void __init ek_board_init(void)
         /* SPI */
         at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
         /* NAND */
-        at91_add_device_nand(&ek_nand_data);
+        ek_add_device_nand();
         /* Ethernet */
         at91_add_device_eth(&ek_macb_data);
         /* MMC */