[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach

This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 207 insertions, 0 deletions

diff --git a/arch/arm/mach-aaec2000/include/mach/aaec2000.h b/arch/arm/mach-aaec2000/include/mach/aaec2000.h
new file mode 100644
index 000000000000..bc729c42f843
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/aaec2000.h
@@ -0,0 +1,207 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/aaec2000.h
+ *
+ *  AAEC-2000 registers definition
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_AAEC2000_H
+#define __ASM_ARCH_AAEC2000_H
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#error You must include hardware.h not this file
+#endif /* __ASM_ARCH_HARDWARE_H */
+
+/* Chip selects */
+#define AAEC_CS0        0x00000000
+#define AAEC_CS1        0x10000000
+#define AAEC_CS2        0x20000000
+#define AAEC_CS3        0x30000000
+
+/* Flash */
+#define AAEC_FLASH_BASE AAEC_CS0
+#define AAEC_FLASH_SIZE SZ_64M
+
+/* Interrupt controller */
+#define IRQ_BASE        __REG(0x80000500)
+#define IRQ_INTSR       __REG(0x80000500)       /* Int Status Register */
+#define IRQ_INTRSR      __REG(0x80000504)       /* Int Raw (unmasked) Status */
+#define IRQ_INTENS      __REG(0x80000508)       /* Int Enable Set */
+#define IRQ_INTENC      __REG(0x8000050c)       /* Int Enable Clear */
+
+/* UART 1 */
+#define UART1_BASE      __REG(0x80000600)
+#define UART1_DR        __REG(0x80000600) /* Data/FIFO Register */
+#define UART1_LCR       __REG(0x80000604) /* Link Control Register */
+#define UART1_BRCR      __REG(0x80000608) /* Baud Rate Control Register */
+#define UART1_CR        __REG(0x8000060c) /* Control Register */
+#define UART1_SR        __REG(0x80000610) /* Status Register */
+#define UART1_INT       __REG(0x80000614) /* Interrupt Status Register */
+#define UART1_INTM      __REG(0x80000618) /* Interrupt Mask Register */
+#define UART1_INTRES    __REG(0x8000061c) /* Int Result (masked status) Register */
+
+/* UART 2 */
+#define UART2_BASE      __REG(0x80000700)
+#define UART2_DR        __REG(0x80000700) /* Data/FIFO Register */
+#define UART2_LCR       __REG(0x80000704) /* Link Control Register */
+#define UART2_BRCR      __REG(0x80000708) /* Baud Rate Control Register */
+#define UART2_CR        __REG(0x8000070c) /* Control Register */
+#define UART2_SR        __REG(0x80000710) /* Status Register */
+#define UART2_INT       __REG(0x80000714) /* Interrupt Status Register */
+#define UART2_INTM      __REG(0x80000718) /* Interrupt Mask Register */
+#define UART2_INTRES    __REG(0x8000071c) /* Int Result (masked status) Register */
+
+/* UART 3 */
+#define UART3_BASE      __REG(0x80000800)
+#define UART3_DR        __REG(0x80000800) /* Data/FIFO Register */
+#define UART3_LCR       __REG(0x80000804) /* Link Control Register */
+#define UART3_BRCR      __REG(0x80000808) /* Baud Rate Control Register */
+#define UART3_CR        __REG(0x8000080c) /* Control Register */
+#define UART3_SR        __REG(0x80000810) /* Status Register */
+#define UART3_INT       __REG(0x80000814) /* Interrupt Status Register */
+#define UART3_INTM      __REG(0x80000818) /* Interrupt Mask Register */
+#define UART3_INTRES    __REG(0x8000081c) /* Int Result (masked status) Register */
+
+/* These are used in some places */
+#define _UART1_BASE __PREG(UART1_BASE)
+#define _UART2_BASE __PREG(UART2_BASE)
+#define _UART3_BASE __PREG(UART3_BASE)
+
+/* UART Registers Offsets */
+#define UART_DR         0x00
+#define UART_LCR        0x04
+#define UART_BRCR       0x08
+#define UART_CR         0x0c
+#define UART_SR         0x10
+#define UART_INT        0x14
+#define UART_INTM       0x18
+#define UART_INTRES     0x1c
+
+/* UART_LCR Bitmask */
+#define UART_LCR_BRK    (1 << 0) /* Send Break */
+#define UART_LCR_PEN    (1 << 1) /* Parity Enable */
+#define UART_LCR_EP     (1 << 2) /* Even/Odd Parity */
+#define UART_LCR_S2     (1 << 3) /* One/Two Stop bits */
+#define UART_LCR_FIFO   (1 << 4) /* FIFO Enable */
+#define UART_LCR_WL5    (0 << 5) /* Word Length - 5 bits */
+#define UART_LCR_WL6    (1 << 5) /* Word Length - 6 bits */
+#define UART_LCR_WL7    (1 << 6) /* Word Length - 7 bits */
+#define UART_LCR_WL8    (1 << 7) /* Word Length - 8 bits */
+
+/* UART_CR Bitmask */
+#define UART_CR_EN      (1 << 0) /* UART Enable */
+#define UART_CR_SIR     (1 << 1) /* IrDA SIR Enable */
+#define UART_CR_SIRLP   (1 << 2) /* Low Power IrDA Enable */
+#define UART_CR_RXP     (1 << 3) /* Receive Pin Polarity */
+#define UART_CR_TXP     (1 << 4) /* Transmit Pin Polarity */
+#define UART_CR_MXP     (1 << 5) /* Modem Pin Polarity */
+#define UART_CR_LOOP    (1 << 6) /* Loopback Mode */
+
+/* UART_SR Bitmask */
+#define UART_SR_CTS     (1 << 0) /* Clear To Send Status */
+#define UART_SR_DSR     (1 << 1) /* Data Set Ready Status */
+#define UART_SR_DCD     (1 << 2) /* Data Carrier Detect Status */
+#define UART_SR_TxBSY   (1 << 3) /* Transmitter Busy Status */
+#define UART_SR_RxFE    (1 << 4) /* Receive FIFO Empty Status */
+#define UART_SR_TxFF    (1 << 5) /* Transmit FIFO Full Status */
+#define UART_SR_RxFF    (1 << 6) /* Receive FIFO Full Status */
+#define UART_SR_TxFE    (1 << 7) /* Transmit FIFO Empty Status */
+
+/* UART_INT Bitmask */
+#define UART_INT_RIS    (1 << 0) /* Rx Interrupt */
+#define UART_INT_TIS    (1 << 1) /* Tx Interrupt */
+#define UART_INT_MIS    (1 << 2) /* Modem Interrupt */
+#define UART_INT_RTIS   (1 << 3) /* Receive Timeout Interrupt */
+
+/* Timer 1 */
+#define TIMER1_BASE     __REG(0x80000c00)
+#define TIMER1_LOAD     __REG(0x80000c00)       /* Timer 1 Load Register */
+#define TIMER1_VAL      __REG(0x80000c04)       /* Timer 1 Value Register */
+#define TIMER1_CTRL     __REG(0x80000c08)       /* Timer 1 Control Register */
+#define TIMER1_CLEAR    __REG(0x80000c0c)       /* Timer 1 Clear Register */
+
+/* Timer 2 */
+#define TIMER2_BASE     __REG(0x80000d00)
+#define TIMER2_LOAD     __REG(0x80000d00)       /* Timer 2 Load Register */
+#define TIMER2_VAL      __REG(0x80000d04)       /* Timer 2 Value Register */
+#define TIMER2_CTRL     __REG(0x80000d08)       /* Timer 2 Control Register */
+#define TIMER2_CLEAR    __REG(0x80000d0c)       /* Timer 2 Clear Register */
+
+/* Timer 3 */
+#define TIMER3_BASE     __REG(0x80000e00)
+#define TIMER3_LOAD     __REG(0x80000e00)       /* Timer 3 Load Register */
+#define TIMER3_VAL      __REG(0x80000e04)       /* Timer 3 Value Register */
+#define TIMER3_CTRL     __REG(0x80000e08)       /* Timer 3 Control Register */
+#define TIMER3_CLEAR    __REG(0x80000e0c)       /* Timer 3 Clear Register */
+
+/* Timer Control register bits */
+#define TIMER_CTRL_ENABLE       (1 << 7) /* Enable (Start Timer) */
+#define TIMER_CTRL_PERIODIC     (1 << 6) /* Periodic Running Mode */
+#define TIMER_CTRL_FREE_RUNNING (0 << 6) /* Normal Running Mode */
+#define TIMER_CTRL_CLKSEL_508K  (1 << 3) /* 508KHz Clock select (Timer 1, 2) */
+#define TIMER_CTRL_CLKSEL_2K    (0 << 3) /* 2KHz Clock Select (Timer 1, 2) */
+
+/* Power and State Control */
+#define POWER_BASE      __REG(0x80000400)
+#define POWER_PWRSR     __REG(0x80000400) /* Power Status Register */
+#define POWER_PWRCNT    __REG(0x80000404) /* Power/Clock control */
+#define POWER_HALT      __REG(0x80000408) /* Power Idle Mode */
+#define POWER_STDBY     __REG(0x8000040c) /* Power Standby Mode */
+#define POWER_BLEOI     __REG(0x80000410) /* Battery Low End of Interrupt */
+#define POWER_MCEOI     __REG(0x80000414) /* Media Changed EoI */
+#define POWER_TEOI      __REG(0x80000418) /* Tick EoI */
+#define POWER_STFCLR    __REG(0x8000041c) /* NbFlg, RSTFlg, PFFlg, CLDFlg Clear */
+#define POWER_CLKSET    __REG(0x80000420) /* Clock Speed Control */
+
+/* GPIO Registers */
+#define AAEC_GPIO_PHYS  0x80000e00
+
+#define AAEC_GPIO_PADR          __REG(AAEC_GPIO_PHYS + 0x00)
+#define AAEC_GPIO_PBDR          __REG(AAEC_GPIO_PHYS + 0x04)
+#define AAEC_GPIO_PCDR          __REG(AAEC_GPIO_PHYS + 0x08)
+#define AAEC_GPIO_PDDR          __REG(AAEC_GPIO_PHYS + 0x0c)
+#define AAEC_GPIO_PADDR         __REG(AAEC_GPIO_PHYS + 0x10)
+#define AAEC_GPIO_PBDDR         __REG(AAEC_GPIO_PHYS + 0x14)
+#define AAEC_GPIO_PCDDR         __REG(AAEC_GPIO_PHYS + 0x18)
+#define AAEC_GPIO_PDDDR         __REG(AAEC_GPIO_PHYS + 0x1c)
+#define AAEC_GPIO_PEDR          __REG(AAEC_GPIO_PHYS + 0x20)
+#define AAEC_GPIO_PEDDR         __REG(AAEC_GPIO_PHYS + 0x24)
+#define AAEC_GPIO_KSCAN         __REG(AAEC_GPIO_PHYS + 0x28)
+#define AAEC_GPIO_PINMUX        __REG(AAEC_GPIO_PHYS + 0x2c)
+#define AAEC_GPIO_PFDR          __REG(AAEC_GPIO_PHYS + 0x30)
+#define AAEC_GPIO_PFDDR         __REG(AAEC_GPIO_PHYS + 0x34)
+#define AAEC_GPIO_PGDR          __REG(AAEC_GPIO_PHYS + 0x38)
+#define AAEC_GPIO_PGDDR         __REG(AAEC_GPIO_PHYS + 0x3c)
+#define AAEC_GPIO_PHDR          __REG(AAEC_GPIO_PHYS + 0x40)
+#define AAEC_GPIO_PHDDR         __REG(AAEC_GPIO_PHYS + 0x44)
+#define AAEC_GPIO_RAZ           __REG(AAEC_GPIO_PHYS + 0x48)
+#define AAEC_GPIO_INTTYPE1      __REG(AAEC_GPIO_PHYS + 0x4c)
+#define AAEC_GPIO_INTTYPE2      __REG(AAEC_GPIO_PHYS + 0x50)
+#define AAEC_GPIO_FEOI          __REG(AAEC_GPIO_PHYS + 0x54)
+#define AAEC_GPIO_INTEN         __REG(AAEC_GPIO_PHYS + 0x58)
+#define AAEC_GPIO_INTSTATUS     __REG(AAEC_GPIO_PHYS + 0x5c)
+#define AAEC_GPIO_RAWINTSTATUS  __REG(AAEC_GPIO_PHYS + 0x60)
+#define AAEC_GPIO_DB            __REG(AAEC_GPIO_PHYS + 0x64)
+#define AAEC_GPIO_PAPINDR       __REG(AAEC_GPIO_PHYS + 0x68)
+#define AAEC_GPIO_PBPINDR       __REG(AAEC_GPIO_PHYS + 0x6c)
+#define AAEC_GPIO_PCPINDR       __REG(AAEC_GPIO_PHYS + 0x70)
+#define AAEC_GPIO_PDPINDR       __REG(AAEC_GPIO_PHYS + 0x74)
+#define AAEC_GPIO_PEPINDR       __REG(AAEC_GPIO_PHYS + 0x78)
+#define AAEC_GPIO_PFPINDR       __REG(AAEC_GPIO_PHYS + 0x7c)
+#define AAEC_GPIO_PGPINDR       __REG(AAEC_GPIO_PHYS + 0x80)
+#define AAEC_GPIO_PHPINDR       __REG(AAEC_GPIO_PHYS + 0x84)
+
+#define AAEC_GPIO_PINMUX_PE0CON         (1 << 0)
+#define AAEC_GPIO_PINMUX_PD0CON         (1 << 1)
+#define AAEC_GPIO_PINMUX_CODECON        (1 << 2)
+#define AAEC_GPIO_PINMUX_UART3CON       (1 << 3)
+
+/* LCD Controller */
+#define AAEC_CLCD_PHYS  0x80003000
+
+#endif /* __ARM_ARCH_AAEC2000_H */